Some tips on 1-Boc-3-Oxopiperazine

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.76003-29-7,1-Boc-3-Oxopiperazine,as a common compound, the synthetic route is as follows.,76003-29-7

This compound was prepared as set out in step 1 of the scheme for example 4. NMR (300 MHz, CDC13) delta 9.09 (d, J= 2.1 Hz, 1H), 7.73 (d, J = 2.1 Hz, 1H), 7.53- 7.43 (m, 2H), 7.42-7.31 (m, 3H), 5.33 (s, 2H), 4.30 (s, 2H), 3.93-3.72(m, 7H), 1.51 (s, 9H)MS (ESI+) m/z 587 (M[Br79]+l), 589 (M[Br81]+l)

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; AVEXA LIMITED; SHANGHAI INSTITUTE OF ORGANIC CHEMISTRY (SIOC); RHODES, David, Ian; DEADMAN, John, Joseph; LE, Giang, Thanh; VAN DE GRAFF, Nicholas, Andrew; LONG, Lu; XINMING, Li; XIAO, Feng; CHANGJIANG, Yu; WO2012/6680; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 76003-29-7

As the paragraph descriping shows that 76003-29-7 is playing an increasingly important role.

76003-29-7, 1-Boc-3-Oxopiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

76003-29-7, In reference to the process disclosed in WO2012/031004, 2-nitro-5-bromopyridine (1.01 g, 5.0 mmol), tert-butyl 2-oxo-4-piperazinecarboxylate (1.00 g, 5.0 mmol, and cesium carbonate (3.26 g, 10.0 mmol) were suspended in 1,4-dioxane, and the suspension was bubbled with nitrogen gas for 30 minutes. To the suspension was added Xantphos (246 mg, 0.43 mmol) and tris(dibenzylideneacetone)dipalladium (229 mg, 0.25 mmol), and the mixture was stirred under reflux for two hours. The resultant reaction mixture was cooled to room temperature, and water and ethyl acetate were then added to the mixture, followed by filtration with Celite. The organic phase was separated from the filtrate, and the aqueous phase was extracted with ethyl acetate. The resultant organic phases were combined together and dried over anhydrous sodium sulfate, and the resultant solid was separated by filtration. The filtrate was concentrated under reduced pressure, and the residue was purified by silica gel column chromatography to yield the title compound (1.08 g, 67%). 1H-NMR (CDCl3) delta: 8.67 (1H, d, J=2.4 Hz), 8.32 (1H, d, J=8.8 Hz), 8.15 (1H, dd, J=8.8, 2.4 Hz), 4.33 (2H, s), 3.93-3.83 (4H, m), 1.51 (9H, s)

As the paragraph descriping shows that 76003-29-7 is playing an increasingly important role.

Reference£º
Patent; Teijin Pharma Limited; MIZUNO, Tsuyoshi; SHIMADA, Tomohiro; UNOKI, Gen; EBISAWA, Masaru; TAKEUCHI, Susumu; MINAMIZONO, Kunio; SASAKI, Kosuke; YOKOSAKA, Takuya; IGARASHI, Junji; MARUYAMA, Akinobu; TAKAHASHI, Hiroshi; HORIE, Kyohei; SAKAI, Yuri; (447 pag.)EP3305785; (2018); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 1-Boc-3-Oxopiperazine

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

76003-29-7,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.76003-29-7,1-Boc-3-Oxopiperazine,as a common compound, the synthetic route is as follows.

Step 1: tert-butyl 4-(4-fluorophenyl)-3-oxopiperazine-1-carboxylate To a solution of tert-butyl 3-oxopiperazine-1-carboxylate (prepared according to procedure reported in WO2005504737, 2.0 g, 9.99 mmol), 1-bromo-4-fluorobenzene (1.748 g, 9.99 mmol), N,N-dimethylethylenediamine (0.070 g, 0.799 mmol) and potassium hydrophosphate (KHPO4) (3.13 g, 17.98 mmol) in toluene (10 ml) was added copper (I)iodide (0.101 g, 0.529 mmol) at 25 C. The reaction mixture was heated to 80 C. for 16 h. Progress of the reaction was monitored by TLC. The reaction mixture was cooled to 25 C., diluted with ethyl acetate (25 ml) and filtered through a plug of celite and concentrated to give crude product. The crude product was purified over silica gel (100-200 mesh) by column chromatography using 30% ethyl acetate in hexane as eluent to obtain the title compound (0.8 g, 27.2%) 1H NMR (400 MHz, CDCl3) delta 7.28-7.24 (m, 2H), 7.14-7.08 (m, 2H), 4.26 (s, 2H), 3.88-3.71 (m, 4H), 1.51 (s, 9H). MS: m/z 295 (M+1).

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LUPIN LIMITED; Jana, Gourhari; Kurhade, Sanjay Pralhad; Jagdale, Arun Rangnath; Kukreja, Gagan; Sinha, Neelima; Palle, Venkata P.; Kamboj, Rajender Kumar; US2015/152118; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Simple exploration of 76003-29-7

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

76003-29-7, 1-Boc-3-Oxopiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Scheme 3: Synthesis of ie/t-butyl 3-ethoxy-5,6-dihydropyrazine-l(2H)-carboxylate laTo a pre-made solution of triethyloxonium tetrafluoroborate (2.3 g, 0.012 mol) in anhydrous DCM (20 mL) was added 1.2a (2 g, 0.01 mol) at 0 C. After the addition was completed, the ice-bath was removed, and the reaction mixture was allowed to warm to RT and stirred for an additional hour (reaction progress monitored by LCMS). Upon completion of the reaction, a saturated solution of NaHC03 (500 mL) was slowly added to the reaction mixture and it was stirred for 5 min. The organic layer was separated and the aqueous layer was further extracted with DCM (200 mL). The combined organic layers were subsequently washed with brine, dried over MgS04, filtered and further dried in vacuo to obtain the title intermediate la as viscous yellow oil. Yield: 2.03 g (88 %).1H NMR (CDC13): delta: 4.1 (q, J = 7.1, 2H), 3.85 (s, 2H), 3.5 (m, 1H), 3.35 (t, J = 5.1, 2H), 1.45 (s, 9H), 1.3 (t, J = 7.1, 3H)., 76003-29-7

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; EUROSCREEN S.A.; HOVEYDA, Hamid; DUTHEUIL, Guillaume; FRASER, Graeme; ROY, Marie-Odile; EL BOUSMAQUI, Mohamed; BATT, Frederic; WO2013/50424; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Simple exploration of 1-Boc-3-Oxopiperazine

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

76003-29-7, 1-Boc-3-Oxopiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,76003-29-7

step 1: To a mixture of NaH (430 mg, 1.8 mmol) in DMF (5 mL) was added tert-butyl 3-oxopiperazine-1-carboxylate (3.0 g, 1.5 mmol) and 2-bromoacetonitrile (1.8 g, 1.5 mmol) at 0 C. The mixture was stirred at RT overnight. The reaction mixture was then diluted with EtOAc (10 mL) and H2O (10 mL). The separated organic layer was washed with brine, dried (MgSO4), filtered and concentrated in vacuo. The residue was purified by SiO2 chromatography eluting with DCM/MeOH (40:1) to afford tert-butyl 4-(cyanomethyl)-3-oxopiperazine-1-carboxylate as yellow oil (3.0 g, 76%). LCMS (ESI): m/z=240.1 [M+1]+

The synthetic route of 76003-29-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GENENTECH, INC.; Rudolph, Joachim; Gazzard, Lewis J.; Crawford, James J.; Ndubaku, Chudi; Drobnick, Joy; Lee, Wendy; US2015/31674; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 1-Boc-3-Oxopiperazine

As the paragraph descriping shows that 76003-29-7 is playing an increasingly important role.

76003-29-7, 1-Boc-3-Oxopiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution [OF TERT-BUTYL 3-OXOPIPERAZINE-1-CARBOXYLATE] (0.500 mg, 2. [50] mmol) in 10 mL of DMF at [0 C] was added NaH as a 60% dispersion in mineral oil (2.62 mmol), and the reaction was stirred for 45 minutes. [4-BROMO-1-BUTENE] was added (0.280 mL, 2.75 mmol) dropwise as a solution in 1 mL of THF. The solution was stirred overnight, allowing it to warm to room temperature. The reaction was partitioned between EtOAc and saturated [NAHC03] solution. The organic phase was washed with brine, dried [(NA2S04),] filtered, and concentrated in vacuo to give the titled compound. Proton NMR for the product was consistent with the titled compound. ESI+MS : 255.1 [[M+H]] [+.], 76003-29-7

As the paragraph descriping shows that 76003-29-7 is playing an increasingly important role.

Reference£º
Patent; MERCK & CO., INC.; WO2004/14851; (2004); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics