Tag: M.W:200-300

78551-60-7,78551-60-7, tert-Butyl 4-benzyl-3-oxopiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of diisopropylamine (667 mg, 6.59 mmol) in THF (5 ml) in a dryice-acetone bath was added 1.6 M butyllithium in hexanes (4.13 ml, 6.61 mmol).After 5 min the mixture was put in an ice-water bath and stirred for 20 min. Thesolution was cooled in the dry ice-acetone bath again and a solution of the product ofPreparative Example 1, Step 8 (1.74 g, 5.99 mmol) in THF (20 ml) was added. Themixture was stirred for 1 h. A solution of the above aldehyde in THF (30 ml) wasadded and the mixture was allowed to warm up to RT slowly and stirred for 16 h. Thereaction was quenched with saturated NH4CI (20 ml) and extracted with ether (3x100ml). The combined organic layer was washed with 5% citric acid, saturated NaHCO3,and brine, dried (Na2SO4), concentrated, and purified by column chromatography(gradient EtOAc/Hexanes 0-40%) to give the product (1.20 g, 35%). MS m/e 694

78551-60-7 tert-Butyl 4-benzyl-3-oxopiperazine-1-carboxylate 10891590, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; SCHERING CORPORATION; WO2006/14944; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

78818-15-2, Benzyl 3-oxopiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

b) 4-Methyl-l-(4-methyl-3′-nitro-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-6′-yl)- piperazin-2-one; To a solution of 6′-bromo-4-methyl-3′-niuO-3,4,5,6-tetrahydro-2H- [l,2′]bipyridinyl (as prepared in the previous step) (300 mg, 1.00 mmol) in toluene (5 mL) was added 3-oxo-piprazine-l-carboxylic acid benzyl ester (351 mg, 1.50 mmol), K3PO4 EPO (424 mg, 2.00 mmol) and CuI (38 mg, 0.20 mmol) followed by N,N’- dimethylethylenediamine (20 muL, 0.18 mmol) under Ar. The resulting mixture was heated at reflux overnight. The reaction mixture was allowed to cool to room temperature and filtered through a thin pad of Celite. The filtrate was concentrated in vacuo and the residue obtained was purified by chromatography on silica (20% EtOAc: hexane) to obtain 4-(4- methyl-3 ‘ -nitro-3 ,4,5 ,6-tetrahydro-2H- [1,2’ ]bipyridyl-6 ‘ -yl)-3 -oxo-piperazine- 1 – carboxylic acid benzyl ester (258 mg, 57%). This compound (453 mg, 1.00 mmol) was dissolved in 30% HBr/HOAc (1 mL). The resulting mixture was stirred at room temperature overnight and Et2O (20 mL) was added dropwise. The resulting mixture was stirred for another hour, the precipitated hydrobromide was collected by suction filtration, washed with Et2O (3×20 mL), dried in vacuo for 1 h and used directly in next step.The above hydrobromide (48 mg, 0.10 mmol) was added to 37% aq HCHO (ca. 0.05 mL, 0.05 mmol) followed by NaBH(OAc)3 (106 mg, 0.050 mmol). The resulting mixture was stirred at room temperature for 30 min and the product was extracted with CH2Cl2 (3×10 mL). The CH2Cl2 layers were combined, dried (Na2SO4) and concentrated in vacuo. The residue obtained was purified on silica (10-50% EtOAc:hexane) to obtain the title compound (27 mg, 81%). 1H-NMR (CDCl3; 400 MHz): delta 8.21 (d, IH, J=8.9 Hz), 7.58 (d, IH, J=8.9 Hz), 3.98 (m, 2H), 3.75 (m, 2H), 3.31 (s, 2H), 2.96 (m, 2H), 2.72 (m, 2H), 2.39 (s, 3H), 1.9-1.65 (m, 3H), 1.25 (m, 2H), 0.99 (d, 3H, J=6.42 Hz).

78818-15-2, 78818-15-2 Benzyl 3-oxopiperazine-1-carboxylate 736777, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2006/47504; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

30459-17-7, 1-(4-Trifluoromethylphenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,30459-17-7

General procedure: A solution of arylpiperazine (5.5 mmol) and triethylamine (0.8 mL;5.5 mmol) in anhydrous THF (20 mL) was added dropwise to a stirredsolution of an appropriate alkyl [2-/3-(bromoacetyl)phenyl]carbamate(5.5 mmol) in anhydrous THF (30 mL), and the mixture stirred for 3 h atambient temperature. The solvents were removed under reduced pressure,and added chloroform (100 mL) and water. The organic phase waswashed with additional water, dried over anhydrous sodium sulfate andthe solvent removed under reduced pressure, to give a solid crudeproduct, which was recrystallized from acetone.

The synthetic route of 30459-17-7 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Campos, Ludmila E.; Garibotto, Francisco M.; Angelina, Emilio; Kos, Jiri; Toma?i?, Tihomir; Zidar, Nace; Kikelj, Danijel; Gonec; Marvanova, Pavlina; Mokry, Petr; Jampilek; Alvarez, Sergio E.; Enriz, Ricardo D.; Bioorganic Chemistry; vol. 91; (2019);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

Cyclohexanecarboxaldehyde (145muL, 1.2mmol) and Boc-aminoethylpiperazine (229mg, 1mmol) were stirred in DCM (10ml) at room temperature for 30mins before the addition of STAB (424mg, 2mmol) and acetic acid (114mul_, 2mmol). The reaction was stirred at room temperature for 24hr before being quenched with 2M NaOH (20ml) and the product extracted with DCM (3 x 10ml). The combined organic layers were dried over Na2SO4, and concentrated in vacuo to yield a brown oil. The brown oil was dissolved in DCM (10ml) before the addition of triethylamine (278mul, 2mmol) and indole-3-glyoxylyl chloride (414mg, 2mmol). The reaction was stirred at room temperature for 24hr. The solvent was removed in vacuo and the reaction quenched with water (20ml). The product was extracted with EtOAc (3 x 20ml), and the combined organic layers were dried over Na2SO4, and concentrated in vacuo to yield the product, 4-(2- {cyclohexylmethyl-[2-(1H-indol-3-yl)-2-oxo-acetyl]-amino}-ethyl)-piperazine-1- carboxylic acid tert-butyl ester 84, as a brown oil which was carried through to the next step without further purification

192130-34-0, 192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; LECTUS THERAPEUTICS LIMITED; KHAN, Nawaz Mohammed; BURCKHARDT, Svenja; CRANSFIELD, Julie Elaine; VO, Ngoc-Tri; ARMER, Richard Edward; BOFFEY, Raymond John; WO2010/35032; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.122833-04-9,2-Methoxy-4-(4-methylpiperazin-1-yl)aniline,as a common compound, the synthetic route is as follows.

A solution of the product of EXAMPLE IF (500 mg, 1.40 mmol), 2-methoxy-4-(4- methylpiperazin- 1 -yl)aniline (321 mg, 1.68 mmol) and ^-toluenesulfonic acid (20 mg, cat.) in ?-butanol (10 mL) was heated at 100C for 18 hours. After cooling, the mixture was poured into saturated aqueous sodium bicarbonate (100 mL) and the solution was extracted with ethyl acetate (3 x 50 mL). The combined organic layers were dried over anhydrous sodium sulfate, filtered and concentrated. The residue was purified by flash chromatography on silica gel (200-300 mesh) eluting with 20/1 dichloromethane/methanol to afford the title compound. MS: 272.2 (M/2+ H+)., 122833-04-9

122833-04-9 2-Methoxy-4-(4-methylpiperazin-1-yl)aniline 20136253, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; ABBOTT LABORATORIES; VASUDEVAN, Anil; PENNING, Thomas, Dale; CHEN, Huanming; LIANG, Bo; WANG, Shaohui; ZHAO, Zhongqiang; CHAI, Dikun; YANG, Leifu; GAO, Yingxiang; WO2012/97479; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a schlenk-type flask, corresponding aliphatic amine (2 mmol) and intermediates Y-5 (0. 5 mmol) were dissolved in dry dioxane (5 mL), and then Pd2(dba)3 (0.05 mmol), XantPhos (0.05 mmol) and Cs2CO3 (7.5 mmol) were added. The mixture was refluxed to 105 °C while stirring under nitrogen atmosphere. The reaction was followed by TLC until its completion. After cooling, the solvent was evaporated under reduce pressure. The residue was purified by flash column chromatography using ethyl acetate/petroleum ether as eluent to give target compounds Ia-Im and IIa-IIm (except Ii and Iii). For Ii and IIi, the Boc group was further removed using CF3COOH to provide the two compounds., 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference：
Article; Yang, Jiapei; Chen, Wenmin; Kang, Dongwei; Lu, Xueyi; Li, Xiao; Liu, Zhaoqiang; Huang, Boshi; Daelemans, Dirk; Pannecouque, Christophe; De Clercq, Erik; Zhan, Peng; Liu, Xinyong; European Journal of Medicinal Chemistry; vol. 109; (2016); p. 294 – 304;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

303-26-4, 1-((4-Chlorophenyl)(phenyl)methyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 1 : Preparation of5-(4-((4-chlorophenyl)(phenyl)methyl)piperazin-l-yl)-N-(4-methylbenzyl)-3-meth yl-5-oxopentanamide; [147] [148] 0.5 mmol of 4-(4-methylbenzylcarbamoyl)-3-methylbutanoic acid prepared inPreparative Example 1, 0.55 mmol of l-(4-chlorobenzhydryl)piperazine, and ben- zotriazol-1-yloxytripyrrolidino phosphonium hexafluorophosphate (PyBOP) were added to 3 mL of dimethylformamide (DMF) to dissolve. Then, 1.0 mmol of N,N-diisopropylethylamine (DIEA) was added thereto, and stirred at room temperature for 16 hours. 20 mL of 10% HCl was put into the reaction solution, and extracted with 30 mL of EtOAc. The organic layer was washed with 20 mL of 10% HCl, and then washed with 20 mL of a saturated NaHCO solution twice and with 20 mL of a saturated NaCl solution twice. The organic layer was collected, dried over anhydrous MgSO 4 , and filtered under reduced pressure. The organic solvent in the filtrate was removed under reduced pressure. The residue was purified by column chromatography with a mixed solvent of EtOAc and methanol (20:1), so as to obtain the title compound (light yellow solid, yield: 65%).[149] mp 62-630C;[150] 1U NMR (CDCl ) delta 7.35 (d, J=8.0 Hz, 2CH), 7.29 (d, J=7.2 Hz, 2CH), 7.26 (t, J=8.2 Hz, 2CH), 7.22 (t, J=7.3 Hz, CH), 7.16 (d, J=8.0 Hz, 2CH), 7.11 (d, J=7.2 Hz, 2CH), 6.29 (s, NH), 4.37 (d, J=5.6 Hz, CH2), 4.21 (s, CH), 3.59 (t, J=5.6 Hz, CH2), 3.48 (q, J=5.6 Hz, CH2), 2.43 (d, J=6.8 Hz, CH2), 2.34-2.39 (m, CH2), 2.32 (s, CH3), 2.28 (d, J=6.0 Hz, CH ), 2.25 (d, J=6.4 Hz, CH ), 2.13-2.23 (m, CH), 1.03 (d, J=6.4 Hz, CH3);[151] HR-FABMS Calcd for C H ClN O : (M++l): 518.2574, Found: 518.2584.31 36 3 2

303-26-4, As the paragraph descriping shows that 303-26-4 is playing an increasingly important role.

Reference：
Patent; PARK CHOO, Hea-Young; WO2007/142431; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.694499-26-8,4-((4-Methylpiperazin-1-yl)methyl)-3-(trifluoromethyl)aniline,as a common compound, the synthetic route is as follows.

694499-26-8, To a stirred solution of XI (0.500 g, 2.7 mmol) and V (1.13 g, 4.14 mmol) in DMF (5 mL), wasadded DIPEA (1.4 mL, 8.28 mmol), HATU (2.0 g, 5.4 mmol) and reaction mixture was allowed to stir atRT for 3 h. After completion of reaction, reaction mixture was diluted with water and extracted with ethylacetate (75 mL x 3); saturated brine washing was given to the organic layer and dried over anhydrousNa2SO4. Organic layer was concentrated under vacuum to obtain the desired compound XII (1.0 g, 87%).LCMS: 437 [M+1]+

As the paragraph descriping shows that 694499-26-8 is playing an increasingly important role.

Reference：
Article; Ramachandran, Sreekanth A.; Jadhavar, Pradeep S.; Miglani, Sandeep K.; Singh, Manvendra P.; Kalane, Deepak P.; Agarwal, Anil K.; Sathe, Balaji D.; Mukherjee, Kakoli; Gupta, Ashu; Haldar, Srijan; Raja, Mohd; Singh, Siddhartha; Pham, Son M.; Chakravarty, Sarvajit; Quinn, Kevin; Belmar, Sebastian; Alfaro, Ivan E.; Higgs, Christopher; Bernales, Sebastian; Herrera, Francisco J.; Rai, Roopa; Bioorganic and Medicinal Chemistry Letters; vol. 27; 10; (2017); p. 2153 – 2160;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

262368-30-9, N-(4-Aminophenyl)-N-methyl-2-(4-methylpiperazin-1-yl)acetamide is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1-acetyl-3-(1-ethoxy-1-phenylmethylene)-6-methoxycarbonyl-2-indolinone (1.1 g, 3.07 mmol) and (0.91 g, 3.49 mmol) N-[(4-methyl-piperazin-1-yl)-methylcarbonyl]-N-methyl-p-phenylendiamine are dissolved in 10 ml dimethylformamide and mixed for 1 hour at 80 C. ;After cooling, 0.8 ml piperidine is added and the reaction is further mixed for 2 hours at room temperature. Water is added, the supernatant is removed by suction, and the precipitate is washed again with a small quantity of water. The residue is suspended in 10 ml methanol, the supernatant is removed by suction, and the remaining residue washed with 2 ml cold water and 2 ml diethyl ether. The resulting product is vacuum dried at 110 C. Yield 1.3 g. LCMS: m/z=540 (MH)+. 1HNMR (300 MHz, CDCl3), delta 12.20 (1H, s), 11.10 (1H, s), 7.60 (5H, m), 7.40 (1H, s), 7.20 (3H, m), 6.90-7.00 (2H, d, J=8.7 Hz), 5.80-6.00 (1H, d, J=8.4 Hz), 3.80-3.90 (3H, s), 3.10 (3H, s), 2.70-2.80 (2H, s), 2.20 (11H, s)., 262368-30-9

262368-30-9 N-(4-Aminophenyl)-N-methyl-2-(4-methylpiperazin-1-yl)acetamide 21927707, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Auspex Pharmaceuticals, Inc.; Rao, Tadimeti; Zhang, Chengzhi; US2015/284327; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.655225-01-7,tert-Butyl 4-(2-bromoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

655225-01-7, STEP A: Sodium hydride (60percent mineral oil dispersion) (13.21 mg, 0.330 mmol) is added under nitrogen to the solution of (E)-2-amino-7-(4-fluoro-2-pyridin-3-yl-phenyl)-4-methyl-7,8-dihydro-6H- quinazolin-5-one oxime (Intermediate 1) (0.1 g, 0.275 mmol) in anhydrous DMF (4 mL). After 5 min, N-Boc-4-(2-bromoethyl)piperazine (161 mg, 0.550 mmol) is added and the mixture is heated at 50°C for 1.5 h. The suspension is diluted with H20 and extracted with EtOAc. The organic phase is dried over Na2S04, filtered and concentrated under reduced pressure. The beige-orange residue is purified by flash column chromatography (eluent DCM/MeOH from 99/1 to 95/5) to give the expected compound (0.111 g, 0.193 mmol, Yield: 70percent). LC-MS: method A, rt=1.60 min; (ES+), M+H+= 576.5 1H-NMR (DMSO-d6) delta (ppm): 8.57 (dd, J=4.84, 1.61 Hz, 1 H); 8.53 (dd, J=2.2Q, 0.73 Hz, 1 H): 7.76 (ddd, J=7.92, 2.35, 1.76 Hz, 1 H); 7.66 (dd, J=8.80, 5.87 Hz, 1 H); 7.45 (ddd, J=7.78, 4.84, 0.88 Hz, 1 H); 7.31 (td, J=8.73, 2.79 Hz, 1 H); 7.1 1 (dd, J=9.68, 2.93 Hz, 1 H); 6.76 (s, 2 H); 4.15 (t, J=5.87 Hz, 2 H); 3.24-3.28 (m, 4 H); 2.94-3.08 (m, 2 H); 2.82-2.94 (m, 1 H); 2.54-2.66 (m, 4 H); 2.45 (s, 3 H); 2.32-2.39 (m, 4 H); 1.39 (s, 9 H)

As the paragraph descriping shows that 655225-01-7 is playing an increasingly important role.

Reference：
Patent; DAC SRL; AMICI, Raffaella; COLOMBO, Andrea; COURTNEY, Stephen Martin; MERCURIO, Ciro; MONTALBETTI, Christian Aldo Georges Napoleon; MORTONI, Annalisa; VARASI, Mario; WO2013/64919; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics