Category: piperazines

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.129799-08-2,1-tert-Butyl 3-methyl piperazine-1,3-dicarboxylate,as a common compound, the synthetic route is as follows.

Example 1A 1-tert-butyl 3-methyl 4-(2-cyano-4-nitrophenyl)piperazine-1,3-dicarboxylate To a solution of 1-tert-butyl 3-methyl piperazine-1,3-dicarboxylate (80 g, 328 mmol) and N,N-diisopropylethylamine (192 mL, 741 mmol) in 300 mL of dry tetrahydrofuran was added 2-fluoro-5-nitrobenzonitrile (36 g, 219 mmol) at room temperature. The reaction mixture was heated to reflux for 36 hours. The reaction was concentrated and the resulting residue was purified by silica gel chromatography (30% ethyl acetate in hexane) to give the title compound: 1H NMR (300 MHz, DMSO-d6) delta ppm 1.41 (s, 9H), 3.01-3.15 (m, 1H), 3.29-3.36 (m, 1H), 3.34-3.36 (m, 1H), 3.48-3.55 (m, 1H), 3.66 (s, 3H), 3.72-3.76 (m, 1H), 4.43-7.48 (m, 1H), 4.96-4.98 (m, 1H), 7.30 (d, J=9.1 Hz, 1H), 8.32 (dd, J=9.5, 2.8 Hz, 1H), 8.55 (d, J=2.8 Hz, 1H); MS (DCI/NH3) m/z 391 (M+H)+.

129799-08-2, The synthetic route of 129799-08-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ABBOTT LABORATORIES; US2011/288069; (2011); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substituted piperazines (0.9819mmol) in dry DMF (4mL), triethylamine (0.27mL, 1.9638mmol) and potassium iodide (16.29mg, 0.0981mmol) were added at RT under N2 atmosphere. Compound 2 (0.4g, 0.9819mmol) was added to the above reaction mixture and resultant mixture was heated at 125C. After the reaction was complete, as indicated by TLC, DMF was evaporated in vacuo. The obtained residue was diluted with 20mL of water. The compound was extracted with CH2Cl2 (3¡Á5mL). The organic layers were collected, washed with saturated brine solution, dried over anhydrous MgSO4 and concentrated in vacuo. The resultant crude was purified by column chromatography [CH2Cl2/MeOH (1-10%)] to get the title compounds.

5308-25-8, As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference£º
Article; Suresh, Narva; Nagesh, Hunsur Nagendra; Renuka, Janupally; Rajput, Vikrant; Sharma, Rashmi; Khan, Inshad Ali; Kondapalli Venkata Gowri, Chandra Sekhar; European Journal of Medicinal Chemistry; vol. 71; (2014); p. 324 – 332;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

154590-34-8, tert-Butyl 4-(2-fluoro-4-nitrophenyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3-4-2 Preparation of [3-fluoro-4-(BOC-piperazino)]aniline To 150ml of ethyl acetate were sequentially added 9.3g (28.6 mmol) of [3-fluoro-4-(BOC-piperazino)]nitrobenzene synthesized in Preparation Example 3-4-1 and 930mg (10W%) of Pd/C, followed by reaction in a hydrogen reactor under hydrogen pressure of 4bar for 6 hours. After the reaction was complete, Pd/C was filtered through celite. The filtrate was distilled under reduced pressure and dried under vacuum at about 40C to afford 8.22g (yield: 97%) of the desired compound. Mass (M+): 296.1 1H-NMR (DMSO-d6): 1.42(s, 9H), 2.76(brm, 4H), 3.43(brm, 4H), 5.02(s, 2H), 6.33(m, 2H), 6.79(m, 1H).

154590-34-8, As the paragraph descriping shows that 154590-34-8 is playing an increasingly important role.

Reference£º
Patent; Dong Wha Pharm. Co., Ltd.; EP2394993; (2011); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

1235865-77-6, 2-((1H-Pyrrolo[2,3-b]pyridin-5-yl)oxy)-4-(4-((4′-chloro-5,5-dimethyl-3,4,5,6-tetrahydro-[1,1′-biphenyl]-2-yl)methyl)piperazin-1-yl)benzoic acid is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In 25 ml water compound is added in the bottle (J) 100 mg, EDCI67mg, dichloromethane 10 ml, reaction solution stirring 30 minutes, the compound is added (K) (in accordance with WO2012058392 method preparation) 55 mg, finally adding catalytic DMAP, reaction solution adding stirring reaction sleepovers, to splines end of the detection reaction TLC solvent, ABT-199 HPLC purified to get the pure product 98 mg, yield 65%., 1235865-77-6

As the paragraph descriping shows that 1235865-77-6 is playing an increasingly important role.

Reference£º
Patent; Nanjing Acesys Pharmatech Co., Ltd; GE, MIN; XU, YUNLEI; (8 pag.)CN104370905; (2016); B;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

129799-08-2, 1-tert-Butyl 3-methyl piperazine-1,3-dicarboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of crude ethyl 6-tert-butyl-l0-methoxy-2-oxo-9-[2-[2-[2-(p- tolylsulfonyloxy)ethoxy]ethoxy]ethoxy]-6,7-drhydrobenzo[a]quinolizine-3-carboxylate (0382) (compound 10b, 65.8 mg, 0.1 mmol) , l-tert-butyl 3-methyl piperazine- l,3-dicarboxylate (29 mg, 0.12 mmol), potassium carbonate (28 mg, 0.2 mmol) and sodium iodide (15 mg, 0.1 mmol) in acetonitrile (1 mL) was heated at 90 C for 20 h. After cooling to room temperature, the reaction mixture was partitioned between CH2CI2 and water, and then extracted with CH2CI2 for three times. The combined organic layer was washed with brine, dried and concentrated to give crude O l-tert-butyl 03-methyl 4-[2-[2-[2-[(6-tert-butyl-3-ethoxycarbonyl-l0-methoxy-2-oxo-6,7- dihydrobenzo [a] quino lizin-9-yl)oxy] ethoxy] ethoxy] ethyl]piperazine- 1 ,3 -dicarboxylate (0383) (compound 11a, 85 mg) as a brown oil, which was directly used for next step without further purification. MS obsd. (ESI+) [(M+H)+]: 730.

129799-08-2, As the paragraph descriping shows that 129799-08-2 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAN, Xingchun; JIANG, Min; WANG, Yongguang; YANG, Song; (83 pag.)WO2019/129681; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

109-07-9, 2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 11 An experiment was carried out as described for Example 9, except that 45.55 g of 1-butanol and 4.61 g of water (water content 9.2 wtpercent) were used instead of 50.00 g of 1-butanol. As a result, the conversion of 2-methylpiperazine was 94.3percent, and the selectivity of 1-tert-butoxycarbonyl-3-methylpiperazine was 85.8percent (reaction yield 80.9percent).Comparative Example 8 An experiment was carried out as described for Example 9, except that 37.56 g of 1-butanol and 12.67 g of water (water content 25.2 wtpercent) were used instead of 50.00 g of 1-butanol. As a result, the conversion of 2-methylpiperazine was 81.6percent, and the selectivity of 1-tert-butoxycarbonyl-3-methylpiperazine was 70.9percent (reaction yield 57.9percent).Comparative Example 9 An experiment was carried out as described for Example 9, except that 25.00 g of 1-butanol and 25.00 g of water (water content 50.0 wtpercent) were used instead of 50.00 g of 1-butanol. As a result, the conversion of 2-methylpiperazine was 81.2percent, and the selectivity of 1-tert-butoxycarbonyl-3-methylpiperazine was 41.8percent (reaction yield 33.9percent)., 109-07-9

The synthetic route of 109-07-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Toray Fine Chemicals Co., Ltd.; EP1548010; (2005); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4318-42-7,1-Isopropylpiperazine,as a common compound, the synthetic route is as follows.

Step I: (4-bromophenyl)-(4-isopropylpiperazin-1-yl)methanone (1-13) To a stirred solution of 4-bromobenzoic acid 1-12 at 0¡ã C. (2 g, 9.94 mmol) in a mixture of MeCN:DMF (4:1, 20 mL) were added HATU (4.53 g, 11.93 mmol) and 1-isopropylpiperazine (1.91 g, 14.92 mmol). The reaction mixture was allowed to stir for 30 minutes, and then diisopropylethylamine (3.85 g, 5.2 mL, 29.84 mmol) was added thereto. The resulting reaction mixture was stirred for 16 hours at room temperature. After completion of reaction, the reaction mixture was diluted with water and extracted with ethyl acetate (25 mL*3). The combined organic layer was washed with water and brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. The obtained residue was purified by silica gel (60-120 mesh size) column chromatography using 0-5percent methanol in dichloromethane as eluent to give the desired product 1-13 (3.0 g, 97percent) as brown solid; LCMS: m/z 312.00 (M++1)., 4318-42-7

The synthetic route of 4318-42-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KOUL, Summon; KURHADE, Suresh; BHOSALE, Sandeep; NAIK, Keshav; SALUNKHE, Videsh; MUNOT, Yogesh; BHUNIYA, Debnath; (132 pag.)US2017/8885; (2017); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

50606-32-1,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.50606-32-1,Butyl piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

1.5. 4-((S)-2-benzyloxycarbonylamino-4-tert-butoxycarbonyl-butyryl)-piperazine-l- carboxylic acid butyl ester: CbZ-(L)GIu(OtBu)-OH (10 g), HOBT hydrate (5 g), EDCI hydrochloride (6.3 g), intermediate 1.4 (6 g) and DIPEA (10 mL) were dissolved in DCM/THF (1/1, 84 mL). The mixture was stirred at RT for 1 h. DCM and an aq. NaHCO3 solution were added to the mixture and the phases were separated. The org. phase was washed with a M NaHStheta4 solution, dried (Na2SO^ and evaporated off. CC of the crude (EA/Hept 1/2) offered 13.8 g of the desired compound.LC-MS: tR = 1.04 min; [M+H]+: 506.49.

50606-32-1 Butyl piperazine-1-carboxylate 21963126, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; ACTELION PHARMACEUTICALS LTD; CAROFF, Eva; HILPERT, Kurt; HUBLER, Francis; MEYER, Emmanuel; RENNEBERG, Dorte; WO2010/116328; (2010); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.

75336-86-6, [1653] A solution of (R)-(-)-2-methylpiperazine (0.50 g, 0.005 mol, CAS 75336-86-6, Aldrich 39,716-4, 99percent) and 2-bromopyridine (5 mL, 0.05 mol) was heated to 120¡ã C. for 14 hours. The reaction mixture was cooled to 23¡ã C. and partitioned between a large volume of ethyl acetate and water. The layers were separated, and then additional water was added to the ethyl acetate solution. Drops of 1N Hydrochloric acid solution were added to the water/ethyl acetate mixture with vigorous mixing until all of the product was transferred to the aqueous phase. The layers were separated, and the combined aqueous phases concentrated under reduced pressure, and azeotroped with toluene/methanol (5.x.) to afford 1.29 g (>99percent yield) of 3-(R)-methyl-1-pyridin-2-yl-piperazine hydrobromide. 1H NMR (300 MHz, DMSO-d6) delta1.27 (d, J=6.6 Hz, 3H), 2.90 (dd, J=10.5, 14.1 Hz, 1H), 3.10 (m, 2H), 3.40 (m, 2H), 4.32 (m, 2H), 6.77 (dd, J=4.8, 6.9 Hz, 1H), 6.98 (d, J=8.1 Hz, 1H), 7.64 (m, 1H), 8.15 (m, 1H), 8.63 (br s, 1H), 8.92 (br s, 1H); MS (ESI) m/e 178 (M+H)+.

75336-86-6 (R)-2-Methylpiperazine 7330434, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Bhatia, Pramila A.; Daanen, Jerome F.; Hakeem, Ahmed A.; Kolasa, Teodozyj; Matulenko, Mark A.; Mortell, Kathleen H.; Patel, Meena V.; Stewart, Andrew O.; Wang, Xueqing; Xia, Zhiren; Zhang, Henry Q.; US2003/229094; (2003); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.

EXAMPLE 22: 2-Chloro-6-(2-(4-methylpiperazin- 1 -yl)methoxy)pyridine31To a suspension of 2-(4-methylpiperazine-l-yl)ethanol (50mg, 0.347mmol) in dioxane (3ml) at 0¡ãC, KOlBu (50mg, 0.347mmol) was added and the reaction mixture was stirred for lOmin. Ice bath was removed and the reaction mixture was allowed to attain room temperature. The mixture was again cooled to 0¡ãC and 2, 6-Dichloropyrazine (200mg, 1.04mmol) was added. Reaction mixture was allowed to stir at RT for 24h after which it was concentrated and was purified by flash column chromatography over 230-400 silica gel using 5-8percent MeOH/DCM system to afford the desired product 31, 30mg (Yield:35 percent) as brown gummy liquid. The product was confirmed by 1HNMR (not clean but characteristic peaks were present); MS: 256, (M+l), LCMS -90percent.

The synthetic route of 5464-12-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ARRIEN PHARMAEUTICALS LLC; VANKAYALAPATI, Hariprasad; APPALANENI, Rajendra, P.; REDDY, Y., Venkata Krishna; WO2012/135631; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics