Month: June 2021

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.112984-60-8,6-Fluoro-1-methyl-4-oxo-7-(piperazin-1-yl)-1,4-dihydro-[1,3]thiazeto[3,2-a]quinoline-3-carboxylic acid,as a common compound, the synthetic route is as follows.

Example 1 Preparation of (S)-(-)-uliflourxacin; 105 g of racemic uliflourxacin was dissolved in 1,500 mL of dimethyl sulfoxide. 27 g of D-tartaric acid was dissolved in 405 mL of dimethyl sulfoxide dropwise while stirring. After stirring at room temperature for 20 hours, the precipitate was filtrated. The collected solid was dried under vacuum to obtain 86 g solid, which was recrystallized in dimethyl sulfoxide to obtain 37 g of levoulifloxacin-D-tartrate, with C49.08%, H5.06%, N9.50%, S7.44% shown by elemental analysis (molecular formula: C16H16FN3O3S·1/2C4H6O6·H2O, calculated values: C48.86%, H4.78, N9.50%, S7.25%). Said salt was added into water to obtain a suspension, and the pH value was adjusted to 7-8 with 2% NaOH aqueous solution while stirring. After precipitation, filtration, and drying, 24.5 g of (S)-uliflourxacin was obtained, having a chemical name (S)-(-)-6-fluoro-1-methyl-4-oxo-(1-piperazinyl)-1H,4H-[1,3]thiazeto [3,2-alpha]quinoline-3-carboxylic acid. Specific rotation [alpha]20D= -133 (c=0.5, 0.1 mol/L methanesulfonic acid); 1H-NMR (DMSO-d6) delta2.11 (3H, d, j=6.2 Hz), 2.87 (4H, m), 3.19 (4H, m), 6.40 (1H, q, j=6.2 Hz), 6.89 (1H, d, j=7.4Hz), 7.79 (1H, d, j=13.9Hz), optical purity e.e. 96%.

112984-60-8, 112984-60-8 6-Fluoro-1-methyl-4-oxo-7-(piperazin-1-yl)-1,4-dihydro-[1,3]thiazeto[3,2-a]quinoline-3-carboxylic acid 124225, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Hainan Hualon Pharmaceutical Co., Ltd.; EP2524922; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

103-76-4, N-(2-Hydroxyethyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

An electrically-heated, mechanically stirred 1 liter autoclave was fitted with an vent valve connected in turn to a condenser and receiver assembly, a bottom valve, a thermowell, a pressure gauge, an inlet line for feeding of reagents, and a pressure-relief valve. The receiver was placed on a balance to facilitate continuous determination of the amount of distillate collected in the receiver. The amine starting material, aqueous sodium 2-hydroxyethanesulfonate, and aqueous 50 percent sodium hydroxide were charged to the autoclave. With the isolation valve open, the reaction mixture was rapidly heated with stirring until condensate was detected in the condenser/receiver. The mixture was further heated with continuous removal of water until the targeted amount of distillate had been removed. An analysis of the collected aqueous distillate was performed by UV spectroscopy to determine the amount of amine which co-distilled with the water. The isolation valve was then closed and the reaction mixture further heated to a target temperature in the range of 140-200 C. for 2-17 hours as specified in Examples 1-8. The reaction mixture was then cooled until the pressure dropped to 0 psig (ca. 110 C.) whereupon dilution water was added to dilute the concentrated reaction product. The resulting solution was then cooled to room temperature and drained from the reactor. Analysis of the product mixture was then performed by various chromatographic and spectroscopic procedures as indicated in the specific examples.; Procedure C A magnetically-stirred 70-mL fluoropolymer-lined steel autoclave was fitted with an internal thermocouple capable of determining the temperature of the liquid phase contained in the vessel, a pressure gauge, a pressure-relief valve, and a vent valve. The amine starting material, anhydrous or aqueous sodium 2-hydroxyethanesulfonate, and anhydrous or aqueous sodium hydroxide were charged to the open autoclave, which was then assembled and immersed in an electrically heated oil bath. With the vent valve closed, the stirred reaction mixture was rapidly heated to the reaction temperature and held at that temperature for the times specified in Examples 9, 10, and 13 below. The reaction mixture was then cooled to ambient temperature, the reactor opened, and the reaction product taken up in sufficient water to dissolve all solids., 103-76-4

103-76-4 N-(2-Hydroxyethyl)piperazine 7677, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; Carroll, Glenn T.; Smith, Gary S.; Stringer, Gary E.; US2006/89509; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

1001180-21-7, (R)-tert-Butyl 4-(5-methyl-7-oxo-6,7-dihydro-5H-cyclopenta[d]pyrimidin-4-yl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 9: Triethylamine (4.33 ml, 31.1 mmol; degassed with nitrogen 30 minutes prior to use) and formic acid (1.36 ml, 36.1 mmol; degassed with nitrogen 30 minutes prior to use) were added to a solution of (R)-tert-butyl 4-(5-methyl-7-oxo-6,7-dihydro-5H- cyclopenta[d]pyrimidin-4-yl)piperazine-l-carboxylate (9.75 g, 29.3 mmol) in DCM (210 mL; degassed with nitrogen 30 minutes prior to use). The mixture was stirred for 5 minutes, then a Ru catalyst (0.0933 g, 0.147 mmol) was added. The reaction was stirred under positive nitrogen pressure overnight (18 hours). The reaction mixture was concentrated to dryness and dried on high vacuum. The impure material was flashed on Biotage 65M loaded 1 : 1 DCM:ethyl acetate 500 mL flushed, then 1 :4 DCM:ethyl acetate until product (2nd spot), then gradient to neat ethyl acetate, then 25:1 DCM:MeOH eluted rest of product. The fractions were combined and concentrated on a rotary evaporator. The residue was concentrated again from DCM/hexanes to give a mixture of tert-butyl 4-((5R,7R)-7-hydroxy- 5-methyl-6,7-dihydro-5H-cyclopenta[d]pyrimidin-4-yl)piperazine- 1 -carboxylate (major) and tert-butyl 4-((5R,7S)-7-hydroxy-5-methyl-6,7-dihydro-5H-cyclopenta[d]pyrimidin-4- yl)piperazine-l -carboxylate (minor) (9.35 g, 95.3% yield) as a beige foam. LC/MS (APCI+) m/z 335 [M+H]+. 1H NMR (CDC13) shows 88% de by integration of carbinol methine., 1001180-21-7

1001180-21-7 (R)-tert-Butyl 4-(5-methyl-7-oxo-6,7-dihydro-5H-cyclopenta[d]pyrimidin-4-yl)piperazine-1-carboxylate 59580350, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; GENENTECH, INC.; HOEFLICH, Klaus; MERCHANT, Mark; WO2012/135750; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59702-07-7,1-Methylpiperazin-2-one,as a common compound, the synthetic route is as follows.

4-(5-(4-(difluoromethoxy)phenyl)pyrimidin-2-ylamino)benzoic acid 54 (0.022 mmol), HATU (0.027 mmol) and l-methylpiperazin-2-one (0.022 mmol) are dissolved in dry DMF (0.5 mL) at rt. Diisopropylethylamine (0.06 mmol) is added to the solution. The reaction mixture is stirred for 1 h at rt. HPLC purification affords 4-(4-(5-(4-(difluoromethoxy)phenyl)pyrimidin-2-ylamino)benzoyl)- l-methylpiperazin-2-one Gl as a TFA salt. 1H NMR (400MHz, J6-DMSO) delta 10.1 (s, IH), 8.87 (s, 2H), 7.90 (d, J = 8.4 Hz, 2H), 7.79 (d, J = 8.7 Hz, 2H), 7.43 (d, J = 8.4Hz, 2H), 7.29 (d, J = 8.0 Hz, 2H), 7.12 (t, J = 51.2 Hz, IH), 4.1 (s, 2H), 2.87 (s, 3H), 2.55 (m, 4H). MS (m/z) (M+l)+: 454.2., 59702-07-7

As the paragraph descriping shows that 59702-07-7 is playing an increasingly important role.

Reference：
Patent; IRM LLC; WO2009/26276; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

34770-60-0, 4-Methylpiperazin-2-one is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The reaction conditions for 1-4.3.28 differ: Under argon atmosphere 1-2.2 (250 mg, 0.54 mmol), potassium carbonate (150 mg, 1.07 mmol), copper (I) iodide (10 mg, 0.05 mmol), Nu,Nu’- dimethylethylendiamine (25 L, 0.23 mmol) and 4-methyl-piperazin-2-one (75 mg, 0.66 mmol) in dioxane (10 mL) are heated to 80 C for 8 d. The reaction mixture is filtered and the solution is concentrated. The residue is purified by reversed phase HPLC. Yield 30%, m/z 500 [M+H]+, rt 0.98 min, LC-MS Method V011 S01.

34770-60-0, As the paragraph descriping shows that 34770-60-0 is playing an increasingly important role.

Reference：
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter, Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; BINDER, Florian; VINTONYAK, Viktor; WO2014/140075; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.120737-78-2,tert-Butyl 2-methylpiperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

The 100 mg compound II, 120 mg compound III by adding 5 ml dichloromethane (DCM) in, stirring, 40 C reaction 2 hours, TLC monitoring, after the reaction, the solvent turns on lathe does, the reactant putting into the 100 ml water, ethyl acetate (20 ml × 3) extraction, standing liquid, organic phase are respectively 5% of NaHCO3 (20 Ml × 3), saturated salt water (20 ml × 3) washing, then drying water-free magnesium sulfate, filtered, reduced pressure to remove the ethyl acetate to get the yellow oily compound IV 90 mg.

120737-78-2, As the paragraph descriping shows that 120737-78-2 is playing an increasingly important role.

Reference：
Patent; Southern Medical University; Chen Jianjun; Cheng Binbin; (22 pag.)CN109456284; (2019); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

262368-30-9, N-(4-Aminophenyl)-N-methyl-2-(4-methylpiperazin-1-yl)acetamide is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound (Z) -1- acetyl-3- (methoxy (-2H- tetrahydro-thiopyran-4-yl) methylene) -2-oxo-indole-6-carboxylate Lin ( 600mg, 1.6mmol), 4- (N- methyl-2- (4-methyl-piperazin-1-yl) acetamide) aniline (251mg, 0.96mmol) and potassium hydroxide (50mg, 0.8mmol) was dissolved in 50mL of methanol, the reaction was stirred overnight at 50 deg.] C, the solvent was spin, 50mL of water was added, the mixture with dichloromethane (20mL × 3). the organic phase was dried over anhydrous sodium sulfate, the solvent was spin, the crude product was purified by silica gel column (dichloromethane: methanol = 50: 1) isolated as a dark red solid.(26mg, 3%)

262368-30-9, The synthetic route of 262368-30-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Shandong Hengli medical science and Technology Co Ltd; Luo, haoxian; Wang, aichen; (42 pag.)CN103848814; (2016); B;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

78551-60-7, tert-Butyl 4-benzyl-3-oxopiperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,78551-60-7

To a solution of oxalyl chloride (1.08 g, 8.30 mmol) in CH2CI2 (7 ml) in a dryice-acetone bath was added DMSO (1.14 g, 14.6 mmol). After 5 min, a solution ofthe product of Step 3 (3.01 g, 7.34 mmol) in CH2CI2 (7 ml) was added and the mixturewas stirred for 1 h. Diisopropylethylamine (3.28 g, 25.4 mmol) was added and after 2min the cooling bath was removed. The mixture was stirred for 30 min and dilutedwith water (50 ml). CH2CI2 (40 ml) was added and the aqueous layer was extractedwith CH2CI2 (40 ml). The combined organic layer was washed with brine, dried(MgSC>4), and concentrated to give the aldehyde, which was not further purified.To a solution of diisopropylamine (896 mg, 8.85 mmol) in THF (5 ml) in a dryice-acetone bath was added 1.6 M butyllithium in hexanes (5.5 ml, 8.8 mmol). After 5min the mixture was put in an ice-water bath and stirred for 20 min. The solution wascooled in the dry ice-acetone bath again and a solution of the product of Step 5 (2.14g, 7.37 mmol) in THF (8 ml) was added. The mixture was stirred for 1 h. A solutionof the above aldehyde in THF (10 ml) was added and the mixture was stirred for 1.5h. The reaction was quenched with water and partitioned between ether (4×50 ml)and water (50 ml). The combined organic layer was washed with brine (50 ml), dried(MgSO4), concentrated, and purified by column chromatography (gradientEtOAc/Hexanes 0-20%) to give the product (2.67 g, 52%). MS m/e 698 (M+H)+

The synthetic route of 78551-60-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; SCHERING CORPORATION; WO2006/14762; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.314741-40-7,(S)-tert-Butyl 3-(hydroxymethyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.

A solution of iert-butyldimethylsilyl chloride (1.53 g, 10.17 mmol) in DCM (10 ml) was added dropwise to (5)-4-A/-Boc-2-hydroxymethyl-piperazine (2 g, 9.25 mmol) and triethylamine (2.58 ml, 18.49 mmol) in DCM (50 ml) at 20C over a period of 5 minutes under air. The resulting solution was stirred at 20C for 16 hours then evaporated to dryness. The residue was purified by flash silica chromatography, elution gradient 0 to 5% EtOH in EtOAc. Pure fractions were evaporated to dryness to afford te/t-butyl (S)-3-(((ieri-butyldimethylsilyl)oxy)methyl)piperazine-l-carboxylate (2.84 g, 93%) as a colourless oil. 1H NM (500 MHz, CDCI3) 0.00 (s, 6H), 0.84 (s, 9H), 1.40 (s, 9H), 2.48 (s, 1H), 2.6 – 2.87 (m, 3H), 2.92 (d, J = 11.5 Hz, 1H), 3.41 (dd, J = 7.2, 9.8 Hz, 1H), 3.52 (s, 1H), 3.85 (s, 2H).

314741-40-7, The synthetic route of 314741-40-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ASTRAZENECA AB; KETTLE, Jason, Grant; BAGAL, Sharanjeet, Kaur; BOYD, Scott; EATHERTON, Andrew, John; FILLERY, Shaun, Michael; ROBB, Graeme, Richard; RAUBO, Piotr, Antoni; (144 pag.)WO2018/206539; (2018); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

115619-01-7, 4-(4-Ethylpiperazin-1-yl)phenylamine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 5 (0.10g, 0.48mmol), DIPEA (0.08ml, 0.48mmol) and EtOH (5ml) was mixed with the 85 (0.07g, 0.48mmol) and refluxed for 2.5hrs. The reaction was quenched by saturated NaHCO3 (aq.) and the mixture was extracted by ethyl acetate (30ml x 3). The residue was purified by flash column over silica gel (dichloromethane: methanol = 9: 1, Rf = 0.28) to afford 89 (0.05g, 33.24%) as a pale yellow solid. 1H-NMR (300MHz, CDCl3): delta 1.13 (t, J= 7.2 Hz, 3H), 2.46 (q, J= 7.2 Hz, 2H), 2.62 (t, J= 5.1 Hz, 4H), 2.98 (d, J= 5.1 Hz, 3H), 3.19 (t, J= 5.1 Hz, 4H), 5.17-5.29 (m, 1H), 5.55 (br, 1H), 6.91 (d, J= 8.7 Hz, 2H), 7.37 (d, J= 8.1 Hz, 1H), 7.46 (s, 1H), 8.20 (d, J= 44.7 Hz, 1H)., 115619-01-7

The synthetic route of 115619-01-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; TAIPEI MEDICAL UNIVERSITY; YEN, Yun; LIOU, Jing-Ping; CHEN, Chun-Han; (70 pag.)WO2017/15400; (2017); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics