Heterocyclic Building Blocks-piperazine

325145-35-5, (S)-tert-Butyl 2-ethylpiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

325145-35-5, Example 2J kJlBOCA 250 ml round bottom flask was charged with A2 (4g, 15.9 mmol), 1-Boc-2-S-ethyl piperazine A3 (prepared as per Kiley et al Org. Prep. Proc. Int. 1990, 22, 761; 4.2 g, 18.6 mmol), tris(dibenzylideneacetone)dipalladium , (340 mg, 0.37 mmol), racemic-2,2′-bis(diphenylphosphino)-1 ,1′-binaphthyl (BINAP) (495 mg, 0.74 mmol), cesium carbonate (12g, 37.2 mmol) and toluene (80 ml). After the mixture was heated at 1003C for 16 h, fresh tris(dibenzylidene- acetone)dipalladium (340 mg, 0.37 mmol) and BINAP (495 mg, 0.74 mmol) were added and the heating was continued for 3 days. The solvent was removed in vacuo, and the residue was suspended in a 100 ml portion of ethyl acetate. This mixture was extracted with water and brine, dried over sodium sulfate, and concentrated in vacuo. Purification of the residue via silica gel flash chromatography (5percentmethanol/ 95percent DCM) yielded 5.3 g of a partially purified material which was used directly in the next step. M+H = 350

The synthetic route of 325145-35-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SCHERING CORPORATION; PHARMACOPEIA, INC.; WO2008/8453; (2008); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.169447-70-5,(S)-tert-Butyl 2-methylpiperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

Step I: tert-butyl (2S)-4-(4-bromophenyl)-2-methyl-piperazine-1-carboxylate (1-35) A mixture of 1-34 (10 g, 50 mmol), 1,4-dibromobenzene (29.4 g, 125 mmol), cesium carbonate (24.3 g, 75 mmol) and BINAP (1.5 g, 2.5 mmol) in 1,4-dioxane (250 mL) was degassed in a stream of argon for 15 minutes. To the mixture was added tris(dibenzylideneacetone)dipalladium(0) (0.900 g, 2.5 mmol), and the reaction mixture was again degassed for additional 15 minutes. After stirring at 90 C. for 18 hours, the volatiles were removed by evaporation, and the obtained residue was diluted with water (250 mL), followed by extraction with ethyl acetate (250 mL*3). The combined organic layers were washed with brine (50 mL), dried over anhydrous Na2SO4 and concentrated under reduced pressure. The obtained residue was purified by silica gel column chromatography (60-120 mesh) using 10% EtOAc in hexanes to give the desired product 1-35 as a white solid (5.5 g, 31%); LCMS: m/z 357.1 [M++1], 359.1 [M++2].

169447-70-5, The synthetic route of 169447-70-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KOUL, Summon; KURHADE, Suresh; BHOSALE, Sandeep; NAIK, Keshav; SALUNKHE, Videsh; MUNOT, Yogesh; BHUNIYA, Debnath; (132 pag.)US2017/8885; (2017); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1.Synthesis of 4-Ethyl-1-(4-nitrophenyl)piperazine To 4-fluoro-1-nitrobenzene(1 eq) in N,N-dimethylformamide was added Ethyl piperazine (2 eq) and N,N-diisopropylethyl amine (2 eq) and heated at 80 C. for 16 h.Concentrated the resultant mixture and partitioned between ethyl acetate and water.The organic layer was then washed with brine and dried with sodium sulfate and concentrated.Passed through a plug of silica to yield 4-Ethyl-1-(4-nitrophenyl)piperazine. MS: MH+=235., 5308-25-8

5308-25-8 1-Ethylpiperazine 79196, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Amiri, Payman; Fantl, Wendy; Levine, Barry Haskell; Poon, Daniel J.; Ramurthy, Savithri; Renhowe, Paul A.; Subramanian, Sharadha; Sung, Leonard; US2004/122237; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

