Heterocyclic Building Blocks-piperazine

109-01-3, 1-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 100 mL 3-necked flask was equipped with a magnetic stirrer bar, nitrogen in- and outlet and septum. The setup was thoroughly dried using a heat gun and allowed to cool to room temperature under a nitrogen flow. Then, 4-nitrobenzoyl chloride (4.64 g, 25.0 mmol) was dissolved in dry dichloromethane (50 mL) and the solution was 10 minutes in an ice-water bath. N-methylpiperazine (2.58 g, 25.8 mmol, 1.03 eq) was added drop wise over a 10 minute time interval while stirring vigorously. The resulting suspension was stirred for 1 hour at 0 C., after which triethylamine (5.01 g, 50.0 mmol, 2.0 eq) was added and stirrring was continued at r.t. for 1 h. The reaction mixture was transferred into a separatory funnel and washed with demineralized water (3×50 mL). The organic layer was dried over Na2SO4, filtered over a paper filter and all volatiles were removed under reduced pressure using a rotary evaporator to give the desired product as a pale orange solid (5.77 g 23.1 mmol, 92%)., 109-01-3

The synthetic route of 109-01-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; TEIJIN ARAMID B.V.; VAN DEN HEUVEL, Christiaan J.M.; VELD, Martijn Arnoldus Johannes; QUAIJTAAL, Joannes H.M.; VERHOEF, Rene P.; DE JONG, Jorrit; NIJENHUIS, Wido; (12 pag.)US2018/223077; (2018); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.215309-01-6,3-(4-Methylpiperazin-1-yl)benzoic acid,as a common compound, the synthetic route is as follows.

General procedure: A solution of 2-(2-methyl-1H-indol-1-yl)ethanamine (4a) (65 mg, 0.373 mmol) and 4-(piperidin-1-yl)benzoic acid (5) (76 mg, 1 eq.), and dimethylaminopyridine (catalytic, ?5 mg) in dichloromethane (6 mL) was added 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide.hydrochloride (EDCI) (92 mg, 1.3 eq.) at room temperature. The resulting reaction mixture was stirred for 6h. At the conclusion of the reaction (TLC), water (15 mL) was added to quench the reaction. The product was extracted with ethyl acetate (20mL×3). Organics were washed with dilute HCl (10 mL), saturated NaHCO3 solution (10 mL), water (10 mL) and brine solution (10 mL) and dried over Na2SO4 and concentrated. The resulting crude product was subjected to silica gel chromatography eluting with 0-40% ethyl acetate in hexane to furnish 7k (TG7-152) (100mg, 74% yield). 1H NMR (CDCl3): delta 7.52 (d, J=5.6Hz, 1H), 7.49 (d, J=8.8Hz, 2H), 7.30 (d, J=8Hz, 1H), 7.07 (m, 2H), 6.80 (d, J=8.2Hz, 2H), 6.23 (s, 1H), 5.98 (t, J=5.4Hz, 1H), 4.33 (t, J=6Hz, 2H), 3.76 (q, J=6Hz, 2H), 3.25 (t, J=4.8Hz, 4H), 2.37 (s, 3H), 1.6 (m, 6H). LCMS (ESI): >97% purity at lambda 254, MS; m/z, 362 [M+H]+. Anal. Calcd. for C23H27N3O: C, 76.42; H, 7.53; N, 11.62; found; C, 76.48; H, 7.55; N, 11.59.

215309-01-6, As the paragraph descriping shows that 215309-01-6 is playing an increasingly important role.

Reference：
Article; Ganesh, Thota; Jiang, Jianxiong; Dingledine, Ray; European Journal of Medicinal Chemistry; vol. 82; (2014); p. 521 – 535;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

55121-99-8,55121-99-8, (4-Aminophenyl)(4-methylpiperazin-1-yl)methanone is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 257Preparation of 1-{4-[3-(1-methylethyl)-7-morpholin-4-yl-3H-[1,2,3]triazolo[4,5-d]pyrimidin-5-yl]phenyl}-3-{4-[(4-methylpiperazin-1-yl)carbonyl]phenyl}urea. To a stirred solution of triphosgene (35 mg, 0.12 mmol) in CH2Cl2 (4 mL) was added 4-(3-isopropyl-7-morpholino-3H-[1,2,3]triazolo[4,5-d]pyrimidin-5-yl)aniline (50 mg, 0.14 mmol) at 25 C. The reaction mixture was stirred for 15 min and NEt3 (20 muL, 0.14 mmol) was added. Stirring was continued for 1 h and (4-aminophenyl)(4-methylpiperazin-1-yl)methanone (103 mg, 0.43 mmol) and NEt3 (200 muL, 1.4 mmol) were added and the reaction mixture was stirred for additional 1 hr. The solvents were removed in a N2 stream and the crude mixture was purified by semi-prep-HPLC (NH3-method) to give 1-{4-[3-(1-methylethyl)-7-morpholin-4-yl-3H-[1,2,3]triazolo[4,5-d]pyrimidin-5-yl]phenyl}-3-{4-[(4-methylpiperazin-1-yl)carbonyl]phenyl}urea (43 mg, 39% yield), MS (ESI) m/z 585.4.

55121-99-8 (4-Aminophenyl)(4-methylpiperazin-1-yl)methanone 231408, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Wyeth; US2009/181963; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5521-38-0,2-(4-(4-Nitrophenyl)piperazin-1-yl)ethanol,as a common compound, the synthetic route is as follows.

REFERENCE EXAMPLE 19b 2-[4-(4-amino-phenyl)-piperazin-1-yl]-ethanol. 2-[4-(4-amino-phenyl)-piperazin-1-yl]-ethanol is prepared by catalytic hydrogenation of 2[4-(4-nitrophenyl)piperazine-1-yl]-ethanol (prepared as in Reference Example 19a) as described in Reference Example 13b, 5521-38-0

The synthetic route of 5521-38-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Chapdelaine, Marc; Davenport, Timothy; Haeberlein, Markus; Horchler, Carey; McCauley, John; Pierson, Edward; Sohn, Daniel; US2004/87575; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.373608-48-1,tert-Butyl 4-(3-aminopropyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A solution of intermediate compound E1 (1 .1 g), triethylamine (0.674 ml_) and 2-oxo-2H-chromen-4-yl trifluoromethanesulfonate (1 .2 g), prepared as described in step 5 of the preparation of compound 51 , in acetonitrile (20 ml_) was heated to 705C for 1 hour. The reaction mixture was concentrated under reduced pressure and the residue was partitioned between dichloromethane and a brine/sodium bicarbonate mixture (1 :1 ). The mixture was filtered through a hydrophobic frit (Phase Separator) washing with dichloromethane. The organic phase was evaporated under reduced pressure and the residue was chromatographed on silica gel (SNAP50) eluting with a gradient of EtOAc in cyclohexane to give 700 mg of tert-butyl 4-{3-[(2-oxo-2H-chromen- 4-yl)amino]propyl}piperazine-1 -carboxylate intermediate compound E2 (700 mg, Y=44%). LC-MS (M-H+) = 388.3, 373608-48-1

As the paragraph descriping shows that 373608-48-1 is playing an increasingly important role.

Reference：
Patent; AZIENDE CHIMICHE RIUNITE ANGELINI FRANCESCO A.C.R.A.F. S.P.A.; OMBRATO, Rosella; GAROFALO, Barbara; MANGANO, Giorgina; CAPEZZONE DE JOANNON, Alessandra; CORSO, Gaia; CAVARISCHIA, Claudia; FURLOTTI, Guido; IACOANGELI, Tommaso; (161 pag.)WO2016/96686; (2016); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

109-07-9, 2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 2,3-dichloropyrazine (2.80 g, 18.8 mmol), racemic 2- methylpiperazine (1.88 g, 18.8 mmol) and K2CO3 (3.90 g, 28.2 mmol) in acetonitrile (25 mL) was heated at 65 C for 15 h with stirring. The reaction mixture was filtered and concentrated. The crude product was purified by flash chromatography on silica gel using CHCl3/MeOH (15: 1) as eluent to give 3.2 g (79%) of the title compound. MS m/z 213 (M+H) +., 109-07-9

As the paragraph descriping shows that 109-07-9 is playing an increasingly important role.

Reference：
Patent; BIOVITRUM AB; WO2004/9586; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3022-15-9,Piperazine-2-carboxylic acid dihydrochloride,as a common compound, the synthetic route is as follows.

a) 1,4-Bis(tert-butoxycarbonyl)-2-piperazinecarboxylic acid To a solution of piperazine-2-carboxylic acid dihydrochloride (5 g, 24.6 mmol) in 2M sodium hydroxide (40 mL) and ethanol (40 mL) was added di-tert-butyl dicarbonate (11.82 g, 54.1 mmol) and the reaction mixture stirred for 3 days. The organic solvent was removed in vacuo, the aqueous phase basified with 2M sodium hydroxide and extracted with diethyl ether to remove excess di-tert-butyl dicarbonate. The aqueous layer was adjusted to pH 3-4 and extracted with ethyl acetate. The combined organic extracts were dried (MgSO4), filtered and evaporated to yield 1,4-bis(tert-butoxycarbonyl)-2-piperazinecarboxylic acid as a white solid., 3022-15-9

As the paragraph descriping shows that 3022-15-9 is playing an increasingly important role.

Reference：
Patent; Agejas-Chicharro, Javier; Belen Bueno Melendo, Ana; Camp, Nicholas Paul; Gilmore, Jeremy; Jimenez-Aguado, Alma Maria; Lamas-Peteira, Carlos; Marcos-Llorente, Alicia; Mazanetz, Michael Philip; Montero Salgado, Carlos; Timms, Graham Henry; Williams, Andrew Caerwyn; US2004/122001; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13484-40-7,1-(2-Methoxyethyl)piperazine,as a common compound, the synthetic route is as follows.

Synthesis of N-[3-(4-{[4-(2-methoxyethyl)piperazinyI]methyl}phenyl)-4- oxoindeno[2,3-d]pyrazol-5-yl](morpholin-4-ylamino)carboxamide dihydrochloride (compound B16):Acetic acid (5.76 g, 96 mmole) was added to a suspension of aldehyde (10 g, 24 mmole) and piperazine (6.91 g, 48 mmole) in NMP (150 mL). The reaction was stirred at room temp for 16h then treated with NaB(OAc)3H (12.7 g, 60 mmole). The reaction was stirred at room temp for 2Oh during which time the reaction becomes very viscous. IN NaOH (200 mL) was then added and the reaction was stirred for Ih. The reaction was then poured onto H2O (750 mL) and filtered. The solid was washed with H2O (2 x 350 mL), EtOH (100 mL), and Et2O (200 mL). The solid was then dried under vacuum to yield the desired amine as the free base (9.98 g, 76%). The free base was then suspended in EtOH (200 mL) and heated to boiling. The suspension was then treated with 4N HCl in dioxane (15 mL). The suspension clears then after ~15 min, a thick precipitate forms. Additional EtOH (200 mL) was added to facilitate stirring. Once the suspension cooled to room temp, it was filtered and the solid was washed with EtOH (200 mL) and Et2O (200 mL). The solid was then dried under vacuum to yield the desired bis-hydrochloride salt (10.3 g) designated compound B 16.

13484-40-7, 13484-40-7 1-(2-Methoxyethyl)piperazine 2734638, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; GPC BIOTECH, INC.; WO2006/2119; (2006); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

59878-57-8, 1-(Cyclopropylcarbonyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59878-57-8, To a stirred suspension of 4-(bromomethyl)pyridin-2-amine hydrobromide (10.0 g, 37.3 mmol)in acetonitrile (75 mL) was added potassium carbonate (16.0 g, 116 mmol) andcyc?opropyl(piperazin-1-yl)methanone (6.10 g, 39.6 mmol) (CAS-RN 59878-57-8) The mixture was stirred at 75 C for 2 h. Direct silicagel chro matography of the reaction mixture gave a solid which was triturated with ether to give 7.20 g (74 % yield) of the title compound. LC-MS (Method 5): Rt = 0.14 mm; MS (ESIpos): m/z = 261 [M+H]1H-NMR (400 MHz, DMSO-d6) [ppm]: 0.655 (0.49), 0.667 (1.47), 0.674 (3.50), 0.680 (2.08),0.687 (1.70), 0.694 (4.26), 0.699 (3.30), 0.705 (3.66), 0.712 (3.58), 0.717 (4.34), 0.724 (1.98),0.737 (0.54), 1.905 (0.42), 1.917 (0.87), 1.924 (0.93), 1.928 (0.69), 1.936 (1.55), 1.942 (0.73),1.948 (0.90), 1.956 (0.83), 2.304 (1.43), 2.376 (1.45), 2.490 (0.57), 2.495 (1.18), 2.500 (1.61),2.504 (1.18), 2.509 (0.57), 3.332 (16.00), 3.355 (0.68), 3.462 (1.29), 3.599 (0.53), 3.615 (0.43),3.661 (1.28), 5.805 (4.16), 6.408 (3.74), 6.428 (2.21), 6.431 (1.88), 6.441 (2.19), 6.444 (1.89),7.815 (2.34), 7.828 (2.29).

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

Reference：
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; SCHULZE, Volker; HEINRICH, Tobias; PRINZ, Florian; LEFRANC, Julien; SCHROeDER, Jens; MENGEL, Anne; BONE, Wilhelm; BALINT, Joszef; WENGNER, Antje; EIS, Knut; IRLBACHER, Horst; KOPPITZ, Marcus; BOeMER, Ulf; BADER, Benjamin; BRIEM, Hans; LIENAU, Philip; CHRIST, Clara; STOeCKIGT, Detlef; HILLIG, Roman; (1256 pag.)WO2017/102091; (2017); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.115761-79-0,1-(2,4-Difluorophenyl)piperazine,as a common compound, the synthetic route is as follows.

To a solution of the product from the previous step (150 mg, 0.41 mmol) in CH2CI2 (5 mL) was added in portions Et3N (126 mg, 1.25 mmol), followed by the addition in portions of l-(2,4-difluorophenyl)piperazine (82 mg, 0.41 mmol, 1.00 equiv). The resulting solution was stirred for 16 h at rt, then quenched by the addition of 15 mL H20 and extracted with 2×30 mL of EtOAc. The combined organic layers were concentrated under vacuum to afford 170 mg (92%) of the title compound as an off-white solid. LC-MS: (ES, m/z) 448

115761-79-0, 115761-79-0 1-(2,4-Difluorophenyl)piperazine 2734637, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; CENTAURUS THERAPEUTICS; ROMERO, Donna, L.; BLITZER, Jeremy; (242 pag.)WO2019/140188; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics