New learning discoveries about 192130-34-0

192130-34-0, 192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 4-N-(2-aminoethyl)1-N-Boc-piperazine (2.06 g, 8.99 mmol) in CH2CI2 was added triethylamine (2.5 ml_, 17.9 mmol) and 2,4- dichlorobenzenesulfonyl chloride (2.65 g, 10.8 mmol). The reaction mixture was stirred at room temperature for 4 days. The reaction was then concentrated in vacuo and purified by column chromatography (10-70percent ethyl acetate:hexane) to produce 3.46 g (88percent) of the title compound as a white solid: LCMS (m/z): 438.0/440.0 I(M/M+2)+H].

192130-34-0, 192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/70865; (2007); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A mixture of 2- (5-amino-2- (furan-2-yl) -7H-pyrazolo [4, 3-e] [1, 2, 4] triazolo [1, 5-c] pyrimidin-7-yl) -2-phenylpropanoic acid (60 mg, 0.154 mmol) , the product of Step B (35.3 mg, 0.154 mmol) , HATU (70.6 mg, 0.18 mmol) and DIPEA (40 mg, 0.308 mmol) in DMF (3 mL) was stirred overnight. The reaction mixture was poured into H 2O (15 mL) and extracted with EtOAc (10 mL x 3) . The combined organic layers were washed with brine, dried over Na 2SO 4, concentrated and purified by prep-TLC (petroleum ether/EtOAc=1: 2) to give the target compound (34 mg, 36.8%) as a white solid. MS: M/e 601 (M+1) +., 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference£º
Patent; BEIGENE, LTD.; ZHANG, Guoliang; ZHOU, Changyou; (152 pag.)WO2019/196803; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

The mixture of 4-(4-chloro-1,6-naphthyridin-2-yl)-N,N-diethylbenzamide (278 mg, 0.82 mmol), tert-butyl 4-(2-aminoethyl)piperazine-1-carboxylate (281 mg, 1.23 mmol) and K2C03 (226 mg, 1.64 mmol) in DMF (1 mL) was heated at 100¡ãC for l8hrs. The reaction mixture was poured into water (20 mL), extracted with EA (10 mL x 3). The combined organic layers were washed by water (10 mL x 3) and brine (10 mL), dried over Na2SO4. Filtered and the filtrate was concentrated under the reduced pressure to give the residue which was purified prep-TLC to afford tert-butyl 4-(2-(2-(4- (diethylcarbamoyl)phenyl)- 1 ,6-naphthyndin-4-ylamino)ethyl)piperazine- 1 -carboxylate (90 mg, 20percent). LC-MS (ESI): 533.3(M + 1)., 192130-34-0

As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference£º
Patent; SANFORD BURNHAM PREBYS MEDICAL DISCOVERY INSTITUTE; PINKERTON, Anthony B.; ARDECKY, Robert J.; ZOU, Jiwen; (256 pag.)WO2018/204176; (2018); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 192130-34-0

192130-34-0, The synthetic route of 192130-34-0 has been constantly updated, and we look forward to future research findings.

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(i) tert-Butyl 4-(2-(5-(tert-butyl)-2-methoxy-3-(3-(4-((2-(phenylamino)pyridin-4-yl)oxy)- naphthalen-1-yl)ureido)benzamido)ethyl)piperazine-1-carboxylateA stirred mixture of 5-(tert-butyl)-2-methoxy-3-(3-(4-((2-(phenylamino)pyridin-4- yl)oxy)naphthalen-1-yl)ureido)benzoic acid, HCI (see Example 14(iii) above; 80 mg, 0.130 mmol), tert-butyl 4-(2-aminoethyl)piperazine-1-carboxylate (59.8 mg, 0.261 mmol) and triethylamine (72.7 muIota_, 0.522 mmol) in DCM (4 mL) was cooled in an ice-bath. 50 wtpercent T3P in EtOAc (93 muIota_, 0.157 mmol) was added, the ice-bath was removed and the reaction mixture allowed to warm to rt and stirred for 36 h. The reaction mixture was partitioned between sat. aq. NaHCC>3 (10 mL) and DCM (10 mL). The aqueous phase was back extracted with fresh DCM (10 mL). The combined organic extracts were washed with water (20 mL), brine (20 mL), dried (MgSC ), filtered and concentrated in vacuo onto silica gel. The crude product was purified by chromatography on the Companion (12 g column, 1-5percent MeOH in DCM) to afford the sub-title compound (52 mg) as a pink/brown solid.LCMS m/z 788 (M+H)+(ES+); 786 (M-H)”(ES”)

192130-34-0, The synthetic route of 192130-34-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; RESPIVERT LIMITED; TOPIVERT PHARMA LIMITED; FYFE, Matthew Colin Thor; THOM, Stephen Malcolm; BAKER, Thomas Matthew; HARBOTTLE, Gareth William; HASIMBEGOVIC, Vedran; RIGBY, Aaron; WO2015/92423; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 192130-34-0

The synthetic route of 192130-34-0 has been constantly updated, and we look forward to future research findings.

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A microwave vial was charged with 4-(4-benzylphenylamino)-6-fluoro-1 ,7- naphthyridine-3-carbonitrile (0.100 g, 0.282 mmol), 1-N-BOC-4-(2- aminoethyl)piperazine and 2 mL THF, crimp-sealed, and heated in a microwave reactor at 180 0C for 35 minutes, until TLC analysis (5percent MeOH in CH2CI2) showed disappearance of the 6-fluoronaphthyridine. This process was repeated with 3 additional aliquots of the fluoronaphthyridine (0.12O g, 0.100 g, 0.10O g), and the contents of all 4 vials were then combined, partitioned between 50 mL each EtOAc and brine, and worked up as described above for the synthesis of WAY-191220. The crude product was purified by flash chromatography over silica gel (5percent MeOH in CH2CI2) and lyophilized to give pure 4-(4-benzylphenylamino)-6-(2-(1 -N-BOC- piperazin-4-yl)ethylamino)-1 ,7-naphthyridine-3-carbonitrile (0.151 g, 23percent yield): 1H NMR (400 MHz, DMSO-D6) t 1.39 (s, 9 H) 2.34 – 2.44 (m, 4 H) 2.57 (t, J=6.6 Hz, 2 H) 3.21 – 3.42 (m, 6 H) 3.99 (s, 2 H) 6.59 (t, J=5.3 Hz, 1 H) 7.03 (s, 1 H) 7.14 – 7.34 (m, 9 H) 8.22 (s, 1 H) 8.81 (s, 1 H) 9.56 (s, 1 H)., 192130-34-0

The synthetic route of 192130-34-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; WYETH; WO2006/124944; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 192130-34-0

192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

192130-34-0, Method B. (i) In a 100 mL three-neck round-bottom flask was charged 2-chloronicotinic acid 1 (0.3151 g, 2.0 mmol), HOBt (0.4054 g, 3.0 mmol), and EDAC (0.5751 g, 3.0 mmol) were dissolved in CH 2 Cl 2 (10 mL). After stirring for 10 min, 4-(2-aminoethyl)-1-boc-piperazine (0.4586 mL, 2.0 mmol) was added followed by Et 3 N (0.5733 mL, 4.0 mmol) and the reaction mixture stirred at room temperature for 16 h. After completion of the reaction, the solution was washed with water (30 mL), and the product was extracted with CH 2 Cl 2 (3 X 20 mL). The combined organic phases were washed with brine, and dried over anhydrous Na 2 SO 4 , filtered, and concentrated under reduced pressure. The concentrated crude oil tert-butyl 4-(2-(2-chloronicotinamido)ethyl)piperazine-1-carboxylate intermediate was obtained (0.63 g, 1.71 mmol, 86%). The product was used in the next step without further purification. Step (ii) In a 100 mL three neck round bottom flask equipped with a stirring bar and reflux condenser, tert-butyl 4-(2-(2 chloronicotinamido)ethyl)piperazine-1-carboxylate (0.630 g, 1.71 mmol) and 9-ethyl-9H-carbazol-3-amine (0.0361 g, 1.72 mmol) were dissolved in 5 mL of DMSO. To the solution, CuI (0.0651 g, 0.3 mmol) and Cs 2 CO 3 (1.11 g, 3.42 mmol) were added and heated at 90 C for 24 hr. After the reaction was complete (analyzed by TLC), the mixture was allowed to reach room temperature. The mixture was washed with water (30 mL), and extracted with CH 2 Cl 2 (3 X 30 mL). The combined organic phases were washed with brine and dried over anhydrous Na 2 SO 4 , filtered, and concentrated under reduced pressure. The crude oil was purified via column chromatography over silica gel and the product 4b was obtained as a white solid (0.08g, 0.15 mmol, 9%). TLC analysis in CH 2 Cl 2 -MeOH (9:1), R f =0.44. 1 H NMR (400 MHz, CDCl 3 ) delta 1.26 (4H, t, J = 7.1 Hz), 1.42 (3H, t, J = 7.3 Hz), 1.46 (9H, s), 1.65 (3H, s), 2.04 (2H, s), 2.48 (3H, t, J = 4.6 Hz), 2.65 (2H, t, J = 5.9 Hz), 3.47 (4H, t, J = 5.3 Hz), 3.56 (2H, q, J = 5.6 Hz), 4.11 (1H, q, J = 7.1 Hz), 4.34 (2H, q, J = 7.6 Hz) 6.64(1H, q, J = 4.8 Hz), 7.19 (1H, t, J = 6.3 Hz), 7.26 (1H, s,), 7.35 (1H, d, J = 4.3 Hz), 7.39 (1H, d, J = 3.8 Hz), 7.43 (1H, t, J = 7.6 Hz), 7.65 (1H, d, J = 1.8 Hz), 7.67 (1H, t, J = 2.3 Hz), 7.69 (1H, d, J = 2.0 Hz), 8.08 (1H, d, 7.6 Hz), 8.31 (1H, d, J = 1.5 Hz), 8.32 (1H, d, J = 1.8 Hz), 8.33 (1H, d, J = 2.0 Hz), 10.40 (1H, s); 13 C NMR (100 MHz, CDCl 3 ) delta 13.8, 37.5, 42.2, 44.8, 45.5, 66.6, 108.3, 112.8, 115.3, 118.3, 120.5, 120.7, 122.8, 123.2, 125.4, 131.6, 132.8, 136.5, 132.0, 140.3, 147.6, 167.8. GC-MS m/z (rel%): [M] 542 (0.01), [M-C 17 H 19 N 3 O] 281 (67.5), [M-C 12 H 23 N 3 O 3 ] 257 (2.6), [M-C 11 H 17 N 3 O] 207 (100).

192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

Reference£º
Article; Vlaar, Cornelis P.; Castillo-Pichardo, Linette; Medina, Julia I.; Marrero-Serra, Cathyria M.; Velez, Ericka; Ramos, Zulma; Hernandez, Eliud; Bioorganic and Medicinal Chemistry; vol. 26; 4; (2018); p. 884 – 890;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

New learning discoveries about 192130-34-0

192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

192130-34-0, General procedure: A suspension oftert-butyl 4-((1R,3aS,5aR,5bR,7aR,11aS,11bR,13aR,13bR)-3a-formyl-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)-2,3,3a,4,5,5a,5b,6,7,7a,8,11,11a,11b,12,13,13a,13b-octadecahydro-1H-cyclopenta[a]chrysen-9-yl)benzoate5(1 eq.), the corresponding amine (2 eq.) and acetic acid (2 – 5 eq.) in DCE (2 ml) was stirred at RT for 30 min.To this suspension was added sodium triacetoxyborohydride (5 eq.).The resulted mixture was stirred at RT for 18 – 72 hrs.The reaction mixture was diluted with 5 ml of saturated sodium carbonate and extracted with DCM (3 x 10 ml).The combined organic layers were dried over sodium sulfate, filtered and concentratedinvacuo.The crude product was purified by Biotage flash chromatography or was used directly in the next step without further purification.

192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

Reference£º
Article; Chen, Yan; Sit, Sing-Yuen; Chen, Jie; Swidorski, Jacob J.; Liu, Zheng; Sin, Ny; Venables, Brian L.; Parker, Dawn D.; Nowicka-Sans, Beata; Lin, Zeyu; Li, Zhufang; Terry, Brian J.; Protack, Tricia; Rahematpura, Sandhya; Hanumegowda, Umesh; Jenkins, Susan; Krystal, Mark; Dicker, Ira D.; Meanwell, Nicholas A.; Regueiro-Ren, Alicia; Bioorganic and Medicinal Chemistry Letters; vol. 28; 9; (2018); p. 1550 – 1557;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 192130-34-0

192130-34-0, As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A vial was charged with palladium (II) acetate (0.012 g, 0.054 mmol) and 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (0.034 g, 0.054 mmol). Toluene (1.0 mL) was added and the system was flushed with argon. The vial was capped and the mixture stirred at room temperature for 15 min. A resealable tube was charged with 4-(4-chloro-3-phenyl-furo[2,3-b]pyridin-2-yl)-phenol (6) (0.174 g, 0.541 mmol), 4-N-(tert-butoxycarbonyl)-1-aminoethylpiperazine (0.248 g, 1.08 mmol), and potassium carbonate (1.495 g, 10.82 mmol). The Pd/BINAP solution was added along with 1.0 mL of toluene, and the system was flushed with argon. The tube was sealed and the mixture stirred at 130 C. for 15 h. The reaction mixture was partitioned between ethyl acetate and saturated aqueous sodium bicarbonate solution. The aqueous phase was separated and extracted with ethyl acetate. The combined organic phases were washed with saturated aqueous sodium chloride solution, dried over anhydrous sodium sulfate, filtered and concentrated to afford a brown solid. This material was purified via column chromatography on silica gel (eluting with 0-50% (90:10:1, dichloromethane/methanol/ammonium hydroxide)-dichloromethane) to afford 4-{2-[2-(4-hydroxy-phenyl)-3-phenyl-furo[2,3-b]pyridin-4-ylamino]-ethyl}-piperazine-1-carboxylic acid tert-butyl ester 7a as a tan solid. MS (MH+) 515.2; Calculated 514 for C30H34N4O4.

192130-34-0, As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference£º
Patent; Nunes, Joseph J.; Martin, Matthew W.; White, Ryan; McGowan, David; Bemis, Jean E.; Kayser, Frank; Fu, Jiasheng; Liu, Jinqian; Jiao, Xian Yun; US2006/46977; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 192130-34-0

192130-34-0, As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

192130-34-0, tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 69 (0.2 g, 0.57 mmol), 4-(2-amino-ethyl)-piperazine-l-carboxylic acidtert-butyl ester (0.26 g, 1.13 mmol) and DIEA (0.20 mL, 1.14 mmol) in 1-butanol (5 mL) washeated to 120¡ãC for 1.5 h. After concentration, the residue was purified by silica gelchromatography using 2-5percent MeOH/DCM, to give 4-[2-(5,6-diphenyl-furo[2,3-d]pyrimidin-4-ylamino)-ethyl]-piperazine-l-carboxylic acid tert-butyl ester 71 (0.20 g). Compound 71 wassubjected to 20 mL of 20percent TFA/DCM at rt for 2 h, then the reaction was concentrated almostto dryness under reduced pressure, and purified by silica gel column chromatography using0.1percent MeOH/DCM containing ImL ammonium hydroxide, to give 72 (0.15 g). MS: 400.2(M+l). ‘HNMRtDMSO-dg) ppm 8.36 (s, 1H), 7.61-7.33 (m, 10H), 5.49 (t, 1H, J=4.48Hz),3.45 (dd, 2H, Jr=5.10Hz, J2=5.84Hz), 2.33 (t, 2H, J=5.80Hz), 2.13 (br, 4H), 1.95 (br, 1H)(note: some peaks overlapped with water peak in DMSO-de). ‘HNMR (CCla-d) ppm 8.43 (s,1H), 7.60-7.50 (m, 6H), 7.50-7.26 (m, 4H), 5.39 (t, 1H), 3.54 (dd, 2H, J^S.OSHz, J2=6.20Hz),2.73 (t, 4H, J=4.71Hz), 2.44 (t 2H, J=5.91Hz), 2.28 (br, 4H), 1,87 (br, 1H).

192130-34-0, As the paragraph descriping shows that 192130-34-0 is playing an increasingly important role.

Reference£º
Patent; AMGEN INC.; WO2006/4658; (2006); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 192130-34-0

192130-34-0, 192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.192130-34-0,tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

To a mixture of 6j (0.812 g, 1.86 mmol, 1.0 equiv) in n-BuOH (30 mL) was added tert-butyl-4-(2-aminoethyl)piperazine-1-carboxylate (2.80 g, 13.0 mmol, 7.0 equiv). After heating at 100¡ã C. for 24 hrs, the solvent was removed in vacuo. The resulting residue was purified by silica gel chromatography (5percent MeOH:CH2C12) to afford carbamate 8c. MS (MH+) 630.1; Calculated 629.3 for C38H39N5O4.

192130-34-0, 192130-34-0 tert-Butyl 4-(2-aminoethyl)piperazine-1-carboxylate 1514400, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Nunes, Joseph J.; Martin, Matthew W.; White, Ryan; McGowan, David; Bemis, Jean E.; Kayser, Frank; Fu, Jiasheng; Liu, Jinqian; Jiao, Xian Yun; US2006/46977; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics