Category: piperazines

74879-18-8, (S)-(+)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Alternative preparation of 3-[((2S)-2-Methyl-4-{[4-(trifluoromethyl)phenyl]sulfonyl}-1-piperazinyl)carbonyl]pyrazolo[1,5-a]pyrimidine: Example 2aPyrazolo[1,5-a]pyrimidine-3-carboxylic acid (11.73 g, 71.9 mmol) was suspended in thionyl chloride (36 mL, 493 mmol) and heated at 60 C. for 2 h. Formation of the acyl chloride was monitored as follows: a sample of the reaction mixture was evaporated and added to MeOH and formation of the corresponding methyl ester was detected by UPLC. Then thionyl chloride was removed under reduced pressure to obtain pyrazolo[1,5-a]pyrimidine-3-carbonyl chloride (14 g) as a yellow solid.(2S)-2-methylpiperazine (6 g, 59.9 mmol) was dissolved in tetrahydrofuran (50 mL) and cooled down to 0 C., aqueous sodium hydroxide (3M, 39.9 mL, 120 mmol) was added and stirred for 10 min. Then 4-(trifluoromethyl)benzenesulfonyl chloride (16.12 g, 65.9 mmol) (dissolved in 50 ml of THF) was added drop-wise, stirring the reaction mixture for 1 h. THF was removed under reduced pressure, the aqueous phase was diluted with water (200 ml) and extracted with DCM (2¡Á300 ml). The organic layer was concentrated under reduced pressure and the oily residue was suspended with HCl 1M (200 ml) and washed with DCM in order to extract impurities. NaOH 3M was added to the aqueous layer to reach pH 10 then the mixture was diluted with THF (200 ml), the mixture was cooled down to 0 C.The pyrazolo[1,5-a]pyrimidine-3-carbonyl chloride (14 g) was suspended in THF (80 ml) and added portion-wise to the above mixture, maintaining the pH>9 by adding NaOH 3M, and then the mixture was stirred overnight. THF was removed from the mixture under reduced pressure and the resulting suspension was extracted with DCM (2¡Á300 ml). The organic layer was washed with HCl 0.1 M, dried over Na2SO4 and concentrated to dryness to obtain the crude material (21.7 g) as foam. The crude material was re-dissolved in DCM (100 ml) and evaporated to minimum volume to obtain an oily residue, ethyl ether was added (80 ml) with stirring. A solid crashed out from the solution and was recovered by filtration, washing with ethyl ether before drying to give the title compound (20.06 g).m/z (API-ES) 454 [M+H]+ 1H NMR (400 MHz, CDCl3) delta ppm 1.48 (d, J=7.2 Hz, 3H), 2.56 (td, J=11.6, 3.2 Hz, 1H), 2.69 (dd, J=11.6, 3.6 Hz, 1H), 3.50 (m, 1H), 3.64 (d, J=11.6 Hz, 1H), 3.82 (d, J=11.2 Hz, 1H), 4.25 (m, 1H), 4.78 (m, 1H), 6.97 (dd, J=7.2, 4.0 Hz, 1H), 7.85 (d, J=8.4 Hz, 2H), 7.91 (d, J=8.4 Hz, 2H), 8.39 (s, 1H), 8.59 (dd, J=4.0, 1.6 Hz, 1H), 8.73 (dd, J=7.2, 1.6 Hz, 1H)., 74879-18-8

The synthetic route of 74879-18-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Heer, Jag Paul; Norton, David; Ward, Simon E.; US2010/16330; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.55276-43-2,1-Methanesulfonylpiperazine,as a common compound, the synthetic route is as follows.

55276-43-2, A suspension of 1-methylsulfonylpiperazine (1.58 g, 9.6 mmol), 3-bromo-1-propanol (1.13 ml, 12 mmol) and potassium carbonate (1.73 g, 12 mmol) in acetonitrile (10 ml) was stirred at 40 C. for 4 hours followed by 2 hours at 70 C. The mixture was cooled, filtered and the filtrate was evaporated under vacuum. The residue was purified by column chromatography eluding with methylene chloride/methanol (97/3 followed by 95/5) to give 3-(4-methylsulfonylpiperazin-1-yl)propan-1-ol (1.95 g, 91%). 1H NMR Spectrum: (CDCl3) 1.8 (m, 2H), 2.7 (m, 6H), 2.8 (s, 3H), 3.3 (m, 4H), 3.82 (t, 2H), 4.5 (br s, 1H) MS: 223.4 (M+H)+

55276-43-2 1-Methanesulfonylpiperazine 709161, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Hennequin, Laurent Francois Andre; US2003/212055; (2003); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.129779-30-2,(3R,5S)-rel-tert-Butyl 3,5-dimethylpiperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

To a 20 mL microwave reactor vial was added (3R,5S)-tert-butyl 3,5-dimethylpiperazine- 1 -carboxylate (250 mg, 1.1 67mmol), 1,3 -dibromo-5 -fluorobenzene(592 mg, 2.333 mmol), C52CO3 (950 mg, 2.92 mmol) and toluene (4 mL). The vessel was purged and degassed with N2, then 2,2?-bis(diphenylphosphino)- 1,1 ?-binaphthalene(109 mg, 0.175 mmol) and palladium(II) acetate (52.4 mg, 0.23 3 mmol) were added. The reaction vessel was purged and degassed again. The reaction vessel was capped and the mixture was stirred at 110 C overnight. The reaction mixture was filtered and washed with MeOH and then solvent was removed. The crude was diluted with EtOAc (20 mL),and washed with H20 (20 mL). The orange organic layer was washed with brine, dried over with MgSO4, then concentrated to give crude tert-butyl 4-(3-bromo-5-fluorophenyl) piperazine-1-carboxylate, which was then dissolved in 20% TFA in DCM. The mixture was stirred for 2 hours, concentrated, and then purified by SCX resin (CUBCX1-HL (Benzenesulfonyl, H.L. Resin, 5 g) to provide 1 -((cis)-4-(3 -bromo-5 -fluorophenyl)-3 ,5-dimethylpiperazine, which used directly for next step. LCMS (M+H) = 287.1, 289.1 (1:1 ratio).

129779-30-2, As the paragraph descriping shows that 129779-30-2 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; BHIDE, Rajeev S.; BATT, Douglas G.; CHERNEY, Robert J.; CORNELIUS, Lyndon A.M.; LIU, Qingjie; MARCOUX, David; NEELS, James; POSS, Michael A.; QIN, Lan-ying; RUAN, Zheming; SHI, Qing; SRIVASTAVA, Anurag S.; TINO, Joseph A.; WATTERSON, Scott Hunter; (532 pag.)WO2016/64957; (2016); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.129799-15-1,Methyl 1-Boc-piperazine-2-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of l-(4-(bromomethyl)benzyl)pyridin-2(lH)-one (600 mg, 2.15 mmol, 1.0 eq) in CH3CN (5 mL) were added K2CO3 (0.89 g, 6.45 mmol, 3.0 eq) and 1-tert-butyl 2-methyl piperazine-l,2-dicarboxylate (1.05 g, 4.32 mmol, 2.0 eq). The mixture was heated at 80 C overnight, and then concentrated to dryness under reduced pressure. The residue was mixed with water (10 mL) and extracted with EA (10 mL X 3). The combined organic layers were washed with brine (10 mL), dried over anhydrous Na2S04 and concentrated. The residue was purified via flash chromatography to afford 1-tert-butyl 2-methyl 4-(4-((2-oxopyridin-l(2H)- yl)methyl)benzyl)p

129799-15-1, The synthetic route of 129799-15-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LIFESCI PHARMACEUTICALS, INC.; MCDONALD, Andrew; WO2015/103317; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

5308-25-8, 0.20 g of N-[4-tert-butyl-5-(2,4-dichlorobenzyl)thiazol-2-yl]chloroacetamide and 5 mL of tetrahydrofuran, Stir at room temperature, 0.12 g of pyridine and 0.11 g of N-ethylpiperazine are added; Reaction overnight, Desolvent, Add dichloromethane, Saturated salt water wash, Drying with anhydrous sodium sulfate, Desolvent, Add petroleum ether to precipitate solids, Suction filtration Wash with petroleum ether, Dried to obtain beige solid N-[4-tert-butyl-5-(2,4-dichlorobenzyl)thiazol-2-yl]-2-(4-ethylpiperazinyl)acetamide, yield 77.9 %,

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference£º
Patent; Hunan University; Hu Aixi; Wu Zhilin; Ding Na; Ye Jiao; (20 pag.)CN107365280; (2017); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4318-42-7,1-Isopropylpiperazine,as a common compound, the synthetic route is as follows.

d) 1-(5-fftert-butyldimethylsilyloxy)methynpyridin-2-yl)piperidin-4-yl4- isopropyl-piperazine-1-carboxylate To a solution of 1-(5-((tert-butyldimethylsilyloxy)methyl)pyridin-2-yl)- piperidin-4-ol (257 mg, 1 mmol) in DCM (8 mL) was added BTC (297 mg, 1 mmol) and Et3N (152 mg, 1.5 mmol). The mixture was stirred at rt for 1 h before 1-isopropylpiperazine (128 mg, 1 mmol) was addedand the resulting mixture was stirred at rt overnight. The mixture was diluted with DCM (20 mL), washed with saturated K2C03?(20 mL) solution and brine (20 mL), dried andconcentrated to give the desired product as yellow oil (350 mg, 74percent). [LCMS: RtA?= 1.95min, m/z 477.2 [M+H]+].

4318-42-7, As the paragraph descriping shows that 4318-42-7 is playing an increasingly important role.

Reference£º
Patent; NOVARTIS AG; WANG, Tielin; ZHANG, Xuechun; WO2013/50987; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

115761-79-0, 1-(2,4-Difluorophenyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To 48 (26 mg, 0.1 mmol) in DMF (1 mL) was added 2,4- difluorophenylpiperazine (20 mg, 0.1 mmol). The reaction mixture was stirred for 1.5 hours. To the crude mixture was added 2-thiopheneethylamine (14 pL, 0.12 mmol), DIEA (38 pL, 0.22 mmol) and HATU (42 mg, 0.11 mmol). The reaction was stirred overnight at room temperature. The reaction mixture was poured into water and extracted with EtOAc. The combined organic layers were washed with 0.1 N NaOH, 0.1 N HCI, and brine; dried over sodium sulfate and concentrated in vacuo to yield 49 as an oil (49 mg, 94%). HPLC- MS tR = 2.10 min (UV254 nm); mass calculated for formula C24H27F2N3O6S 523.2, observed LCMS m/z 524.4 (M+H) ; purity > 95% (ELSD).

115761-79-0, As the paragraph descriping shows that 115761-79-0 is playing an increasingly important role.

Reference£º
Patent; SCHERING CORPORATION; WO2005/121130; (2005); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Chemistry can be defined as the study of matter and the changes it undergoes. You¡¯ll sometimes hear it called the central science because it is the connection between physics and all the other sciences, starting with biology. 5625-37-6, Name is 2,2′-(Piperazine-1,4-diyl)diethanesulfonic acid, molecular formula is , belongs to piperazines compound. In a document, author is Zhou, Shiyang, SDS of cas: 5625-37-6.

The antagonistic activity of H 1 receptor antagonists as medicinal foods

At present, there are many kinds of H1 receptor antagonists as medicinal foods in clinical application, which can be divided into ethylenediamine antagonist, aminoether antagonist, propylamine antagonist, tricyclic antagonist, piperazine antagonist and piperidine antagonist according to their chemical structures. Herein, the research progresses of allergic reactions of histamine H1 receptor antagonists as medicinal foods were reviewed, and the important aspects of design, synthesis and biological activity of various new compounds were expounded.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5625-37-6, in my other articles. SDS of cas: 5625-37-6.

Reference:
Piperazine – Wikipedia,
,Piperazines – an overview | ScienceDirect Topics

Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, Recommanded Product: 139755-85-4139755-85-4, Name is 5-(2-Ethoxy-5-((4-(2-hydroxyethyl)piperazin-1-yl)sulfonyl)phenyl)-1-methyl-3-propyl-1H-pyrazolo[4,3-d]pyrimidin-7(6H)-one, SMILES is O=C1C(N(C)N=C2CCC)=C2N=C(C3=CC(S(=O)(N4CCN(CCO)CC4)=O)=CC=C3OCC)N1, belongs to piperazines compound. In a article, author is Jilla, Lavanya, introduce new discover of the category.

Synthesis and antimicrobial agents of thiazolidinone derivatives from benzocyclohepetenone

A series of benzosuberone coupled piperazin-1-yl thiazolidin-4-one derivatives6a-jwere synthesized from 3-(2-[9-chloro-2,3-dimethyl-6,7-dihydro-5H-benzo[7]annulen-8-yl]-4-oxothiazolidin-3-yl)propanoic acid (4) and substituted piperazines/secondary amines5a-jusing 1-hydroxy benzotriazole, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride and triethyl amine in good yields and their structures were characterized by(1)H NMR,C-13 NMR, IR, and Mass spectra. The newly synthesized compounds were evaluated for their antimicrobial activity against bacterial strains and a fungal strain. Compounds6fand6gwere indicated promising and broad spectrum antibacterial activity.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions. you can also check out more blogs about 139755-85-4. Recommanded Product: 139755-85-4.

Reference:
Piperazine – Wikipedia,
,Piperazines – an overview | ScienceDirect Topics

Electric Literature of 139755-85-4, Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential. 139755-85-4, Name is 5-(2-Ethoxy-5-((4-(2-hydroxyethyl)piperazin-1-yl)sulfonyl)phenyl)-1-methyl-3-propyl-1H-pyrazolo[4,3-d]pyrimidin-7(6H)-one, SMILES is O=C1C(N(C)N=C2CCC)=C2N=C(C3=CC(S(=O)(N4CCN(CCO)CC4)=O)=CC=C3OCC)N1, belongs to piperazines compound. In a article, author is Regeni, Irene, introduce new discover of the category.

Coal-Tar Dye-based Coordination Cages and Helicates

A strategy to implement four members of the classic coal-tar dye family, Michler’s ketone, methylene blue, rhodamine B, and crystal violet, into [Pd2L4] self-assemblies is introduced. Chromophores were incorporated into bis-monodentate ligands using piperazine linkers that allow to retain the auxochromic dialkyl amine functionalities required for intense colors deep in the visible spectrum. Upon palladium coordination, ligands with pyridine donors form lantern-shaped dinuclear cages while quinoline donors lead to strongly twisted [Pd2L4] helicates in solution. In one case, single crystal X-ray diffraction revealed rearrangement to a [Pd3L6] ring structure in the solid state. For nine examined derivatives, showing colors from yellow to deep violet, CD spectroscopy discloses different degrees of chiral induction by an enantiomerically pure guest. Ion mobility mass spectrometry allows to distinguish two binding modes. Self-assemblies based on this new ligand class promise application in chiroptical recognition, photo-redox catalysis and optical materials.

Electric Literature of 139755-85-4, The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 139755-85-4 is helpful to your research.

Reference:
Piperazine – Wikipedia,
,Piperazines – an overview | ScienceDirect Topics