502649-29-8,502649-29-8, 1-Boc-3-Benzylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a mixture of Pd(OAc)2 (0.054 g, 0.2 mmol), NaOtBu (0.64 g, 6.6 mmol) in xylene (7.0 mL) in a screw-capped tube was added tBu3P (0.049 g, 0.2 mmol). After 10 minutes a solution of 5-bromo-1-(tert-butyl-dimethyl-silanyl)-1H-indole (1.30 g, 4.4 mmol) in xylene (7.0 mL) and a solution of 3-benzyl-piperazine-1-carboxylic acid tert-butyl ester (1.34 g, 4.8 mmol) in xylene (8.0 mL) were added. The mixture was heated to 80 C. for 30 minutes, then cooled to room temperature. The reaction mixture was taken up in ethyl acetate, filtered through a pad of celite, and concentrated under reduced pressure. Purification via flash chromatography (gradient: 2% to 20% EtOAc in hexane) afforded 3-Benzyl-4-[1-(tert-butyl-dimethyl-silanyl)-1H-indol-5-yl]-piperazine-1-carboxylic acid tert-butyl ester (1.65 g, 74%) as a pale yellow solid; MS (M+H)=506.

The synthetic route of 502649-29-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Carter, David Scott; Schoenfeld, Ryan Craig; Weikert, Robert James; US2008/45543; (2008); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

34770-60-0, 4-Methylpiperazin-2-one is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 6.1.15. General procedure IV, for preparation of 14a-f A mixture of aryl bromide (1.0 mmol), 4-methylpiperazin-2-one (for compounds 15-17)/morpholin-3-one (for compounds 18-20) (2.0 mmol), N,N0-dimethylethylene diamine (0.1 mmol), K2CO3 (2.0 mmol) and CuI (0.05 mmol) in anhydrous toluene was heated to reflux with stirring for 6 h. Then the reaction mixture was cooled to room temperature, poured into water, stirred vigorously and extracted thrice with ethyl acetate, dried over anhydrous Na2SO4, concentrated under reduced pressure and purified by flash chromatography to afford compounds 14a-f in 54-68% yields. 6.1.18 1-(2-Fluoro-4-vinylphenyl)-4-methylpiperazin-2-one (14c) A mixture of 1-bromo-2-fluoro-4-vinylbenzene 3c (0.2 g, 0.99 mmol), 4-methylpiperazin-2-one (0.22 g, 1.99 mmol), N,N’-dimethylethylene diamine (0.008 g, 0.09 mmol), K2CO3 (0.27 g, 1.99 mmol) and CuI (0.009 g, 0.04 mmol) in anhydrous toluene was heated to reflux and the reaction was continued as described in general procedure IV to afford 14c (0.12 g) in 55% yield. 1H NMR (400 MHz, CDCl3): delta 7.18-7.24 (m, 3H), 6.66 (dd, J = 17.5, 10.8 Hz, 1H), 5.74 (d, J = 17.5 Hz, 1H), 5.32 (d, J = 10.8 Hz, 1H), 3.62-3.69 (m, 2H), 3.30 (s, 2H), 2.77-2.84 (m, 2H), 2.42 (s, 3H); LC-MS: 235 (M++1)., 34770-60-0

34770-60-0 4-Methylpiperazin-2-one 13704283, apiperazines compound, is more and more widely used in various fields.

Reference£º
Article; Rakesh; Bruhn, David; Maddox, Marcus; Lee, Robin B.; Yang, Lei; Lee, Richard E.; Madhura, Dora B.; Trivedi, Ashit; Meibohm, Bernd; Scherman, Michael S.; Gilliland, Janet C.; Gruppo, Veronica; McNeil, Michael R.; Lenaerts, Anne J.; Bioorganic and medicinal chemistry; vol. 20; 20; (2012); p. 6063 – 6072,10;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

67455-41-8, 4-(Piperazin-1-yl)aniline is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,67455-41-8

General procedure: A mixture of compounds 5a-5i (10.0 mmol), concentrated hydrochloricacid (12.2 mmol) and melamine (20.0 mmol) in isopropylalcohol (10.0 mL) was refluxed for 8 h. Progress of reaction wasmonitored by tlc and after complete conversion of starting materialreaction mixture was cooled to rt. The reaction mixture wasquenched in saturated sodium carbonate solution (20.0 mL) andfiltered. The solid was washed with water (50.0 mL). The crudeproduct thus obtainedwas dried at 50 C under reduced pressure toget compounds 6a-6i.

The synthetic route of 67455-41-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhao, Hui; Hu, Xiaoxia; Cao, Kai; Zhang, Yue; Zhao, Kuantao; Tang, Chunlei; Feng, Bainian; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 935 – 945;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.109-01-3,1-Methylpiperazine,as a common compound, the synthetic route is as follows.

A mixture [OF N-METHYLPIPERAZINE] (0. [0499MOL),] [2-BROMOETHANOL] (0. [0749MOL)] and [K2CO3] (0. [0998MOL)] in 2-butanon (90mL) was stirred for [4H] at [90¡ãC.] The cooled reaction mixture was filtered. The filtrate was evaporated. Yielding 90percent of intermediate 14. (Remark: lower yields were obtained on [A] higher scale and purification by short column chromatography was necessary)., 109-01-3

The synthetic route of 109-01-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2004/7498; (2004); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

208167-83-3, tert-Butyl 4-(2-chloroethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of [l-(3,5-dichloro-benzyl)-lH-imidazol-2-ylmethyl]-(3-fluoro-benzyl)- amine (146 mg, 0.4 mmol) in TEtaF (1 mL) at -78 0C was added dropwise a solution of n- BuLi in hexane (0.19 mL, 0.44 mmol) and the mixture stirred at -78 0C for 30 min. A solution of 4-(2-Chloro-ethyl)-piperazine-l-carboxylic acid tert-butyl ester (116 mg, 0.46 EPO mmol) in THF (1 mL) was then added dropwise and the mixture allowed to warm to ambient temperature before stirring for an additional 24 h. The reaction was quenched with water (10 mL) and extracted with CH2Cl2 (2 x 40 mL). The combined CH2Cl2 extracts were dried over Na2SO4 and concentrated in vacuo. The residue was purified by column chromatography (silica gel, 20:1 CH2Cl2ZMeOH) to provide 4-{2-[[l-(3,5- dichloro-benzyl)-lH-imidazol-2-ylmethyl]-(3-fluoro-benzyl)-amino]-ethyl}-piperazine-l- carboxylic acid tert-butyl ester (102 mg, 44%) as a colorless viscous oil: ESI MS m/z 576 [C29H36Cl2FN5O2 + H]+.

208167-83-3, The synthetic route of 208167-83-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; BOEHRINGER INGELHEIM PHARMA GMBH & CO. KG; WO2006/107923; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

304897-49-2, tert-Butyl 4-(4-aminobenzyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 1 is synthesized by reacting compound l-A with l-B using the conditions indicated above. Compound l-C is then reacted with compound l-D using the reaction conditions shown to afford the product l-E. The amine protecting group is then removed using suitable acidic conditions ( e.g ., TFA or HC1 in dioxane). Purification using standard techniques (e.g., silica gel chromatography or prep-HPLC) as needed., 304897-49-2

304897-49-2 tert-Butyl 4-(4-aminobenzyl)piperazine-1-carboxylate 12045001, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; TOLERO PHARMACEUTICALS, INC.; SIDDIQUI-JAIN, Adam; WARNER, Steven L.; FLYNN, Paul; BEARSS, David J.; FOULKS, Jason Marc; TOMIMATSU, Nozomi; FUJIMURA, Ken; UMEHARA, Hiroki; NONOYAMA, Akihito; KIGUCHIYA, Akihito; (441 pag.)WO2019/195753; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.38216-72-7,1-tert-Butylpiperazine,as a common compound, the synthetic route is as follows.

A. Synthesis of l-(4-(4-fert-butylpiperazin-l-yl)(phenyl)methyl)piperidin-l-yl)ethanone; [0092] 1-tert-butylpiperazine (4.48 g, 20.8 mmol), l-(4-(chloro(phenyl)methyl)piperidin-l-yl)ethanone (5.77 g, 22.9 mmol), K2CO3 (7.2 g, 52.1 mmol), and KI (22.9 mmol) were combined in dry DMF (150 mL). The reaction was refluxed overnight. Upon completion of the reaction, the DMF was removed under reduced pressure. The resulting crude was taken up in water (75 mL) and washed with EtOAc (3 x 100 mL). The organic portions were combined, dried (Na2SO4) and concentrated. The product was purified by silica gel chromatography (2.5:2.5:95 Et3N/MeOH/EtOAc, Rf 0.4) and isolated as a red oil (2.66 g, 36%).

38216-72-7, 38216-72-7 1-tert-Butylpiperazine 3530572, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; NEUROMED PHARMACEUTICALS LTD.; WO2008/31227; (2008); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics