Heterocyclic Building Blocks-piperazine

611225-86-6, 4-(4-Ethylpiperazin-1-ylmethyl)phenylamine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

611225-86-6, 104 mg (0.35 mMol) triphosgene are ^j-n’ ^ dissolved in13 ml ice-cooled CH2CI2. ^-/ ~~” Then a solution of 230 mg (1.05mMol) 4-(4-ethylpiperazin-1-O Hylmethyl)~aniline and 209 i (1.50 mMol) Et3N in 6 ml CH2CI2 is added during 8 min. After 3 additional minutes, the mixture is warmed up to rt by a water bath and then a solution of 1.0 mMol 5-(6-chloro-pyrimidin-4-yioxy)-2,3-dihydro-1H-indole (Step 14.1) and 139 jll. (1.00 mMol) Et3N in 6 ml CH2CI2 is added during 8 min. After 2 h at rt, the mixture is diluted with sat. Na2C03 solution / water 1:1 and EtOAc, the aqueous phase separated off and extracted twice with EtOAc. The organic layers are washed with water and brine, dried (Na2S04) and concentrated. Crystallization from DIPE gives the title compound: MS: [M+1]+= 493 / 495; TLC(CH2CI2/MeOH/NH3conc- 90:10:1): Rf = 0.24; HPLC: et_ = 10.5.

The synthetic route of 611225-86-6 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2006/34833; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.115619-01-7,4-(4-Ethylpiperazin-1-yl)phenylamine,as a common compound, the synthetic route is as follows.

General procedure: A solution of compound 4 or 5 (1 mmol) and the appropriate aniline (1 mmol) in n-butanol (5 mL) was stirred at 100 C for 5 h. The reaction mixture was then cooled to room temperature, evaporated under reduced pressure, and the residue was purified either by flash column chromatography or precipitation., 115619-01-7

As the paragraph descriping shows that 115619-01-7 is playing an increasingly important role.

Reference：
Article; Elkamhawy, Ahmed; Al-Sanea, Mohammad M.; Song, Chiman; Sim, Taebo; Roh, Eun Joo; Bulletin of the Korean Chemical Society; vol. 36; 7; (2015); p. 1863 – 1873;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.262368-30-9,N-(4-Aminophenyl)-N-methyl-2-(4-methylpiperazin-1-yl)acetamide,as a common compound, the synthetic route is as follows.

Step-2: To a solution of (E)-methyl 1-acetyl-3-(ethoxy(phenyl)methylene)-2-oxo-2,3-dihydro-1H-pyrrolo[2,3-b]pyridine-6-carboxylate (2.6 g, 7.10 mmol) in DMF (5 mL) was added N-(4-aminophenyl)-N-methyl-2-(4-methylpiperazin-1-yl)acetamide (1.94 g, 7.43 mmol) at RT and the reaction mixture was heated to 110 C. and stirred for 1 h. The reaction mixture was allowed to cool to RT, treated with piperidine (3 mL) and stirred for 30 min. The reaction mixture was evaporated and the resultant residue was purified by silica gel column chromatography using 5% CH3OH in dichloromethane as eluent to afford (Z)-methyl 3-(((4-(N-methyl-2-(4-methylpiperazin-1-yl)acetamido)phenyl)amino)(phenyl)methylene)-2-oxo-2,3-dihydro-1H-pyrrolo[2,3-b]pyridine-6-carboxylate as yellow solid. MS (ES+): m/z 541.1 (MH+).

262368-30-9, As the paragraph descriping shows that 262368-30-9 is playing an increasingly important role.

Reference：
Patent; ANGION BIOMEDICA CORP.; PANICKER, Bijoy; MISHRA, Rama K.; LIM, Dong Sung; OEHLEN, Lambertus J.W.M.; JUNG, Dawoon; US2015/306078; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

115761-79-0, 1-(2,4-Difluorophenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Additional amide analogs were prepared by adding 1.5 equivalents of an amine which will provide the desired substituents into a 1 dram vial (1.5 eq.) along with lithium 5-amino-7- methoxyimidazo[1,2-c]quinazoline-2-carboxylate (30 mg, 0.114 mmol) and a DMF solution (1.0 ml) solution of DIPEA (0.079 ml, 0.454 mmol), shaking the vial for 5 minutes in a Bohdan Miniblock Shaker and then adding 1-propanephosphonic acid cyclic anhydride (50% w/w in EtOAc, 64.7 mul, 0.109 mmol), and continuing to shake the vial at RT overnight. The completed reaction was quenched with 1.0 ml water and the organic layer separated by filtering through a Varian 2 ml Reservior Frit and a Whatman 0.45mum syringe filter to remove emulsion, followed by solvent removal using a Genevac. The crude residue was dissolved in 1.0 ml DMSO and purified by LC/MS.

115761-79-0, The synthetic route of 115761-79-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP & DOHME CORP.; ALI, Amjad; LIM, Yeon-Hee; GALLO-ETIENNE, Gioconda, V.; KELLY, Joseph, Michael; BERLIN, Michael; TING, Pauline; TAGAT, Jayaram, R.; XIAO, Dong; KUANG, Rongze; WU, Heping; WANG, Hongwu; (157 pag.)WO2019/118313; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5317-33-9,3-(4-Methylpiperazin-1-yl)propan-1-ol,as a common compound, the synthetic route is as follows.

General procedure: To a solution of triphenylphosphine (0.37 mmol) in THF (30 mL) was slowly added diisopropyl azodicarboxylate (0.37 mmol) in 15 min at 0 C and the mixture was stirred for another 15 min. At the same temperature, to the resulting mixture was slowly added a solution of 20 (0.185 mmol) and corresponding alcohol (0.37 mmol) dissolved in 20 mL THF. The ice bar was removed and the reaction mixture was stirred at room temperature for 12 h. The reaction mixture was evaporated in vacuo, and the residue was purified by column chromatography to afford the product., 5317-33-9

5317-33-9 3-(4-Methylpiperazin-1-yl)propan-1-ol 79208, apiperazines compound, is more and more widely used in various fields.

Reference：
Article; Xing, Weiqiang; Ai, Jing; Jin, Shiyu; Shi, Zhangxing; Peng, Xia; Wang, Lang; Ji, Yinchun; Lu, Dong; Liu, Yang; Geng, Meiyu; Hu, Youhong; European Journal of Medicinal Chemistry; vol. 95; (2015); p. 302 – 312;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5625-67-2,Piperazin-2-one,as a common compound, the synthetic route is as follows.

5625-67-2, Di-tert-butyl dicarbonate (3.92 g, 17.98 mmol) was added to a suspension of 2-piperazinone (1.50 g, 14.98 mmol) in dichloromethane (15 mL). The mixture was stirred at room temperature for 5 hours. The solvent was evaporated to afford 1 ,1- dimethylethyl 3-oxo-1-piperazinecarboxylate (2.99 g, quantitative) as an off-white solid.

As the paragraph descriping shows that 5625-67-2 is playing an increasingly important role.

Reference：
Patent; GLAXOSMITHKLINE LLC; BANKA, Anna; CATALANO, John, G.; CHONG, Pek, Yoke; FANG, Jing; GARRIDO, Dulce, Maria; PEAT, Andrew, James; PRICE, Daniel, J.; SHOTWELL, John, Brad; TAI, Vincent; ZHANG, Huichang; WO2011/41713; (2011); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.630125-91-6,4-((4-Ethylpiperazin-1-yl)methyl)-3-(trifluoromethyl)aniline,as a common compound, the synthetic route is as follows.

630125-91-6, Example 69 Preparation of ethyl6-(3-(3-(4-((4-ethylpiperazin-1-yl)methyl)-3-(trifluoromethyl)phenyl)ureido)phenyl)-1H-indazole-3-carboxylate To a stirred solution of 4-((4-ethylpiperazin-1-yl)methyl)-3-(trifluoromethyl)benzeneamine (30.6 mg) in 1,4-dioxane (1 Ml), was added 4-nitrophenylchloroformate (21.6 mg) at room temperature. After 60 C. at 1 h, them mixture was cooled to rt and ethyl 6-(3-aminophenyl)-1H-indazole-3-carboxylate (30 mg) was added. The mixture was stirred at 90 C. for 12 h. Ethyl acetate and water were added and the aqueous layer was extracted with ethyl acetate three times. The combined organic layer was dried over magnesium sulfate and concentrated under reduced pressure. The residue was triturated in ethyl acetate/hexane to give 6-(3-(3-(4-((4-ethylpiperazin-1-yl)methyl)-3-(trifluoromethyl)phenyl)ureido)phenyl)-1H-indazole-3-carboxylate (16.2 mg). 1H NMR (400 MHz, DMSO-d6) delta13.98 (s, 1H), 9.09 (s, 1H), 8.93 (s, 1H), 8.15 (8.4 Hz, 1H), 7.99 (s, 1H), 7.93 (s, 1H), 7.81 (s, 1H), 7.62 (m, 3H), 7.43 (br d, J=4.4 Hz, 2H), 7.28 (m, 1H), 4.41 (q, J=7.2 Hz, 2H), 3.54 (s, 2H), 2.49 (m, 10H), 1.39 (t, J=7.2 Hz, 3H).

The synthetic route of 630125-91-6 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Sim, Tae Bo; Son, Jung Beom; Kim, Hwan; Park, Dong Sik; Choi, Hwan Geun; Ham, Young Jin; Hah, Jung Mi; Yoo, Kyung Ho; Oh, Chang Hyun; Lee, So Ha; Ha, Jae Du; Cho, Sung Yun; Kwon, Byoung Mog; Han, Dong Cho; US2012/130069; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

2762-32-5, Piperazine-2-carboxylic acid is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

54a. 4-((Benzyloxy)carbonyl)-1 -(tert-butoxycarbonyl)piperazine-2- carboxylic acidThe tile compound was prepared according to the procedure of [Kempf, D. J.; Norbeck, D. W.; Sham, H. L U.S. Patent 5,455,351 , Oct 3, 1995]. Piperazine-2-carboxylic acid (10.0 g, 77.0 mmol) was dissolved in a 1 :1 solution of 1 ,4-dioxane:water (100 mL) at room temperature with vigorous stirring. The clear solution was adjusted to pH 11 by the addition of an aqueous solution of sodium hydroxide (80 mL of a 1Lambda/ solution). The pH was monitored in situ with a pH meter throughout the reaction. The reaction flask was fitted with an addition funnel that contained a solution of Lambda/-alpha- (benzyloxycarbonyloxy) succinamide (13.6 g, 55 mmol) in 1 ,4-dioxane (50 mL). The Lambda/-alpha-(benzyloxycarbonyloxy) succinamide solution was added over 45 minutes at room temperature and the pH was kept above 10 by the periodic addition of 1 Lambda/ sodium hydroxide. The pH of the solution was adjusted to 9.5 and 2-(teAf-butoxycarbonyloxyimino)-2-phenylacetonitrile (13.4 g, 55 mmol) was added as a solution in 1 ,4-dioxane (50 mL) over 10 minutes. The pH was maintained at 9.5 and the solution was stirred at room temperature for 17 hours. The solution was then acidified to pH 2 and the aqueous solution was washed with diethyl ether (3 x 150 mL). The aqueous solution was cooled to O0C and acidified by adding of concentrated hydrochloric acid. The acidic solution was extracted with ethyl acetate (5 x 150 mL). The combined organic phases were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was triturated with a 1 :1 solution of dichloromethane: hexanes (150 mL) and the solvent was removed in vacuo to provide the product as a viscous yellow oil (15.7 g, 43 mmol, 80%). Rf = 0.60 (66:34 dichloromethane: ethyl acetate + 0.1% (v/v acetic acid); 1H-NMR (400 MHz, DMSO) delta 13.0 (br s, 1 H), 7.37-7.36 (m, 5H), 5.05 (s, 2H), 4.54-4.33 (m, 2H), 3.90-3.66 (m, 2H), 3.07-2.81 (m, 4H), 1.38 (s, 9H); Mass spectrum (ESI +ve) m/z 365.1 (MH+).

2762-32-5, The synthetic route of 2762-32-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; BIKAM PHARMACEUTICALS, INC.; GARVEY, David, S.; LAROSA, Gregory, J.; GREENWOOD, Jeremy, Robert; BREWER, Mark, L.; QUACH, Tan; COTE, Jamie, B.; BERMAN, Judd; WO2010/147653; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

109-07-9, 2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Example 10 Benzyl 3-methylpiperazine-1-carboxylate A 4 g portion of 2-methylpiperazine was dissolved in 40 ml of dichloromethane, and 1.71 g of benzyl chloroformate was added dropwise thereto at -78C. After 1 hour of stirring, the mixture was washed by adding water and dried and then the solvent was evaporated to obtain 2.0 g of the title compound., 109-07-9

109-07-9 2-Methylpiperazine 66057, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; YAMANOUCHI PHARMACEUTICAL CO. LTD.; EP1122242; (2001); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1001180-21-7,(R)-tert-Butyl 4-(5-methyl-7-oxo-6,7-dihydro-5H-cyclopenta[d]pyrimidin-4-yl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A flask was equipped with a thermocouple, mechanic stirrer, a nitrogen inlet and drying tube. To the flask was added (R)-tert-buty 4-(5-methyl-7-oxo-6,7-dihydro-5H- cyclopenta[i ]pyrimidin-4-yl)piperazine-l -carboxylate (46.0 g, 139 mmol) followed by dichloromethane (1.10 L) and RuCl(TsDACH) catalyst (1.50 g, 2.80 mmol) with nitrogen degassing (gas dispersion tube) and agitation at room temperature. To the mixture was added triethylamine (23.0 mL, 167 mmol) with degassing. Formic acid (7.40 mL, 195 mmol) was slowly added to the mixture at a rate of about 1 mL/min. Good agitation with stirring was maintained until complete consumption of starting material (about 8-12 hr) as determined by HPLC analysis. The reaction was quenched with saturated sodium bicarbonate (2.00 vol., 100 mL), the layers were separated and the aqueous layer was discarded. The organic layer was washed with saturated sodium bicarbonate, saturated ammonium chloride and brine (2.00 vol., 100 mL each). The organics were dried over sodium sulfate, filtered and solvent exchanged into methanol. The methanolic solution (5.00 vol.) of crude product was charged with 50 wt % SiliaBond Thiol (Silicycle, Inc.) and 20 wt% Charcoal. The mixture was heated to about 50 C and maintained at that temperature with good stirring overnight. The mixture was cooled to room temperature, filtered over a pad of Celite and then polish filtered through a 0.45 micron filter. The mixture was distilled to a minimum working volume and concentrated under reduced pressure to afford the product (44.0 g, 95 % yield), as a 96:4 mixture of trans/cis diastereomers) as solid. Trace amount of Ru metal was measured by ICP-EOS and found that the product contained less than about 20 ppm Ru. The product was purified by preparative HPLC under the following conditionsor crystallization from ethyl acetate/heptane to yield 98.4 % pure product, 97.7 % de with about 100% ee., 1001180-21-7

The synthetic route of 1001180-21-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; LANE, Jonathan W.; REMARCHUK, Travis; SHAKYA, Sagar; SPENCER, Keith L.; STENGEL, Peter J.; WO2013/173736; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics