Category: 75336-86-6

75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 106: Synthesis of 6-(( R )-4-(4-Cyanophenyl)-2-methylpiperazin-1-yl)- N -(( E )-5-hydroxyadamantan-2-yl)picolinamide [300] [301] Step 1: Synthesis of ( R )-4-(3-methylpiperazin-1-yl)benzonitrile [302] 4-Bromobenzonitrile (200 mg, 1.099 mmol), (R)-2-methylpiperazine (121 mg, 1.209 mmol), Pd2(dba)3 (20 mg, 0.022 mmol), BINAP (41 mg, 0.066 mmol), and sodium-tert-butoxide (211 mg, 2.199 mmol) were suspended in toluene (5 ml), and then the resulting liquid was stirred at 100oC under nitrogen stream for 5 hours. 1N aqueous HCl solution (20 ml) was added to the resulting reaction liquid, followed by extraction with MC (10 ml x 2). The aqueous layer was neutralized by addition of 5N aqueous NaOH solution, followed by extraction with 5percent MeOH/MC (20 ml x 2). The organic layer was dried over anhydrous sodium sulfate, followed by filtration and concentration, and then the residue thus obtained was subjected to MPLC (10percent MeOH/MC), to obtain 152 mg of pale yellow oil (69percent)., 75336-86-6

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; SK Chemicals Co.,Ltd.; RYU, Je Ho; KIM, Shin Ae; RYU, Keun Ho; KIM, Jae Sun; KIM, Nam Ho; HAN, Hye Young; KIM, Yong Hyuk; YOUN, Won-No; LEE, Yoon-Jung; SON, Hyun Joo; LEE, Bong-yong; PARK, Sung Hoon; LEE, Ju Young; LEE, Hyun Jung; JUNG, Hoe Chul; SHIN, Young Ah; LEE, Jung A; LEE, Bo Ram; SA, Joon Ho; WO2011/139107; (2011); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.

General procedure: To a stirred mixture of homopiperazine (0.60 g, 6.00 mmol), 4-fluorobenzaldehyde (0.60 g, 5.00 mmol) in DCM (15 mL) wasadded AcOH (0.08 mL, 0.50 mmol) and the mixture was stirred atroom temperature for 0.5 h. Then sodium triacetoxyborohydride(1.60 g, 7.50 mmol) was added in portions. The reaction was stirredat the same temperature for 6 h. Finally, the mixture was dilutedwith saturated aqueous NaHCO3 (15.00 mL) followed by water(15.00 mL) and extracted with EtOAc (3 15.00 mL). The organiclayer was dried (MgSO4), filtered, and concentrated in vacuo. Theresidue was purified by column chromatography on silica gel (EtOAc/PE 5:1) to afford yellow oil (0.90 g, yield 77percent)., 75336-86-6

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Article; Hu, Suwen; Wang, Zhilong; Hou, Tingjun; Ma, Xiaodong; Li, Jing; Liu, Tao; Xie, Xin; Hu, Yongzhou; Bioorganic and Medicinal Chemistry; vol. 23; 5; (2015); p. 1157 – 1168;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

75336-86-6, To a solution of (R)-methylpiperazine (400 mg) in dichloromethane (20 mL) at 0 0C was added di-tert-butyl dicarbonate (871 mg). The reaction was stirred at room temperature for 4 h and then quenched with water (20 mL) and extracted into dichloromethane (2 x 40 mL). The combined organics were washed with saturated aqueous brine solution (40 mL), dried (MgSO4) and concentrated to give (R)-3-methyl-piperazine-l- carboxylic acid tert-butyl ester as a white solid (669 mg, 84%).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; PIRAMED LIMITED; GENENTECH, INC.; BAYLISS, Tracy; CHUCKOWREE, Irina; FOLKES, Adrian; OXENFORD, Sally; WAN, Nan, Chi; CASTANEDO, Georgette; GOLDSMITH, Richard; GUNZNER, Janet; HEFFRON, Tim; MATHIEU, Simon; OLIVERO, Alan; STABEN, Steven; SUTHERLIN, Daniel, P.; ZHU, Bing-Yan; WO2008/70740; (2008); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6,75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Part A Synthesis of (R)-1-(3-Chloro-pyridin-2-yl)-3-methyl-piperazine: Dissolve 2,3-dichloropyridine (8.5 g, 0.057 moles) and (R)-(-)-2-methylpiperazine (5.75 g, 0.057 moles) in N,N-dimethylacetamide (125.0 mL) under nitrogen atmosphere. Add anhydrous powdered K2CO3 (23.75 g, 0.172 moles) to this mixture and stir at 135-140° C. for 48 h. New spot noticed in TLC (5percent MeOH / CHCl3 / 1percent NEt3) along with absence of starting materials. Cool the reaction mixture to room temperature, dilute with water (400 mL), extract with EtOAc (3*200 mL) and wash the combined organic extract with brine (2*150 mL). Dry over MgSO4, concentrate under vacuum to afford crude product (20.0 g) as orange yellow liquid. Distil the crude under high vacuum to afford pyridylpiperazine derivative as yellow viscous oil (10 g, bp 112-115° C. /0.1 torr). NMR (CDCl3): delta.. 1.1-1.12 (d, 3H, J=1.6 Hz), 2.50-2.53 (t, 1H), 2.83-2.87 (m, 1H), 3.06-3.08 (m, 3H), 3.67-3.75 (m, 2H), 6.80-6.82(dd, 1H), 7.56-7.58 (dd, 1H), 8.17-8.18 (dd, 1H).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; Bakthavatchalam, Rajagopal; Hutchison, Alan; DeSimone, Robert W.; Hodgetts, Kevin J.; Krause, James E.; White, Geoffrey G.; US2002/132853; (2002); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

75336-86-6, Intermediate 26:; (3R)-3-methyl-l-[4-(methylsulfonyl)phenyl]piperazine; A mixture of 4-fluorophenyl methyl sulfone (2.00 g), (R)-2-methylpiperazine (2.30 g) and K2CO3 (3.20 g) in anhydrous DMF (80 mL) was heated at 100°C for 5 hours. The reaction mixture was filtered to remove salts and the solvent was evaporated under reduced pressure to give a yellow oil. Purification by flash chromatography (CHCls/MeOH) gave 1.36 g (47percent) of the title compound as a pale yellow solid. M^SI): 255.2. HPLC (Condition A), Rt: 1.0 min (HPLC purity: 100 percent).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; Applied Research Systems ARS Holding N.V.; WO2006/10751; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

75336-86-6, Intermediate 26:; (3R)-3-methyl-l-[4-(methylsulfonyl)phenyl]piperazine; A mixture of 4-fluorophenyl methyl sulfone (2.00 g), (R)-2-methylpiperazine (2.30 g) and K2CO3 (3.20 g) in anhydrous DMF (80 mL) was heated at 100°C for 5 hours. The reaction mixture was filtered to remove salts and the solvent was evaporated under reduced pressure to give a yellow oil. Purification by flash chromatography (CHCls/MeOH) gave 1.36 g (47percent) of the title compound as a pale yellow solid. M^SI): 255.2. HPLC (Condition A), Rt: 1.0 min (HPLC purity: 100 percent).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; Applied Research Systems ARS Holding N.V.; WO2006/10751; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.,75336-86-6

Example 1] Synthesis of compound (I-40) a) Synthesis compound 3 [Show Image] [Show Image] Under the nitrogen atmosphere, toluene (7.5 ml) was added to a commercially available compound 2 (1.50 g, 7.30 mmol), a commercially available compound 1 (1.50 g, 7-30 mmol), and sodium tert-butoxide (842 mg, 8.76 mmol) were added, and the system was degassed, and replaced with nitrogen. Xantphos (127 mg, 0.22 mmol) and Pd2(dba)3 (67 mg, 0.67 mmol) were added to react them at 100°C for 1 hour. Toluene (8 ml) was added to dilute the reaction, and this was filtered using Celite. The filtrate was concentrated under reduced pressure, and the resulting residue was purified by silica gel column chromatography (chloroform-methanol) to obtain a compound 3 (1.27 g, yield 77percent). 1H-NMR (CDCl3 / TMS) deltappm: 1.13 (d, J = 6.2Hz, 3H), 1.57 (s, 1H), 2.28-2.37 (m, 1H), 2.35 (s, 3H), 2.67 (dt, J = 3.5, 11.6Hz, 1H), 2.92-3.15 (m, 3H), 3.46 (d, J = 11.6Hz, 2H), 6.69 (dd, J = 8.9, 2.7Hz, 1H), 6.78 (d, J = 2.7Hz, 1H), 7.19 (d, J = 8.9Hz, 1H).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; Shionogi&Co., Ltd.; EP2184272; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.

EtOH (250 mL) was added to a mixture of 5-bromo-2-chloropyrimidine (5 g, 25.8 mmol) and (R)-2- methylpiperazine (2.74 g, 27.4 mmol) followed by the addition of TEA (9.98 mL, 71.6 mmol) under a nitrogen atmosphere. The reaction was stirred at about 78 °C for about 8 h. The reaction was cooled to about rt and concentrated under reduced pressure. The residue was triturated with 20: 1 DCM/MeOH (150 mL) and stirred for 30 min. The solid was collected by filtration and dried under vacuum to afford title compound (5 g, 75 percent) as the HC1 salt; lH NMR (400MHz, DMSO-t/6) delta 9.66 (br. s., 2H), 8.53 (s, 2H), 4.53 (d, J=13.7 Hz, 2H), 3.34 – 3.20 (m, 3H), 3.18 – 3.08 (m, 1H), 3.03 – 2.92 (m, 1H), 1.29 (d, J=6.2 Hz, 3H)

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; ABBVIE INC.; BREINLINGER, Eric, C.; COX, Phil, B.; DAANEN, Jerome; DIETRICH, Justin; DJURIC, Stevan; DOMBROWSKI, Amanda, W.; FRANK, Kristine, E.; FRIEDMAN, Michael, M.; GOMTSYAN, Arthur; LI, Huan-Qui; LONGENECKER, Kenton; OSUMA, Augustine; ROWLEY, Ann, Marie; SCHMIDT, Robert; VASUDEVAN, Anil; WILSON, Noel; (378 pag.)WO2016/168641; (2016); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.

75336-86-6, Step 1: 3-(R)-Methyl-piperazine-1-carboxylic Acid Tert-Butyl Ester Triethylamine (3 g, 4.2 mL, 30 mmol) was added to a solution of (R)-2-methyl piperazine (2 g, 20 mmol) in dichloromethane (40 mL) followed by di-tert-butyl-dicarbonate (4.8 g, 22 mmol). The reaction mixture was stirred at room temperature for 20 h. The mixture was diluted with dichloromethane and washed with saturated aqueous sodium bicarbonate and brine and dried over sodium sulfate. The crude product was purified using a short plug of silica gel using hexane/ethyl acetate (1:1). 1H-NMR (CDCl3) delta: 1.05 (3H, d), 1.45 (9H, s), 2.11 (1H, s), 2.37-2.44 (1H, m), 2.66-2.79 (3H, m), 2.93-2.96 (1H, m), 3.93 (2H, br s). ESI-MS m/z: 201(M+1).

As the paragraph descriping shows that 75336-86-6 is playing an increasingly important role.

Reference：
Patent; Luly, Jay R.; Nakasato, Yoshisuke; Ohshima, Etsuo; Harriman, Geraldine C.B.; Carson, Kenneth G.; Ghosh, Shomir; Elder, Amy M.; Mattia, Karen M.; US2005/70549; (2005); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75336-86-6,(R)-2-Methylpiperazine,as a common compound, the synthetic route is as follows.,75336-86-6

i) tert-Butyl (3/?)-3-methylpiperazine-l-carboxylate;To a solution of (2No.)-2-methylpiperazine (Ig) in THF (10ml) was added di-tert-butyldicarbonate (1.45g). The reaction mixture was allowed to stir at room temperaturefor 18h.The reaction mixture was then partitioned between DCM (100 ml) and HaO (100 ml). Theorganics were separated and the aqueous layer was re-extracted with DCM (2 x 150ml).Organics were combined, dried (MgSO4) and reduced in vacuo to give the subtitle compoundas a clear oil. Yield: 1. Ig’H NMR: (DMSO) 8 0.92 (d, 3H), 1.38 (s, 9H), 2.57-2.70 (m, 1H), 2.76-2.81 (m, 1H), 2.87-2.99 (m, 1H), 3.66-3.74 (m, 4H)

The synthetic route of 75336-86-6 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/24823; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics