Category: 5464-12-0

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.

Example 12(5Z)-5-[(1-{[4-(Methyloxy)-2-(trifluoromethyl)phenyl]methyl}-1H-indazol-5-yl)methylidene]-3-[2-(4-methyl piperazin-1-yl)ethyl]-1,3-thiazolidine-2,4-dione (5Z)-5-[(1-{[4-(Methyloxy)-2-(trifluoromethyl)phenyl]methyl}-1H-indazol-5-yl)methylidene]-3-[2-(4-methylpiperazin-1-yl)ethyl]-1,3-thiazolidine-2,4-dione was prepared from [(5Z)-5-({1-[4-methoxy-2-(trifluoromethyl)benzyl]-1H-indazol-5-yl}methylidene)-2,4-dioxo-1,3-thiazolidine (from Example 8) and 2-(4-methylpiperazin-1-yl)ethanol following General Procedure J.1H NMR (400 MHz, CDCl3): delta 8.15 (d, 1H), 8.09 (m, 1H), 7.92 (s, 1H), 7.56 (dd, 1H), 7.29 (d, 1H), 7.22 (d, 1H), 6.86 (dd, 1H), 6.67 (d, 1H), 5.75 (s, 2H), 3.98 (br, 2H), 3.79 (s, 3H), 3.73 (br, 2H), 3.45 (br, 2H), 3.15 (t, 2H), 2.50 (br, 4H), 2.34 (s, 3H).LC/MS: mass calcd. for C17H28F3N5O3S: 559.19, found 560.3 [M+H]+ General Procedure J. To a mixture of 5-[1-(substituted benzyl)-1H-heteroar-5-ylmethylene]-1,3-thiazolidine-2,4-dione from Procedure E (0.25 mmol), an aliphatic alcohol (0.375 mmol) and Ph3P (0.375 mmol), in THF (2 mL) was added DIAD (0.375 mmol) and the solution was stirred at rt for 2 h. The reaction was concentrated in vacuo and the resultant residue was purified by silica gel chromatography (DCM/MeOH) to afford the desired 5-[1-(substituted benzyl)-1H-heteroar-5-ylmethylene]-(3-alkylated)-1,3-thiazolidine-2,4-dione product, 5464-12-0

Big data shows that 5464-12-0 is playing an increasingly important role.

Reference：
Patent; Bignan, Gilles; Cheung, Wing; Gaul, Micheal; Huang, Hui; Li, Xun; Patch, Raymond; Patel, Sharmila; Player, Mark; Xu, Guozhang; Zhao, Bao-Ping; Liu, Jian; US2011/294780; (2011); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5464-12-0, To mixture of Scheme 41 compound 1 (2.00 g, 9.80 mmol), Scheme 41 compound 2 (1.41 g, 9.85 mmol), Cs2C03 (9.60 g, 29.55 mmol) and Xantphos (569 mg, 0.98 mmol) in dry toluene (20 mL) was added Pd(OAc)2 (221 mg, 0.98 mmol) and the reaction mixture was heated to 90°C for 12 h. After TLC showed the starting material was completely consumed, the reaction mixture was cooled to RT, passed through a pad of celite and washed with EtOAc. The filtrate was washed with water and brine, dried over Na2S04 and concentrated to give a residue which was purified by flash chromatography on silica gel (eluting with CH2Cl2/MeOH 100/0 gradually increasing to 95/5) to give Scheme 41 compound 3 (1.10 g, 33percent) as a pale yellow solid. MS [ESI, MH+] = 267.13.

As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

Reference：
Patent; MANNKIND CORPORATION; TOLERO PHARMACEUTICALS, INC.; ZENG, Qingping; FARIS, Mary; MOLLARD, Alexis; WARNER, Steven L.; FLYNN, Gary A.; WO2014/52365; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5464-12-0

General procedure: A vial was charged with 2-trifluoromethyl, 5-nitroflurobenzaldehyde (1.4 mmol), various aminoalcohols (1.4 mmol) and anhydrous tetrahydrofuran (10 mL). The reagents were stirred vigorously and cooled to 0 °C in an ice-water bath. Sodium hydride (2.8 mmol) was added portionwise to the mixture over 5 minutes and the resulting suspension warmed to room temperature and stirred for 48 hours. The reaction was quenched by the addition of water (5 mL) and brine (5 mL) and product extracted into diethyl ether. The organic layer was dried, decolorized with activated charcoal, filtered, and evaporated in vacuo to afford the crude product that was purified on silica with methanol/ethyl acetate as the eluent.

As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

Reference：
Article; Taylor, Steven J.; Soleymanzadeh, Fariba; Muegge, Ingo; Akiba, Isamu; Taki, Naoyuki; Ueda, Saisoku; Mainolfi, Elizabeth; Eldrup, Anne B.; Bioorganic and Medicinal Chemistry Letters; vol. 23; 7; (2013); p. 2177 – 2180;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.

Sodium hydride (60percent, 0.87 g, 21.80 mmol) was added to diglyme (10 mL). A solution of 2-(4-methyl-piperazin-1-yl)-ethanol (3.14 g, 21.80 mmol) in diglyme (10 mL) was added slowly. The reaction mixture was heated at 40 00 for 1 hour, 4-chloro-pyridin- 2-ylamine (1.40 g, 10.9 mmol) was added and the reaction mixture was heated at 8000 for 1 hour, then at 15700 for 16 hours. The reaction mixture was cooled, diluted with water (20 mL), and THF (20 mL) was added, then NaCI. The organic phase was separated, and the aqueous phase was extracted with THF. The combined organic phase was dried, and the solvent was evaporated. Diethyl ether was added to the residue. The resulting solid was filtered, washed with ether, and dried to afford a white solid (1.86 g, 72percent), (M+H)=237.

The synthetic route of 5464-12-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTEX THERAPEUTICS LIMITED; SAXTY, Gordon; MURRAY, Christopher William; BERDINI, Valerio; PAGE, Lee William; ROOMANS, Susan; TAMANINI, Emiliano; BUCK, Ildiko Maria; DAY, James Edward Harvey; CARR, Maria Grazia; LEE, Lydia Yuen Wah; WO2015/4481; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0,5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

NaH (0.039g, 0.96 mmol, 60percent dispersion in oil) was taken up in a dry capped microwave vial. To this, 1-(2-hydroxyethyl)-4-methylpiperazine (0.023g, 0.16mmol) dissolved in dry tetrahydrofuran ( 1.6mL) was added dropwise. The mixture was stirred at rt for 20 min. Intermediate C ( 0.075g, 0.16mmol) was then added in one portion to this suspension and the mixture was heated to 67¡ã C in the closed seal tube for 25 min. The mixture was allowed to reach at rt and quenched with a few drops of methanol. Solvent was removed under vacuum and the resultant crude was subjected to FCC eluting with DCM- MeOH (95/5) to furnish the desired product D ( 0.081g).

The synthetic route of 5464-12-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ARIAD PHARMACEUTICALS, INC.; ZHU, Xiaotian; WANG, Yihan; SHAKESPEARE, William, C.; HUANG, Wei-Sheng; DALGARNO, David, C.; WO2013/169401; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0,5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10.0 g Preparation 3a (37.2 mmol,), 8.7 g 2-(4-methylpiperazin-l-yl)ethanol (60.3 mmol) and 15.8 g PPh3 (60.3 mmol) were dissolved in 100 mL dry toluene and then 27 mL DEAD (60.3 mmol, 40 percent solution in toluene) was added dropwise. The mixture was stirred at 50 ¡ãC under argon atmosphere until no further conversion was observed. The volatiles were evaporated under reduced pressure and 100 mL Et20 was added. The precipitated white crystals were filtered off and washed with Et20. The filtrate was concentrated under reduced pressure and purified via flash chromatography using CHCI3 and MeOH as eluents. The resulting light brown oil was crystallized from hexane to give Preparation 3b as an off-white solid. 1H NMR (500 MHz, DMSO-d6) delta: 7.56 (d, 1H), 6.99 (d, 1H), 4.15 (t, 2H), 2.72 (t, 2H), 2.51 (s, 3H), 2.50 (br s, 4H), 2.29 (br s, 4H), 2.13 (s, 3H), 1.29 (s, 12H)

The synthetic route of 5464-12-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LES LABORATOIRES SERVIER; VERNALIS (R&D) LIMITED; BALINT, Balazs; CSEKEI, Marton; SZABO, Zoltan; SZLAVIK, Zoltan; KOTSCHY, Andras; CHANRION, Maia; GENESTE, Olivier; CHEN, I-Jen; DAVIDSON, James Edward Paul; MURRAY, James Brooke; SIPOS, Szabolcs; ONDI, Levente; PROSZENYAK, Agnes; (164 pag.)WO2016/207217; (2016); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 42 2-(4-Methylpiperazin-1-yl)ethyl 4-(4-fluorobenzyl)piperazine-1-carboxylate 2-(4-Methyl-piperazin-1-yl)-ethanol (0.86 g, 6 mmol) and NMM (0.58 mL, 6 mmol) were dissolved in DCM (8 mL) and the reaction mixture was cooled to 0¡ã C. 4-nitrophenyl chloroformate (1.29 g, 6 mmol) was added and the reaction mixture stirred for 1 h. To the reaction mixture was added a solution of 1-(4-fluoro-benzyl)-piperazine (0.97 g, 5 mmol) and DIPEA (6.0 mL, excess) in DMF (20 mL). The reaction mixture was stirred at room temperature overnight and then concentrated in vacuo. The residue was dissolved in EtOAc (150 mL), washed with sat aq Na2CO3 solution (6*100 mL), dried (MgSO4) and the solvent removed in vacuo. The residue was initially purified by column chromatography (normal phase, 20 g, Strata SI-1, silica gigatube, 20 mL/min, gradient 0percent to 15percent MeOH in DCM) and then further purified by reverse phase column chromatography (LiChroprep RP-18, 40-63 mum, 460*26 mm (100 g), 30 mL/min, gradient 0percent to 30percent (over 40 min) MeOH in water with 1percent formic acid). The residue was stirred for 2 h in DCM (10 mL) with K2CO3 (~0.20 g), filtered and then dried in a vacuum oven overnight to give 2-(4-methylpiperazin-1-yl)ethyl 4-(4-fluorobenzyl)piperazine-1-carboxylate (0.39 g, 21percent) as a pale yellow oil. Analytical HPLC: purity 99.7percent (System A, RT=3.09 min); Analytical LCMS: purity 100percent (System A, RT=3.55 min), ES+: 365.6 [MH]+; HRMS calcd for C19H29FN4O2: 364.2275, found 364.2292., 5464-12-0

Big data shows that 5464-12-0 is playing an increasingly important role.

Reference£º
Patent; Biovitrum AB; US2009/281087; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.,5464-12-0

To a mixture of 1-(2-hydroxyethyl)-4-methylpiperazine (1.0 g, 6.9 mmol) and tetrahydrofuran (15 ml) was added sodium hydride (60percent, 277 mg, 6.9 mmol) at 0¡ãC (external temperature), and the reaction mixture was stirred at room temperature for 30 minutes. Then, to the reaction mixture was added dropwise a mixture of tributyl-iodomethyl-tin (2.0 g, 4.6 mmol) and N,N-dimethylformamide (15 ml) at 0¡ãC (external temperature). Then, the reaction mixture was stirred at room temperature for 1. 5 hours. To the reaction mixture were added water and ethyl acetate, and the organic layer was separated. The organic layer was washed with water and an aqueous saturated sodium chloride solution, and dried over anhydrous magnesium sulfate. The solvent was distilled off under reduced pressure. The residue was purified by silica gel column chromatography (heptane: ethyl acetate=10:1, NH silica gel) to obtain the title compound (1.9 g, 4.2 mmol, 92percent). 1H-NMR Spectrum (CDCl3) delta (ppm): 0.89(15H, t, J=7.6Hz), 1. 25-1. 34 (6H, m), 1.46-1. 54 (6H, m), 2.28 (3H, s), 2.46 (8H, brs), 2.56(2H, t, J=5.6Hz), 3.47(2H, t, J=5.6Hz), 3.73(2H, s).

As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

Reference£º
Patent; Eisai R&D Management Co., Ltd.; EP1867650; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5464-12-0,1-(2-Hydroxyethyl)-4-methylpiperazine,as a common compound, the synthetic route is as follows.

50 ml of THF and 5 g (0.153 mol) of 1- hydroxyethylpiperazine are placed in a 500 ml three-necked flask equipped with a thermometer, a condenser and a bubbler, with magnetic stirring and under a stream of nitrogen. After cooling to 0¡ãC, 1.539 g (0.064 mol) of sodium hydride are added and this medium is stirred for 1 hour to obtain the alkoxide. A solution derived from 250 ml of THF and 4.3 g (0.028 mol) of 3-fluoro-4-nitroaniline is added dropwise to this alkoxide. The medium obtained is stirred for 24 hours while monitoring by TLC (9/1 CH2Cl2/MeOH). The solvent is removed by evaporation on a rotavapor, followed by purification on a column of silica, eluting with dichloromethane/methanol. The compound thus obtained in the form of a yellow powder, in a mass of 9.3 g, corresponds to the expected compound. Analysis by mass spectrometry confirms the structure of the expected compound. The quasi-molecular ions [M+H]+ and [M+Na] + of the expected molecule C13H20N4O3 are mainly detected.

5464-12-0, As the paragraph descriping shows that 5464-12-0 is playing an increasingly important role.

Reference£º
Patent; L’OREAL; FADLI, Aziz; WO2013/87934; (2013); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5464-12-0, 1-(2-Hydroxyethyl)-4-methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5464-12-0, General procedure: The mixture of mollugin (0.35 mmol), alcohol (3.52 mmol), and catalytic p-TsOH (0.035 mmol) in2 mL microwave vial was placed in the cavity of microwave reactor, and then stirred for 3 h at 160 ¡ãC.The produced brown mixture was dried under vacuum and subjected to purification (20 g silica gelcartridge, dichloromethane-MeOH) to give the title product.

The synthetic route of 5464-12-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Hong, Ki Bum; Kim, Darong; Kim, Bo-Kyung; Woo, Seo Yeon; Lee, Ji Hoon; Han, Seung-Hee; Bae, Gyu-Un; Kang, Soosung; Molecules; vol. 23; 8; (2018);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics