Month: April 2021

59702-07-7, 1-Methylpiperazin-2-one is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59702-07-7, A solution of N [5-bromo-7- (3-methoxybut-1-yn-1-yl)-1, 3-benzodioxol-4-yl]-7- (3- chloropropoxy) -6-methoxyquinazolin-4-amine (0.12g, 0. 22mmol), 1-methylpiperazin-2-one (0.125g, l. lmmol) and triethylamine (0. 15ml, l. lmmol) in 2-methoxyethanol (2ml) was heated to 80 C overnight followed by heating to 100 C for a further 24 hours. The solvent was evaporated under reduced pressure and the residue was partitioned between dichloromethane and water. The organic layer was separated, dried over magnesium sulfate and evaporated under reduced pressure. Flash chromatography on silica eluting with increasingly polar solutions of methanol (0-8percent) in dichloromethane followed by trituration with diethyl ether gave the product as a racemate and in the form of a cream coloured solid (0.052g). NMR Spectrum : (d6DMSO) 1.43 (d, 3H), 1.96-1. 99 (m, 2H), 2.50-2. 55 (m, 2H), 2.64-2. 69 (m, 2H), 2.82 (s, 3H), 3.01 (s, 2H), 3.25-3. 29 (m, 2H), 3.36 (s, 3H), 3.94 (s, 3H), 4.16-4. 21 (m, 2H), 4.40 (q, 1H), 6.16 (s, 2H), 7.19 (s, 1H), 7.29 (s, 1H), 7.84 (s, 1H), 8.32 (s, 1H), 9.50 (s, 1H). Mass Spectrum : M+HF 626/628.

The synthetic route of 59702-07-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2004/4732; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.103-76-4,N-(2-Hydroxyethyl)piperazine,as a common compound, the synthetic route is as follows.

Example 1: synthesis of 2-(4-(6-chloro-2-methylpyrimidin-4-yl) piperazin-1-yl) ethanol (Compound 4); 1-(2-hydroxyethyl) piperazine (Compound 3) (16.6g, 127.6mmol)) and 2-methyl-4,6-dichloropyrimidine (Compound 2) (10.4g, 63.8mmol) were mixed with methylene dichloride (80mL) in reaction flask to be stirred for 2.5h at 30C, and then triethylamine (1.8mL) was added with the reaction overnight in thermal insulation. After vacuum filtration, the cake was rinsed by methylene dichloride. The filtrate was vacuum condensed to dry, and then n-hexane (40mL) was added to grow the grains for 1h by stirring. After vacuum filtration, the cake was rinsed by n-hexane (20mL) and dried at 40C to constant weight to give white solid target Compound 4 (14.7g, yield: 89.8%). Element analysis: C11H17ClN4O, Calculated: C, 51.46; H, 6.67; N, 21.82; Found: C, 51.45; H, 6.69; N, 21.82.

103-76-4, As the paragraph descriping shows that 103-76-4 is playing an increasingly important role.

Reference£º
Patent; Nanjing Cavendish Bio-Engineering Technology Co., Ltd.; Yan, Rong; EP2532662; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.278788-60-6,(R)-1-Boc-Piperazine-2-carboxylic acid,as a common compound, the synthetic route is as follows.

(2R)-l-(fc/^-Butoxycarbonyl)-4-isopropyIpiperazine-2-carboxylic acidTo (2i?)-l-(tert-butoxycarbonyl)piperazine-2-carboxylic acid (4.5 g) and Na2CO3 (8.32 g) was added dry EtOH (135 ml) and isopropyl iodide (2.16 ml) and the mixture heated at reflux for 18 hours under argon. The solvent was then removed under reduced pressure, 5percentMeO?/DCM (50 ml) added, the mixture stirred for 1 hour in a stoppered flask, filtered and washed through with DCM (2 x 10ml). The filtrate was applied directly to a 12Og- silica Redisep cartridge and purified using 10-70percent MeOH/DCM. After evaporation, the product was isolated as a white foam (4.50 g), which was used without further purification. 1H NMR (400.132 MHz, DMSO) 0.95 (m, 6H), 1.40 (2x s, 9H), 2.30 (m, 2H), 2.75 (m, 2H), 2.95 (t, IH), 3.12 (t, IH,), 3.70 (m, IH), 4.48 (d, IH), 12.60 (br. s, IH).

278788-60-6, As the paragraph descriping shows that 278788-60-6 is playing an increasingly important role.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2007/71952; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

75336-86-6, (R)-2-Methylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

75336-86-6, 15g of compound 6,150 ml of dichloromethane was added to the reaction flask.Cool down to 0 C,Dissolve in 100 mL of dichloromethane16.5g of Boc-anhydride was added to the reaction flask and stirred for 1 hour.Point plate monitoring, after the reaction, filtering,The filtrate was spun dry, added with 100 mL of water, stirred, filtered, and the filtrate was added with saturated 10 g of potassium carbonate and stirred with methyl tert-butyl ether ether.Extract, dry over sodium sulfate, spin dry,Adding petroleum ether, stirring and crystallizing under cooling to obtain 25 g of compound 7;

75336-86-6 (R)-2-Methylpiperazine 7330434, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Tonghua Normal College; Geng Xiaoyu; Xue Mingxing; Zang Hao; Liu Xuekun; Sun Renshuang; Xue Changsong; Zhang Haifeng; (13 pag.)CN109438423; (2019); A;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

2815-34-1, trans-2,5-Dimethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

An NMP solution of fluoro-4-nitrobenzene and (+/-)-trans-2,5-dimethylpiperazine was stirred at an oil bath temperature of 120C for 3 hours to obtain (+/-)-trans-2,5-dimethyl-1-(4-nitrophenyl)piperazine, which was further treated in a similar manner to Example 4 to obtain an objective compound., 2815-34-1

As the paragraph descriping shows that 2815-34-1 is playing an increasingly important role.

Reference£º
Patent; YAMANOUCHI PHARMACEUTICAL CO. LTD.; EP1396487; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

132710-90-8, 1-Boc-4-(3-hydroxypropyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Triphenylphosphine (1.86 g, 7.08 mmol) was charged to a round bottom flask under nitrogen atmosphere and dissolved in dry tetrahydrofuran (40 mL). The solution was cooled to -40 C via an acetonitrile/dry ice bath. After 30 minutes of cooling, DIAD (1.14 g, 7.08 mmol, 1.11 mL) was added dropwise over the course of about 30 minutes. The solution became a slurry of white precipitate and was allowed to stir for 10 minutes at -40 C before 27B (500 mg, 1.42 mmol) and tert-butyl 4-(3- hydroxypropyl)piperazine-l-carboxylate (1.04 g, 4.25 mmol) were added. The reaction continued to stir for 1 hour before the the reaction was pulled from the cooling bath and allowed to warm to room temperature and stir for 3 days. The boc- protected product was precipitated from the reaction with water (150 mL) and isolated by vacuum filtration. The solid was resuspended in TFA (7.45 g, 65.34 mmol, 5 mL) and dichlormethane (5 mL) and stirred overnight. The product was precipitated with MTBE (100 mL) and isolated by filtration to yield 211 mg of Compound 27A (42%) as an off-white solid (2.23m, M+H = 480), 132710-90-8

132710-90-8 1-Boc-4-(3-hydroxypropyl)piperazine 16217800, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; TARVEDA THERAPEUTICS, INC.; CIPRIANI, Tyler; MOREAU, Benoit; BILODEAU, Mark T.; QUINN, James M.; WOOSTER, Richard; CIRELLO, Amanda L.; PERINO, Samantha; WHALEN, Kerry; KADIYALA, Sudhakar; WHITE, Brian H.; (172 pag.)WO2019/118830; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5317-33-9, 3-(4-Methylpiperazin-1-yl)propan-1-ol is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5317-33-9, Step b:4.775 g (30 mmol) of 3-(4-methylpiperazin-1-yl)propan-1-ol are dissolved in 20 ml of dioxane, 20 ml of 4 N HCl in dioxane are added, and the mixture is evaporated to dryness. This residue is triturated in MTBE, filtered off with suction and dried. This solid (6.7 g) is suspended in 50 ml of acetonitrile, and 6 g (30 mmol) of trichloromethy choroformate, dissolved in 10 ml of acetonitrile, are added at 0. The mixture is stirred at room temperature for a further 48 h. The reaction mixture is filtered off with suction, washed with acetonitrile and dried, giving a white solid, m.p. 248-250 (decomposition).

The synthetic route of 5317-33-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK PATENT GESELLSCHAFT MIT BESCHRANKTER HAFTUNG; US2011/269756; (2011); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

109384-27-2, 1-Methylpiperazin-2-one hydrochloride is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

109384-27-2, 6-Chloro-3-[(S)-1-(6-fluoro-1-methyl-1 H-indazol-5-yl)-ethyl]-imidazo[1,2-b]pyridazine(Intermediate E, SO.Omg, 0.152 mmol), KF (26.4mg, 0.455 mmol) and 1-methylperazine-2- one hydrochloride (51.9mg, 0.455 mmol) were suspended in NMP (1 ml_). The RM was stirred at 180 0C for 5 h. The mixture was diluted with EtOAc and washed with NaHCO3 10% (2 x) and water (4 x). The combined organic layers were dried over Na2SO4, filtered and concentrated. The residue was purified by flash chromatography and afforded the title compound as a light brown foam (tR 3.66 min (conditions 5), (tR 12.22 min (conditions 2), MH+ = 408.2, 1H-NMR in DMSO-d6: 7.92 (s, 1 H); 7.83 (d, 1 H); 7.49 (m, 3H); 7.11 (d, 1 H); 4.78 (m, 1H); 4.00 (d, 1H); 3.95 (S1 3H); 3.86 (d, 1 H); 3.67 (m, 2H); 3.30 (m, 2H); 2.80 (s, 3H); 1.71 (d, 3H)).

109384-27-2 1-Methylpiperazin-2-one hydrochloride 17060766, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; NOVARTIS AG; FURET, Pascal; McCARTHY, Clive; SCHOEPFER, Joseph; STUTZ, Stefan; WO2011/15652; (2011); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

278788-66-2, (R)-tert-Butyl 3-(hydroxymethyl)piperazine-1-carboxylate is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Example 32(R)-4-(2-ChIoro-acetyl)-3-hydroxymethyl-piperazine-l-carboxylic acid tert-butyl esterTo a solution of (i?)-3-hydroxymethyl-piperazine-l-carboxylic acid tert-butyl ester (795 mg, 3.68 mmol) in DCM (20 mL) was added triethylamine (1.53 mL, 11.04 mmol). The resulting mixture was cooled to 0 0C before the dropwise addition of chloroacetyl chloride (325 muL, 4.05 mmol). The mixture was warmed to RT and stirred for 5 h. The reaction mixture was partitioned between a saturated aqueous solution OfNaHCO3 and DCM and the aqueous layer extracted with further DCM. The combined organic fractions were dried (Na2SO4) and concentrated in vacuo. The resulting residue was purified by column chromatography to give the title compound as a colourless oil which was a mixture of rotamers (710 mg, 66%).1H NMR (400 MHz, CDCl3): delta 1.48 (s, 9H), 2.80-2.92 (m, IH), 2.95-3.10 (m, 2H), 3.34-3.44 (m, 1AH), 3.60-3.74 (m, 21Z2H), 3.96-4.16 (m, 31AH), 4.22-4.30 (m, ‘/2H)5 4.32-4.40 (m, Y2H) and 4.63 (bs, VzYi)., 278788-66-2

The synthetic route of 278788-66-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F.HOFFMANN-LA ROCHE AG; WO2009/53716; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.509073-62-5,tert-Butyl 4-(4-nitrobenzoyl)piperazine-1-carboxylate,as a common compound, the synthetic route is as follows.,509073-62-5

tert-Bupsilontyl 4-(4-nitrobenzoyl)piperazine-1-carboxylate (12.9 g, 38.5 mmol) was dissolved in methanol (150 ml) and transferred into a 500-ml PARR flask. The flask was flushed with nitrogen, 10% Pd/C (0.38 g, 0.357 mmol) was added, flushed again with nitrogen, then hydrogen, then hydrogenate for 17 hours while shaking. (H2 pressure 50 psi). The reaction mixture was filtered through CELITE, the CELITE washed with MeOH and the collected liquids concentrated in vacuum. 11.67 g of tert- butyl 4-(4-amino-benzoyl)piperazine-1-carboxylate were isolated as a beige solid. MS (ESI) m/z 306 (M+H). 1H NMR (CDCl3) delta ppm 7.25 (d, 2 H, J= 7.7), 6.64 (d, 2 H, J= 7.7), 3.89 (bs, 2 H), 3.58 (bs, 4 H), 4.43 (bs, 4H), 1.46 (s, 9H).

As the paragraph descriping shows that 509073-62-5 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; PURANDARE, Ashok, Vinayak; BATT, Douglas, G.; LIU, Qingjie; JOHNSON, Walter, L.; MASTALERZ, Harold; ZHANG, Guifen; ZIMMERMANN, Kurt; WO2010/80474; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics