Category: 5308-25-8

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substituted piperazines (0.9819mmol) in dry DMF (4mL), triethylamine (0.27mL, 1.9638mmol) and potassium iodide (16.29mg, 0.0981mmol) were added at RT under N2 atmosphere. Compound 2 (0.4g, 0.9819mmol) was added to the above reaction mixture and resultant mixture was heated at 125C. After the reaction was complete, as indicated by TLC, DMF was evaporated in vacuo. The obtained residue was diluted with 20mL of water. The compound was extracted with CH2Cl2 (3×5mL). The organic layers were collected, washed with saturated brine solution, dried over anhydrous MgSO4 and concentrated in vacuo. The resultant crude was purified by column chromatography [CH2Cl2/MeOH (1-10%)] to get the title compounds.

5308-25-8, As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Suresh, Narva; Nagesh, Hunsur Nagendra; Renuka, Janupally; Rajput, Vikrant; Sharma, Rashmi; Khan, Inshad Ali; Kondapalli Venkata Gowri, Chandra Sekhar; European Journal of Medicinal Chemistry; vol. 71; (2014); p. 324 – 332;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5308-25-8, 1-(Bromomethyl)-4-nitro-2-(trifluoromethyl)benzene (34 g, 120 mmol) obtained in Step (1) above was stirred in a solvent of dichloromethane (300 mL). The reaction solution was added with 1-ethylpiperazine (15.97 mL, 126 mmol) and DIPEA (27.2 mL, 156 mmol), followed by stirring for about 3 hours at room temperature. The reaction mixture was diluted with dichloromethane, washed with a saturated aqueous sodium bicarbonate solution and saline. The organic layer thus obtained was dried over anhydrous sodium sulfate, filtered, and concentrated under reduced pressure to obtain the title compound (21.7 g, 57%). 1H-NMR Spectrum (300 MHz, DMSO-d6): delta 8.52 (d, 1H), 8.40 (s, 1H), 8.09 (d, 1H), 3.71 (s, 2H), 2.35 (m, 10H), 1.00 (t, 3H). MS (ESI+, m/z): 318 [M+H]+

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Patent; HANMI PHARM. CO., LTD.; Bae, In Hwan; Han, Sang Mi; Kwak, Eun Joo; Ahn, Young Gil; Suh, Kwee Hyun; US2015/191450; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5308-25-8, To a solution of 1-ethylpiperazine (1 g, 8.771 mmol, 1.0 eq) in DMF were added K2CO3 (3 g, 21.927 mmol, 2.5 eq.) and ethyl 2-bromoacetate (2.19 g, 13.156 mmol, 1.5 eq.). The mixture was stirred at RT for 16 h. The mixture was quenched and extracted as in Intermediate Example 5(a). The solvent was distilled off to afford the product in 76.4% yield (1.3 g).

The synthetic route of 5308-25-8 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Linnanen, Tero; Wohlfahrt, Gerd; Nanduri, Srinivas; Ujjinamatada, Ravi; Rajagopalan, Srinivasan; Mukherjee, Subhendu; US2015/11548; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 4 Preparation of 1-ethyl-4-(6-nitropyridin-3-yl)piperazine A mixture of 5-bromo-2-nitropyridine (1.02 g, 5.02 mmol) and 1-ethylpiperazine (1.71 g, 15.0 mmol) in N-methyl-2-pyrrolidinone (5 mL) was stirred at 120 C. for 3 h. After this time, the reaction was cooled to room temperature, poured into water (100 mL) and extracted with methylene chloride (2*100 mL). The combined organic layers were dried over sodium sulfate, filtered and the filtrate concentrated under reduced pressure. The resulting residue was purified by chromatography (silica, gradient, 1:49 methanol/methylene chloride to 1:9 methanol/methylene chloride) to afford 1-ethyl-4-(6-nitropyridin-3-yl)piperazine as a yellow solid: 1H NMR (400 MHz, DMSO-d6.) d 8.25 (d, J=2.8 Hz, 1H), 8.14 (d, J=9.2 Hz, 1H), 7.48 (dd, J=9.2, 2.8 Hz, 1H), 3.50-3.46 (m, 4H), 2.50-2.38 (m, 4H, merged with DMSO peak), 2.37 (q, J=7.2 Hz, 2H), 1.02 (t, J=7.2 Hz, 3H)., 5308-25-8

The synthetic route of 5308-25-8 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Gilead Connecticut, Inc.; Blomgren, Peter A.; Currie, Kevin S.; Kropf, Jeffrey E.; Lee, Seung H.; Mitchell, Scott A.; Schmitt, Aaron C.; Xu, Jianjun; Zhao, Zhongdong; US2014/148430; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5308-25-8

An amount of 120 mg (0.26 mmol) of 4-(4-chlorobutyl)-9-(2,4-dichloroanilino)-3,4-dihydro-2H-[1,4]oxazino[2,3-g]quinoline-8-carbonitrile was stirred in N,N-dimethylformamide (0.8 mL), and to this were added sodium iodide (55 mg, 0.36 mmol), tetrabutylammonium iodide (58 mg, 0.16 mmol), and 1-ethylpiperazine (0.26 mL, 2.1 mmol). The mixture was heated at 50C for three hours, after which an additional amount of 1-ethylpiperazine (0.26 mL, 2.1 mmol), was added. The mixture was heated at 60C for 3 hours, and subsequently evaporated to a yellow oil, stirred with saturated sodium bicarbonate solution, and extracted with dichloromethane. The organic layer was washed with saturated brine solution, dried over sodium sulfate, and evaporated to a yellow oil. Purification was performed by flash chromatography (10% acetone in dichloromethane, then 70:30:5 = dichloromethane: methanol: ammonium hydroxide), to give a yellow solid (74 mg, 53% yield), m.p 97-98C;1H NMR (DMSO-d6) delta 9.21 (s, 1H), 8.27 (s, 1H), 7.73 (d, 1H), 7.68 (s, 1H), 7.42 (dd, 2H), 6.70 (s, 1H), 4.27 (t, 2H), 3.49 (m, 4H), 2.31 (m, 12H), 1.62 (dd, J = 7 Hz, 2H), 1.52 (dd, J = 7 Hz, 2H), 0.97 (t, 3H); [] Analysis for C28H32Cl2N6O·0.3 CH3CO2C2H5 ·1 H2O FoundC, 60.29;H, 5.94;N, 14.76.CalcdC, 60.00;H, 6.23;N, 14.38.

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Patent; Wyeth; EP1268487; (2003); B1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

0.55 mmol of N-(5-piperon-4-tert-butylthiazol-2-yl)chloroacetamide, 0.83 mmol 1-ethylpiperazine, 0.8mmol triethylamine, Dissolved in 10 mL of tetrahydrofuran, Stir at room temperature for 12h The reaction solution was diluted with 50 mL of ethyl acetate. Wash once, Wash with saturated saline, Anhydrous Na2SO4 drying, Decompression distillation, Add a few drops of petroleum ether, Precipitation of solids, Suction filtration dry, In a white solid, 0.22 g of N-(5-piperon-4-tert-butylthiazol-2-yl)-2-(4-ethylpiperazinyl)acetamide was obtained. Yield 90%, 5308-25-8

5308-25-8 1-Ethylpiperazine 79196, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Hunan University; Hu Aixi; Wu Zhilin; Ding Na; Ye Jiao; (20 pag.)CN107365280; (2017); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 1-ethylpiperazine (3.23 g, 0.0283 mol) and l-fluoro-3 -nitrobenzene (2.0 g, 0.0142 mol) was heated at reflux for 2 days. The resulting mixture was cooled and concentrated in vacuo. The residue was poured into water (50 mL), extracted with EA (2*50 mL). The combined extracts were washed with brine, concentrated in vacuo. The residue was purified via ISCO (eluted with EA in PE 0 – 70%) to give a yellow solid (1.80 g, 54.0% yield). MS (m/z): 236.1 (M+H)+., 5308-25-8

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Patent; HUTCHISON MEDIPHARMA LIMITED; SU, Wei-Guo; ZHANG, Weihan; LI, Jinshui; WO2014/139465; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Into a solution of l-Methyl-4-nitro-2-trifluoromethyl-benzene (1; 15 g, 73 mmol, 1.0 eq.) in carbon tetrachloride (250 ml) are added NBS (13 g, 98 ml, 73 mmol, 1.0 eq.) and AIBN (1.19 g, 7.3 mmol, 0.1 eq.) as an initiator. The reaction is refiuxed overnight and then partitioned with water. The organic layer is separated and the aqueous layer is extracted with dichloromethane. The combined organic extracts are washed with water, dried over EPO Na2SO4, filtered and concentrated to afford the solids. The solids are dissolved in dichloromethane (300 ml). The clear solution is treated with DIEA (12.55 ml, 73 mmol, 1.0 eq.) and N-Ethylpiperazine (8.25 g, 73 mmol, 1.0 eq.). The reaction mixture is stirred at room temperature for 30 minutes (until the completion of reaction as per LCMS). The reaction mixture is washed with water, dried over Na2SO4, filtered and concentrated to afford the crude product. The crude product is purified by flash column chromatography using 1 :1 v/v hexanes: ethyl acetate as solvent to afford title compound 2 as a solid., 5308-25-8

5308-25-8 1-Ethylpiperazine 79196, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; IRM, LLC; WO2006/124462; (2006); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5308-25-8, General procedure: A mixture of 4-fluoro benzaldehyde (0.259 mL, 0.002 mol), corresponding phenol, thiophenol,or amine (0.002 mol), and a catalytic quantity of potassium carbonate (K2CO3) was refluxed in DMF(20 mL) for 36 h. After completion of the reaction, the mixture was poured into ice water (50 mL),and the precipitated product was filtered, washed with deionized water, dried, and recrystallizedfrom ethanol.

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Osmaniye, Derya; Avu?o Glu, Bet l Kaya; Sa gl?k, Beg m Nurpelin; Levent, Serkan; Acar evik, Ulviye; Atl?, Zlem; Zkay, Yusuf; Kaplanc?kl?, Zafer As?m; Molecules; vol. 23; 4; (2018);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5308-25-8, General procedure: A mixture of 4-fluoro benzaldehyde (0.259 mL, 0.002 mol), corresponding phenol, thiophenol,or amine (0.002 mol), and a catalytic quantity of potassium carbonate (K2CO3) was refluxed in DMF(20 mL) for 36 h. After completion of the reaction, the mixture was poured into ice water (50 mL),and the precipitated product was filtered, washed with deionized water, dried, and recrystallizedfrom ethanol.

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Osmaniye, Derya; Avu?o Glu, Bet l Kaya; Sa gl?k, Beg m Nurpelin; Levent, Serkan; Acar evik, Ulviye; Atl?, Zlem; Zkay, Yusuf; Kaplanc?kl?, Zafer As?m; Molecules; vol. 23; 4; (2018);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics