Some tips on 129799-08-2

129799-08-2 1-tert-Butyl 3-methyl piperazine-1,3-dicarboxylate 2756819, apiperazines compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.129799-08-2,1-tert-Butyl 3-methyl piperazine-1,3-dicarboxylate,as a common compound, the synthetic route is as follows.,129799-08-2

Step 4: tert-butyi l,3-dioxo-2-[tralpha/?5-2-phenylcyclopropyllhexahydroimidazo[l,5-alphalpyrazine- 7(lH)-carboxylate (A4); To A3 in toluene (0.4M) was added dropwise trans-2-phenylcyclopropyl isocyanate (1.05 eq.). The mixture was stirred O/N at rt. DIPEA (1.5 eq.) was added and the mixture refluxed for 20 h. The organic phase was washed with phosphate buffer (2 x 200 mL, 0.75 M NaH2PO4, pH ~ 4.5) and the solvent removed under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with 20-100% EtO Ac/petroleum ether to give the title compound in 60 % yield. MS (ES+) C20H25N3O4 requires 371, found: 394 (M+Na)+.

129799-08-2 1-tert-Butyl 3-methyl piperazine-1,3-dicarboxylate 2756819, apiperazines compound, is more and more widely used in various.

Reference£º
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P. ANGELETTI S.P.A.; BRANCA, Danila; FERRIGNO, Federica; HERNANDO, Jose, Ignacio, Martin; JONES, Philip; KINZEL, Olaf; MALANCONA, Savina; MURAGLIA, Ester; PALUMBI, Maria, Cecilia; PESCATORE, Giovanna; SCARPELLI, Rita; WO2010/23480; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Simple exploration of 115761-79-0

115761-79-0 1-(2,4-Difluorophenyl)piperazine 2734637, apiperazines compound, is more and more widely used in various.

115761-79-0, 1-(2,4-Difluorophenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A 5.0 mL round-bottomed flask was equipped with a reflux condenser, 2.5 mol % chloro(1,5-cyclooctadiene)iridium (I) dimer [Ir(COD)Cl]2 and 5.0 mol % (S)-p-Tol-BINAP were added and followed by addition of anhydrous tetrahydrofuran (2.0 mL). After they were stirred for 10 min to produce a yellow solution. 1,4-Dihydro-1,4-epoxynaphthalene 1a (50 mg, 0.3468 mmol) was added; then 10 min later, additive of ammonium iodide (1.0 equiv. to 1a) was added and heated to reflux. At the first sign of reflux, N-substituted piperazine nucleophiles (2.0 equiv. to 1a) were added. The reaction mixture was stirred at reflux and monitored by TLC until completion (typically 6-12 h). The solvent was removed in vacuo and the crude mixture was purified by column chromatography on silica gel to afford the desired products., 115761-79-0

115761-79-0 1-(2,4-Difluorophenyl)piperazine 2734637, apiperazines compound, is more and more widely used in various.

Reference£º
Article; Yang, Wen; Luo, Renshi; Yang, Dingqiao; Molecules; vol. 20; 12; (2015); p. 21103 – 21124;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 109-07-9

109-07-9 2-Methylpiperazine 66057, apiperazines compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.109-07-9,2-Methylpiperazine,as a common compound, the synthetic route is as follows.

Method 1 1-(t-Butoxycarbonyl)-3-methylpiperazine To a cold (-5¡ã C.) solution of 2-methylpiperazine (5.00 g, 0.05 mole) in 200 mL of CH2 Cl2 under Ar was added a solution of di-t-butyl dicarbonate (10.9 g, 0.05 mole) in 100 mL of CH2 Cl2 over 1 h. The resulting mixture was stirred at -5¡ã C. for 1 h and then at r.t. for 2 h. The solution was then washed (H2 O), dried (Na2 SO4) and evaporated to give an oil which was chromatographed (SiO2 /ethyl acetate then ethyl acetate-MeOH-NH4 OH 10:1:0.1) to give the product (4.30 g, 43percent) as an oil. This material was used without further purification: 1 H nmr (200 MHz, CDCl3) delta4.15-3.75 (br s, 2H), 3.0-2.6 (m, 4H), 2.47-2.35 (m, 1H), 1.48 (s, 9H), 1.08 (d, J=6.7 Hz, 3H)., 109-07-9

109-07-9 2-Methylpiperazine 66057, apiperazines compound, is more and more widely used in various.

Reference£º
Patent; Bristol-Myers Squibb Company; US5300506; (1994); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A resealable tube was charged with 4-chloro-2-[4-(2-morpholin-4-yl-ethoxy)-phenyl]-3-phenyl-furo[2,3-b]pyridine 6c (0.048 g, 0.110 mmol), 4-N-(tert-butoxycarbonyl)-1-aminoethylpiperazine 9a (0.051 g, 0.221 mmol), and potassium carbonate (0.304 g, 2.20 mmol). The Pd/BINAP solution was added along with 1.5 mL of toluene, and the system was flushed with argon. The tube was sealed and the mixture stirred at 130¡ã C. for 2 h. The reaction mixture was partitioned between ethyl acetate and saturated aqueous sodium bicarbonate solution. The aqueous phase was separated and extracted with ethyl acetate. The combined organic phases were washed with saturated aqueous sodium chloride solution, dried over anhydrous sodium sulfate, filtered and concentrated to afford an orange brown oil. This oil was purified via preparative thin layer chromatography (eluting twice with 95:5:0.5, dichloromethane/methanol/ammonium hydroxide) to afford 4-(2-{2-[4-(2-morpholin-4-yl-ethoxy)-phenyl]-3-phenyl-furo[2,3-b]pyridin-4-ylamino}-ethyl)-piperazine-1-carboxylic acid tert-butyl ester 10d as an off white solid. MS (MH+) 628.1; Calculated 627 for C36H45NO5., 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference£º
Patent; Nunes, Joseph J.; Martin, Matthew W.; White, Ryan; McGowan, David; Bemis, Jean E.; Kayser, Frank; Fu, Jiasheng; Liu, Jinqian; Jiao, Xian Yun; US2006/46977; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

New learning discoveries about 109-01-3

109-01-3 1-Methylpiperazine 53167, apiperazines compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.109-01-3,1-Methylpiperazine,as a common compound, the synthetic route is as follows.

nitrobenzyl bromide and N- methyl piperazine after the substitutionreaction, and then get by stannous chloride reduction., 109-01-3

109-01-3 1-Methylpiperazine 53167, apiperazines compound, is more and more widely used in various.

Reference£º
Patent; CHINA PHARMACEUTICAL UNIVERSITY; YANG, ZHAO; WANG, ZHIXIANG; FANG, ZHENG; GUO, KAI; WEI, PING; (23 pag.)CN103739550; (2016); B;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 3022-15-9

3022-15-9, As the paragraph descriping shows that 3022-15-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3022-15-9,Piperazine-2-carboxylic acid dihydrochloride,as a common compound, the synthetic route is as follows.

Piperazine-2-carboxyilc acid dihydrochloride (15.0 g, 73.9 mmol) was dissolved in H2O (240 mL) and 1,4-dioxane (360 mL), and the solution was brought to pH 10 with 6 N NaOH in H2O. Di-tert-butyldicarbonate (28.3 g, 162 mmol) was added while maintaining the pH at 10 with 6 N NaOH in H2O. After 2 h, the reaction mixture was extracted with Et2O (3 x 200 mL). The aqueous layer was brought to pH 3 with 6 N HCl and was extracted with EtOAc (4 x 300 mL). The combined EtOAc extracts were dried over Na2SO4, filtered, and concentrated under reduced pressure to give 14.45 g (59%) of the desired product as an off- white solid. The material was used without further purification. LC-MS: RT = 8.16 min; [M+Na]+ = 353.1.

3022-15-9, As the paragraph descriping shows that 3022-15-9 is playing an increasingly important role.

Reference£º
Patent; CRITICAL THERAPEUTICS, INC.; WO2007/146066; (2007); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 5747-48-8

As the paragraph descriping shows that 5747-48-8 is playing an increasingly important role.

5747-48-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5747-48-8,11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine,as a common compound, the synthetic route is as follows.

A mixture of PDBTZ (1 mmol), acetaldehyde (1 mmol), and a catalytic amount of p- toluenesulfonic acid in dry benzene is refluxed for two hours using a Dean-Stark trap to separate water. The reaction mixture is evaporated and the residue purified by flash chromatography to provide the title compound.

As the paragraph descriping shows that 5747-48-8 is playing an increasingly important role.

Reference£º
Patent; ASTRAZENECA AB; WO2008/79847; (2008); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 30459-17-7

30459-17-7, The synthetic route of 30459-17-7 has been constantly updated, and we look forward to future research findings.

30459-17-7, 1-(4-Trifluoromethylphenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 0.332/0.36885 g (0.001 mol) of 1-(6-bromohexyl)-1,8-naphthosultam(3a)/lactam (3b), 0.00095 mol of the corresponding arylpiperazine(4), 0.414/0.120 g (0.003 mol) K2CO3/NaOH and 0.032 g(0.0001 mol) of TBAB were triturated in a mortar. The triturated mixturewas transferred to a round bottom flask. In the case of the reactionin the presence of the solvent, 0.2 cm3 of acetonitrile, DMF or water wasadded to the reaction mixture. The reactions were carried out for 50 s ina CEM Discover microwave reactor at a 100W output power. Theprogress of the reaction was monitored by TLC (CHCl3:MeOH 9:1).After completion of the reaction, 40 cm3 of water was added to themixture and placed in the refrigerator overnight. After cooling, thecrude product was filtered off. In the absence of the required purity, thecrude product was crystallized from methanol or methanol-water. Afterobtaining a minimum of 90% purity, the ligands were dissolved inacetone, then converted to 4M HCl hydrochloride in dioxane. The reactionyields for individual ligands were calculated based on the weightof the obtained pure hydrochloride.

30459-17-7, The synthetic route of 30459-17-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zar?ba, Przemys?aw; Ja?kowska, Jolanta; Czekaj, Izabela; Sata?a, Grzegorz; Bioorganic and Medicinal Chemistry; vol. 27; 15; (2019); p. 3396 – 3407;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Simple exploration of 55112-42-0

55112-42-0 4-Methyl-1-piperazinecarbonyl Chloride Hydrochloride 3016934, apiperazines compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.55112-42-0,4-Methyl-1-piperazinecarbonyl Chloride Hydrochloride,as a common compound, the synthetic route is as follows.

To a suspension OF 4-METHYLPIPERAZINE-1-CARBONYL chloride hydrochloride (19.9 g 0.1 mol) and piperidone monohydrate hydrochloride (15.3 g 0.1 mol), in 200 ML of dichloromethane, dry triethylamine (45 mL, 0.33 mol) was added dropwise. The mixture was stirred for 2 hours. The organic phase was washed with brine (2 x 20 mL) and dried over sodium sulfate. After filtration, the solvent was evaporated in vacuo and the crude product was dissolved in ETOH (50 mL) and diethylether (100 mL) and treated with HCl 4N in dioxane (25 mL). After 1 hour, the precipitate was filtered and dried in oven to give 13 g (yield 50%) of the title compound. 1 H NMR (400 MHz, DMSO-D6) 8 ppm 2.40 (t, J=6. 16 Hz, 4 H) 2.81 (s, 3 H) 3.00- 3.11 (m, 2 H) 3.12-3. 23 (m, 2 H) 3.28-3. 42 (m, 2 H) 3.51 (t, J=6. 16 Hz, 4 H) 3.73 (d, J=14. 27 Hz, 2 H) 10.12 (s, 1 H), 55112-42-0

55112-42-0 4-Methyl-1-piperazinecarbonyl Chloride Hydrochloride 3016934, apiperazines compound, is more and more widely used in various.

Reference£º
Patent; PHARMACIA ITALIA S.P.A.; WO2004/104007; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 30459-17-7

30459-17-7 1-(4-Trifluoromethylphenyl)piperazine 121718, apiperazines compound, is more and more widely used in various.

30459-17-7, 1-(4-Trifluoromethylphenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To the chloro compounds (1.00 mmol) in toluene, were added piperazines 8a-j (1.0 mmol) at room temperature. The reaction mixture was heated at 110 oC for overnight. After completion (TLC), the reaction mixture was extracted with ethyl acetate and water. The organic layer was separated and dried over anhydrous Na2SO4, evaporated to dryness. The residue was purified with column chromatography using an eluent of 25% ethyl acetate in hexane to furnish the compounds with moderate to good yields (64-82%)., 30459-17-7

30459-17-7 1-(4-Trifluoromethylphenyl)piperazine 121718, apiperazines compound, is more and more widely used in various.

Reference£º
Article; Banu, Saleha; Bollu, Rajitha; Naseema, Mohammad; Gomedhika, P. Mary; Nagarapu, Lingaiah; Sirisha; Kumar, C. Ganesh; Gundasw, Shravan Kumar; Bioorganic and Medicinal Chemistry Letters; vol. 28; 7; (2018); p. 1166 – 1170;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics