Brief introduction of 78551-60-7

As the paragraph descriping shows that 78551-60-7 is playing an increasingly important role.

78551-60-7, tert-Butyl 4-benzyl-3-oxopiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,78551-60-7

4 M HC1 in l,4-dioxane (150 mL, 600 mmol, 12 equiv) was added at room temperature to compound (14.5 g, 50 mmol, 1 equiv) and the mixture was stirred at room temperature for 2 hours, at which time LCMS indicated that the reaction was complete. The mixture was concentrated under reduced pressure and azeotroped with toluene (3 x 200 mL) to give l-benzylpiperazin-2-one hydrochloride (15.1 g, quantitative yield) as a viscous pale-yellow oil

As the paragraph descriping shows that 78551-60-7 is playing an increasingly important role.

Reference£º
Patent; CONATUS PHARMACEUTICALS, INC.; SPADA, Alfred, P.; TERNANSKY, Robert, J.; (0 pag.)WO2020/6341; (2020); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 103-76-4

The synthetic route of 103-76-4 has been constantly updated, and we look forward to future research findings.

103-76-4, N-(2-Hydroxyethyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,103-76-4

A solution of 3,7-dichloro-1-(2-propoxyethyl)pyrido[3,4-b]pyrazin-2(1H)-one (200 mg, 0.66 mmol), 1-(2-hydroxyethyl)piperazine (117 mg, 0.90 mmol, Aldrich) and triethylamine (0.27 mL, 1.94 mmol) in THF (3 mL) was stirred at room temperature for one hour. The reaction was partitioned between ethyl acetate and water. The layers were separated and the aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with brine, dried over magnesium sulfate, and solvent was removed at reduced pressure to give 7-chloro-3-[4-(2-hydroxyethyl)piperazin-1-yl]-1-(2-propoxyethyl)pyrido[3,4-b]pyrazin-2(1H)-one. (218 mg, 83% yield). 1H NMR (CDCl3) delta 8.48 (1H), 7.34 (1H), 4.33-4.30 (2H), 4.04-4.00 (4H), 3.76-3.72 (2H), 3.69-3.65 (2H), 3.38-3.34 (2H), 2.67-2.64 (4H), 2.62-2.58 (2H), 1.55-1.48 (2H), 0.87-0.82 (3H).

The synthetic route of 103-76-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer Inc; US2007/249615; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 934-98-5

The synthetic route of 934-98-5 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.934-98-5,2-(4-Methylpiperazin-1-yl)ethanamine,as a common compound, the synthetic route is as follows.,934-98-5

Preparation of Compound 177 (Method D) 2-[2,7-bis[2-[(2R,3S,4R,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)tetrahydropyran-2- yl]ethynyl]carbazol-9-yl]-N-[2-(4-methylpiperazin-l-yl)ethyl]acetamide To a stirred solution of 2-(4-methylpiperazin-l-yl)ethanamine (7.7 mg, 0.054 mmol) and Et3N (20 mu) in DMF (0.3 mL) is added a premixed solution of Compound 176 and HATU (23 mg, 0.061 mmol) in DMF (0.4 mL). Reaction mixture is stirred at RT for 3 h and the mixture is purified directly by reverse phase HPLC to afford the title compound (16 mg, 40percent yield). NMR (400 MHz, CD3OD) delta 8.38 (brs, 1H), 8.11 (d, J = 8.1 Hz, 2H), 7.63 (s, 2H), 7.36 (dd, J = 8.1, 1.2 Hz, 2H), 5.04 (s, 2H), 4.90 (d, J = 2.1 Hz, 2H), 4.03 (dd, J = 3.2, 2.2 Hz, 2H), 3.96 (dd, J = 9.3, 3.3 Hz, 2H), 3.91 – 3.81 (m, 4H), 3.73 (dd, J = 11.3, 5.8 Hz, 2H), 3.63 (t, J = 9.4 Hz, 2H), 2.64 (s, 3H), 2.46 (t, J = 6.0 Hz, 2H). XH NMR (400 MHz, DMSO-D6) delta 8.17 (d, J = 8.1 Hz, 2H), 8.08 (t, J = 5.6 Hz, 1H), 7.64 (s, 2H), 7.30 – 7.25 (m, 2H), 5.06 (s, 2H), 4.76 (d, J = 2.0 Hz, 2H), 3.83 (s, 2H), 3.77 – 3.65 (m, 4H), 3.63 – 3.55 (m, 2H), 3.46 (dd, J = 11.7, 6.2 Hz, 2H), 3.39 (t, J = 9.3 Hz, 2H), 3.16 (dd, J = 12.1, 6.2 Hz, 2H), 2.40 – 2.16 (m, 10H), 2.11 (s, 3H). ESI-MS m/z calc. 722.3163, found 723.71 (M+l)+.

The synthetic route of 934-98-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; VERTEX PHARMACEUTICALS INCORPORATED; RAMTOHUL, Yeeman, K.; DAS, Sanjoy, Kumar; CADILHAC, Caroline; REDDY, Thumkunta, Jagadeeswar; VAILLANCOURT, Louis; GALLANT, Michel; LIU, Bingcan; DIETRICH, Evelyne; VALLEE, Frederic; MARTEL, Julien; POISSON, Carl; WO2014/100158; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Simple exploration of 120737-78-2

120737-78-2 tert-Butyl 2-methylpiperazine-1-carboxylate 15087784, apiperazines compound, is more and more widely used in various fields.

120737-78-2, tert-Butyl 2-methylpiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2-Methyl-4-pyrimidin-2-yl-piperazine- 1 -carboxylic acid tert-butyl ester 100 mg 2-chloro-pyrimidine was added to 175 mg 2-Methyl-piperazine-l -carboxylic acid tert- butyl ester and this mixture was stirred for 2 h at 120 C to give 240 mg of the desired compound. Rt: 1.31 min (method B), (M+H)+: 279, 120737-78-2

120737-78-2 tert-Butyl 2-methylpiperazine-1-carboxylate 15087784, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRAUERT, Matthias; BISCHOFF, Daniel; DAHMANN, Georg; KUELZER, Raimund; RUDOLF, Klaus; WELLENZOHN, Bernd; WO2013/83741; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 132710-90-8

As the paragraph descriping shows that 132710-90-8 is playing an increasingly important role.

132710-90-8, 1-Boc-4-(3-hydroxypropyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,132710-90-8

The 6- {4-[4-(3-piperazin- 1 -ylpropoxy)phenyl]piperazin- 1 -yl} -3-(trifluoromethyl)-7,8- dihydro[l,2,4]triazolo[4,3-b]pyridazine used as starting material was prepared as follows:-; Preparation of tert-butyl 4-[3-(4-{4-[3-(trifluoromethyl)[l,2,4]triazolo[4,3- b]pyridazin-6-yl]piperazin-l-yl}phenoxy)propyl]piperazine-l-carboxylate; DIAD (3.24 mL, 16.47 mmol) was added dropwise to 4-{4-[3- (trifluoromethyl)[ 1 ,2,4]triazolo[4,3-b]pyridazin-6-yl]piperazin- 1 -yl}phenol (obtained as described in Example 16, preparation of starting materials) (5 g, 13.72 mmol), tert-butyl 4- (3-hydroxypropyl)piperazine-l-carboxylate (CAS 132710-90-8, 5.03 g, 20.59 mmol) and triphenylphosphine (5.40 g, 20.59 mmol) in THF (50 mL) at 00C under nitrogen. The resulting solution was stirred at ambient temperature for 16 hours. The reaction mixture was evaporated to dryness and redissolved in DCM (100 mL), and washed sequentially with 2M NaOH (100 mL) and saturated brine (100 mL). The organic layer was dried over MgSO4, filtered and evaporated to afford crude product. The crude product was purified by flash silica chromatography, eluting with EtOAc. Pure fractions were evaporated to dryness to give tert-butyl 4-[3-(4-{4-[3-(trifluoromethyl)[l,2,4]t?azolo[4,3-b]pyridazin-6- yl]piperazin-l-yl}phenoxy)propyl]piperazine-l-carboxylate (3.66 g, 45%). IH NMR (399.9 MHz, CDC13) delta 1.46 (9H, s), 1.95 (2H, m), 2.40 (4H, m), 2.52 (2H, t), 3.21 (4H, m), 3.43 (4H, m), 3.78 (4H, m), 3.99 (2H, t), 6.87 (2H, d), 6.93 (2H, d), 7.11 (IH, d), 7.96 (IH, d); m/z = 591 [M+H]+.

As the paragraph descriping shows that 132710-90-8 is playing an increasingly important role.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BRADBURY, Robert, Hugh; CARR, Gregory, Richard; RABOW, Alfred, Arthur; RAO KORUPOJU, Srinivasa; TUMMA, Harikrishna; WO2010/92371; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 140447-78-5

The synthetic route of 140447-78-5 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.140447-78-5,1-(2-N-Boc-Aminoethyl)piperazine,as a common compound, the synthetic route is as follows.

In a sealed tube, 8-bromo-7-fluoro-2-(methyloxy)-1 ,5-naphthyridine (1.1 g, 4.3 mmol), 1 ,1 -dimethylethyl [2-(1-piperazinyl)ethyl]carbamate (1 g, 4.3 mmol), Pd2dba3 (271 mg, 0.262 mmol), rac-Binap (163 mg, 0.262 mmol), Cs2CO3 (2.98 mg, 9.2 mmol) and 18- C-6 (115 mg, 0.436 mmol) in dioxane (22 ml_) were combined and flushed with N2. After 15min, the tube was sealed and heated to 1000C while stirring rapidly. After 12h, the solution was filtered, concentrated and the residue purified via column chromatography (silica,.1% MeOH in DCM (1% NH4OH)) yielding the title compound (725 mg, 41%) as an orange oil: LCMS (ES) m/e 406 (M+H)+., 140447-78-5

The synthetic route of 140447-78-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2006/81289; (2006); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 1235865-77-6

The synthetic route of 1235865-77-6 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1235865-77-6,2-((1H-Pyrrolo[2,3-b]pyridin-5-yl)oxy)-4-(4-((4′-chloro-5,5-dimethyl-3,4,5,6-tetrahydro-[1,1′-biphenyl]-2-yl)methyl)piperazin-1-yl)benzoic acid,as a common compound, the synthetic route is as follows.

A solution of 2 – ((lH-pyrrolo [2,3-b] pyridin-5-yl) oxy) -4- (4 – ((4′-chloro-5,5-dimethyl- 5,6-tetrahydro- [1,1′-biphenyl] -2-yl) methyl) piperazin-1-yl) benzoic acid (see Example 1, step 14) (60 mg, 0.105 mmol, 1.0 eq) (40 mg, 0.114 mmol, 1.09 eq) was added to DCM (10 mL) followed by EDCI (40 mg, 0.209 mmol, 1.99 eq) and 4 (4 mL), 2-nitro-4-sulfamoylphenyl trifluoromethanesulfonate (26mg, 0.213mmol, 2.03eq), room temperature reaction 3h, TLC point plate analysis, the basic reaction of acid raw materials, directly to the reaction liquid spin dry, column, PE / EA (v / v) = 1/1 Eluting with a pale yellow solid product 52 mg, yield 53.9%, 1235865-77-6

The synthetic route of 1235865-77-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sunshine Lake Pharma Co.,Ltd.; Kou, Yuhui; Hu, Bolin; Jiang, Haigang; Ye, Jiuyong; Liu, Zhiqiang; Xie, Hongming; Zhang, Yingjun; (42 pag.)CN106565706; (2017); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 74879-18-8

74879-18-8 (S)-(+)-2-Methylpiperazine 2734219, apiperazines compound, is more and more widely used in various fields.

74879-18-8, (S)-(+)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

C. Preparation of (S)-5-bromo-4-(3-methylpiperazin-1-yl)-7-(phenylsulfonyl)-7H-pyrrolo[2,3-d]pyrimidine. To a mixture of pyrrolopyrimidine from step B (76 mg, 0.2 mmol) and (S)-2-methylpiperazine (21 mg, 0.2 mmol) in isopropanol (2 ml) was added triethylamine (0.11 ml, 0.8 mmol). The mixture was heated at 80 C. for 5 mins via microwave and concentrated under vacuum to give crude (S)-5-bromo-4-(3-methylpiperazin-1-yl)-7-(phenylsulfonyl)-7H-pyrrolo[2,3-d]pyrimidine (65 mg, 0.15 mmol, 75%) which was used directly for the next step. MS (ES+) [M+H]+=437., 74879-18-8

74879-18-8 (S)-(+)-2-Methylpiperazine 2734219, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Harrison, Bryce Alden; Kimball, Spencer David; Mabon, Ross; Rawlins, David Brent; Rice, Dennis S.; Voronkov, Michael Victor; Zhang, Yulian; US2009/42893; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 74879-18-8

As the paragraph descriping shows that 74879-18-8 is playing an increasingly important role.

74879-18-8, (S)-(+)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

74879-18-8, To (S)-2-methyl piperazine (0.150 g, 1.5 mmol) was added 4-bromobenzotrifluoride (0.225g, 1.0 mmol), dichloro-bis(tri-o-tolyphosphine) palladium (II) (0.236 g, 0.3mmol), and sodium t-butoxide (0.144 g, 1.5 mmol), and toluene (2 mL) sequentially. After nitrogen was bubbled through the mixture for 15 minutes, the reaction was heated to lOO’C. The reaction was stirred at 1000C for 2 hr. The reaction was filtered through celite and concentrated under reduced pressure. The residue was then purified on a 1000 micron preparative thin layer chromatography plate eluting with 5% MeOH in dichloromethane to yield the title compound as an oil. IH NMR (500 MHz, CDCl3) delta 7.5 (d, 2H, J=8.7Hz), 6.95 (d, 2H, J = 8.7 Hz), 3.71 (d, 2H, J=IOHz), 3.20 (m, IH), 3.04 (m, 2H), 2.85 (m, 1H),2.48 (m, IH), 1.24 (d, 3H, J=7.2Hz). LC/MS 247 (M+l); HPLC 2.41 min

As the paragraph descriping shows that 74879-18-8 is playing an increasingly important role.

Reference£º
Patent; MERCK & CO., INC.; WO2007/70173; (2007); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 5464-12-0

As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.

5464-12-0, A one dram vial was charged with solid potassium tert-butoxide (54 mg, 0.48 mmol), 2-(4-methylpiperazin-l-yl)ethanol (0.075 g, 0.52 mmol), and tert-butanol (0.3 mL, 3.4 mmol). The mixture was stirred at ambient temperature for 30 minutes. N-(3-cyclopropyl-l-((l-methyl-2-oxo-l,2-dihydropyridin-3- yl)methyl)-lH-indazol-4-yl)-7-fluoroimidazo[l,2-a]pyridine-3-carboxamide (0.032 g, 0.070 mmol) was added in one portion. The mixture was heated at 88 ¡ãC with stirring for 16 hours. The mixture was cooled to ambient temperature and diluted with water until a precipitate formed. The precipitate was isolated by filtration and dried under high vacuum. Purification using silica preparative thin layer chromatography plate (20 x 20 cm, 0.5 mm) developed in a chamber with 10percent methanol/dichloromethane with 0.6percent concentrated ammonium hydroxide gave the product. MS (APCI), positive scan, m/z = 581.2 (M+).

As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

Reference£º
Patent; ARRAY BIOPHARMA INC.; BOYS, Mark Laurence; BRADLEY, Michael; DELISLE, Robert Kirk; HENNINGS, D. David; KENNEDY, April L.; MARMSATER, Fredrik P.; MEDINA, Matthew; MUNSON, Mark C.; RAST, Bryson; RIZZI, James P.; RODRIGUEZ, Martha E.; TOPALOV, George T.; ZHAO, Qian; WO2011/79076; (2011); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics