Month: September 2021

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.76003-29-7,1-Boc-3-Oxopiperazine,as a common compound, the synthetic route is as follows.,76003-29-7

NaH (60 % in mineral oil) (0.24 g; 5.99mmol) was added to a solution of Int. 177 (1 g; 4.99 mmol) in DMF (8 ml) and cooled to 0 C under N2-gas atmosphere. The mixture was stirred at this temperature for 10 min. Methyl bromoacetate (0.522 mL; 5.49 mmol) was added. The cooling bath was removed and the reaction stirred overnight. Subsequently, the reaction was quenched with H20 (2 ml ). A saturated NaCl aqueous solution (20 ml) was added and the mixture was extracted with EtOAc (14 ml ). The organic layer was dried over MgS04, filtered and concentrated to dryness. The residue was purified by chromatography over silica gel eluting with a gradient from 100 % DCM to 40 % DCM and 60 % DCM/MeOH 9/1, v/v. The desired fractions were collected and the solvent was evaporated. Yield: 1.14 g of Int. 178 (84 %).

As the paragraph descriping shows that 76003-29-7 is playing an increasingly important role.

Reference：
Patent; JANSSEN PHARMACEUTICA NV; DIELS, Gaston, Stanislas, Marcella; SCHOENTJES, Bruno; VERSELE, Matthias, Luc, Aime; BERTHELOT, Didier, Jean-Claude; WILLEMS, Marc; VIELLEVOYE, Marcel; EMBRECHTS, Werner, Constant, Johan; WROBLOWSKI, Berthold; MEERPOEL, Lieven; WO2015/150555; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

57260-71-6, tert-Butyl piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

57260-71-6, EXAMPLE 9 Reaction of equimolar amounts of 4-cyanobenzyl bromide, BOC-piperazine and triethylamine in dichloromethane gives 1-(4-cyanobenzyl)-4-(tert-butyloxycarbonyl)piperazine. Reaction with

57260-71-6 tert-Butyl piperazine-1-carboxylate 143452, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Merck Patent GmbH; US6492368; (2002); B1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.30459-17-7,1-(4-Trifluoromethylphenyl)piperazine,as a common compound, the synthetic route is as follows.

General procedure: Arylpiperazines (1.2 equiv) and potassium carbonate (4.0 equiv)were added to a solution of 2 (100 mg, 0.43 mmol) in acetonitrile(CH3CN, 15 mL). The reaction mixture was heated to 85 C and stirred for 16 h. Afterward the mixture was cooled to room temperature. The reaction mixture was filtered, and the filtrate was concentrated invacuo. Then the residue was purified by chromatography on silica-gel column (petroleum ether: ethyl acetate=3:1, v/v) to obtain the corresponding products (3-24).

30459-17-7, 30459-17-7 1-(4-Trifluoromethylphenyl)piperazine 121718, apiperazines compound, is more and more widely used in various fields.

Reference：
Article; Chen, Hong; Zhang, Jingxiao; Hu, Peixin; Qian, Yuna; Li, Jing; Shen, Jianliang; Bioorganic and Medicinal Chemistry; vol. 27; 20; (2019);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.78818-15-2,Benzyl 3-oxopiperazine-1-carboxylate,as a common compound, the synthetic route is as follows.,78818-15-2

Preparation 57; 4-{5-[4-(2-Methoxy-(1S)-methyl-ethoxy)-phenyl]-[1,3,4]oxadiazol-2-ylmethyl}-3- oxo-piperazine-1-carboxvlic acid benzyl ester; A solution of potassium carbonate (136mg, 2. 4mmol) suspended in tetrahydrofuran (3mL) was cooled to 0C. Tetrabutylammonium bromide (130mg, 0. 40mol), 4-benzyloxycarbonyl piperazin-2-one (568mg, 2. 43mmol), and the product of preparation 48 (572mg, 2. 02mmol), were added in tetrahydrofuran (3mL) and the mixture was allowed to warm to room temperature and stir for 18 hours. The solvent was then evaporated under reduced pressure and the residue was dissolved in ethyl acetate and washed with water and brine. The organic phase was dried over magnesium sulfate and concentrated in vacuo to give an oil. Purification by column chromatography on silica gel, eluting with pentane: diethyl ether 90: 10 to 20: 80, gave the title compound as a pale brown foam in 70% yield, (679mg). ‘H NMR (CDCI3, 400MHz) d : 1.40 (d, 3H), 3.40 (s, 3H), 3.50 (m, 1H), 3.55 (t, 2H), 3.60 (m, 1H), 3.80 (t, 2H), 4.15 (s, 2H), 4.64 (m, 1H), 4.90 (s, 2H), 5.15 (s, 2H), 7.00 (d, 2H), 7.40 (m, 5H), 7.95 (d, 2H). MS APCI+ m/z 481 [MH] +

78818-15-2 Benzyl 3-oxopiperazine-1-carboxylate 736777, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; PFIZER LIMITED; PFIZER INC.; WO2005/82866; (2005); A2;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13754-38-6,1-Benzoylpiperazine,as a common compound, the synthetic route is as follows.

General procedure: A solution of 2-chloroalkyl/aryl substitutedwith or without N-substitution as well as with or without 5 and/or 6-substituted benzimidazole derivative (1.75g,0.01051mol) and 1-[(4-phenyl)carbonyl]piperazine (3g,0.0105mol) in N, N dimethylformamide was taken in a RBF.K2CO3(2gm,) was added to the reaction mixture. The reaction mixture was stirred for 8h at 80C on a magnetic stirrer (heat + stirring). The progress of the reaction was monitored by thin layer chromatography (TLC).Upon completion of the reaction, water was added to the reaction mixture and the product extracted by shaking the reaction mixture with dichloromethane in a separating funnel.The dichloromethane layer was washed successively with water and brine, dried over anhydrous sodium sulfate. Evaporation of the solvent gave theproduct. 11a-l Recrystallized with various solvent like chloroform, ethanol, methanol.

13754-38-6, 13754-38-6 1-Benzoylpiperazine 762654, apiperazines compound, is more and more widely used in various fields.

Reference：
Article; Kankate, Rani S.; Gide, Parag S.; Belsare, Deepak P.; Oriental Journal of Chemistry; vol. 30; 4; (2014); p. 1855 – 1863;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

304897-49-2, tert-Butyl 4-(4-aminobenzyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0328] A mixture of intermediate 31 (0.10 g, 0.35 mmol), 4-(4-amino-benzyl)-piperazine- 1-carboxylic acid tert-butyl ester (0.12 g, 0.41 mmol), Pd2(dba)3 (30 mg, 0.033 mmol), Xantphos (35 mg, 0.06 mmol) and cesium carbonate (0.23 g, 0.71 mmol) in dioxane/DMF (3/1, 4 mL) was sealed in a microwave reaction tube and irradiated with microwave at 160 0C for 20 min. After cooling to room temperature, the cap was removed and the resulting mixture filtered. The filtered solid was washed with DCM and the filtrate concentrated. The residue was purified by flash chromatography on silica gel (hexanes to 60% EtOAc/hexanes) to afford the Boc-protected precursor. To a solution of the precursor in DCM (5 mL) was added TFA (3 mL). The mixture was stirred at room temperature for 1 h, concentrated and the residue purified by HPLC. The corrected fractions were combined and poured into saturated NaHCO3 solution (30 mL). The combined aqueous layers were extracted with EtOAc (2 x 30 mL) and the combined organic layers washed with brine, dried over anhydrous Na2SO4 and filtered. The filtrate was concentrated and then taken up in minimum amount of EtOAc. Hexanes were added until solid precipitated. After filtration, the title compound was obtained as a white solid (13 mg, 9%).[0329] 1H NMR (500 MHz, DMSO-d6): delta 2.11 (s, 3H), 2.30-2.40 (m, 4H), 2.83 (t, J= 4.8 Hz5 4H), 3.37 (s, 2H), 3.75 (s, 3H), 7.08 (d, J= 8.6 Hz, 2H), 7.29 (d, J= 8.6 Hz, IH), 7.43 (dd, J= 8.6, 2.2 Hz, IH), 7.47 (d, J= 2.2 Hz, IH), 7.59 (d, J= 8.6 Hz, 2H), 7.91 (s, IH), 8.37 (s, IH), 8.99 (s, IH). MS (ES+): m/z 439 (M+H)+.

304897-49-2, As the paragraph descriping shows that 304897-49-2 is playing an increasingly important role.

Reference：
Patent; TARGEGEN, INC.; WO2007/53452; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21043-40-3,1-Cyclopentylpiperazine,as a common compound, the synthetic route is as follows.,21043-40-3

Example 1 (General procedure A); 6-Chloro-2-(4-cyclopentylpiperazin-1-yl)benzothiazole, hydrochloride; A mixture of 2,6-dichlorobenzothiazole (0.39 g, 1.9 mmol), 1-cyclopentylpiperazine (0.22 g, 1.4 mmol) and dimethylsulfoxide (2.0 ml.) was stirred at 130 0C for 23 h. The reaction mixture was allowed to cool and water (50 ml.) and potassium carbonate (1 g) was added. The resulting mixture was extracted with a mixture of ethyl acetate and dichloromethane and filtered. The filtrate was separated and the organic extract was washed with brine (2 x) and dried (MgSO4). The volatiles were evaporated to give a solid residue which was dissolved into a mixture of ethanol (30 ml.) and 1 N hydrochloric acid (2.5 ml_). Toluene was added and the mixture was concentrated. Ethanol and toluene was added and the mixture was concentrated again. This afforded a solid which was treated with ethanol (50 ml.) and heated to reflux temperature. The resulting mixture was left overnight for crystallization. This afforded after filtration and drying 0.35 g (69 %) of 6-chloro-2-(4-cyclopentylpiperazin-1-yl)benzo- thiazole, hydrochloride.

The synthetic route of 21043-40-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; NOVO NORDISK A/S; WO2007/110364; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5271-27-2, 1-Methyl-3-phenylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5271-27-2

General procedure: A mixture of 1a-c (1.93 g, 10 mmol), 4 (1.76 g, 10mmol) and KF (18 mmol) were heated at 120-130 °C inDMF (30 mL) for 16 – 18 h. At the end of this period, thereaction mixture was cooled to room temperature and dilutedwith water (30 mL). The separated solid was filtered, washedand dried to obtain crude 5a-i. The obtained crude productwas then purified by recrystallization using ethanol

5271-27-2 1-Methyl-3-phenylpiperazine 2760009, apiperazines compound, is more and more widely used in various fields.

Reference：
Article; Darsi, S.S. Praveen Kumar; Kumar, K. Shiva; Devi, B. Rama; Naidu; Dubey; Letters in Organic Chemistry; vol. 11; 8; (2014); p. 551 – 555;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

300543-56-0, (R)-1-((4-Chlorophenyl)(phenyl)methyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2 g of R-I- ( (4-chlorophenyl) (phenyl) methyl) piperazine and 0.88 g of diglycolic acid anhydride were dissolved in 10 ml of dimethylsulphoxide . To the solution 20 ml of tetrabutylammo- nium bromide were added. The solution was stirred for another 10 hours until the reaction was completed. The solution was diluted with 67 ml of water and 15 ml of isopropyl acetate were added. The phases were separated and the water layer was reextracted with isopropyl acetate. The organic layer was mixed with demineralised water (40 ml) and the pH of the suspension was adjusted to 10 with 2 M NaOH. The layers were separated and to the water phase 40 ml of isopropyl acetate were added. The pH of the suspension was adjusted to 3.5. The layers were separated and the water phase was reextracted twice with isopropylacetate . The organic phase was rinsed with water and evaporated to dryness. 2.5 g of product (HPLC (area) was 98.5 %) ) was crystallised. The product was dried at vacuum at 500C., 300543-56-0

As the paragraph descriping shows that 300543-56-0 is playing an increasingly important role.

Reference：
Patent; KRKA, tovarna zdravil, d.d., Novo Mesto; WO2009/150147; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

21655-48-1, cis-2,6-Dimethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

21655-48-1, EXAMPLE 24 Cis-3,5-dimethyl-1-(4-nitro-phenyl)-piperazine A suspension of 6.74 g (47.8 mmol) of 4-fluoro-nitro-benzene and 10.91 g (95.5 mmol) of cis-2,6-dimethyl-piperazine is heated at 45° C. for 1 hour. The reaction mixture is cooled and shaken with dichloromethane and water. The organic layer is dried (magnesium sulfate) and concentrated to give 11.62 g (>100percent) of the product as a solid.

21655-48-1 cis-2,6-Dimethylpiperazine 6950261, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Booth, Richard John; Dobrusin, Ellen Myra; Josyula, Vara Prasad Venkata Nagendra; McNamara, Dennis Joseph; Toogood, Peter Laurence; US2003/73668; (2003); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics